- Analytical Syringes
- GC Columns, Accessories & Adsorbents
- HPLC Columns
- LPLC Media & Accessories
- Acids
- Syringe Filters
- Glassware
- Liquid Handling & Dispensing
- Laboratory Containers & Storage
- Laboratory Labels
- Laboratory Stirring & Mixing
- Сортировать:
- Вид таблицей
-
SGE Plunger-Protected Syringe, Fixed Needle 21933-U
NACRES: NB.03 General descriptionExtended protection tube from top of the flange to help prevent plunger bending during injection.Параметрыmaterial bevel tip needle, glass syringe needle size 26 ga feature syringe type Plunger-protection packaging pkg of 1 x 1 ea (21933-U) Торговая марка SGE 10F, needle L 50 mm volume 10 μL
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SGE Plunger-Protected Syringe, Fixed Needle 21934-U
NACRES: NB.03 General descriptionExtended protection tube from top of the flange to help prevent plunger bending during injection.Параметрыmaterial bevel tip stainless steel needle needle size 26 ga feature syringe type Plunger-protection packaging pkg of 1 x 6 ea (21934-U) Торговая марка SGE 10F, needle L 50 mm volume 10 μL
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Swagelok® Connector to Male NPT 22084-U
eCl@ss: 32035302 NACRES: SB.54 General descriptionNuts and ferrules included.Legal InformationSwagelok is a registered trademark of Swagelok CompanyПараметрыmaterial stainless steel packaging pkg of 1 ea Торговая марка fitting 1/8 in. Swagelok, 1/8 in. male NPT
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Swagelok® Connector to Male NPT 22085-U
eCl@ss: 32035302 NACRES: SB.54 General descriptionNuts and ferrules included.Legal InformationSwagelok is a registered trademark of Swagelok CompanyПараметрыmaterial stainless steel packaging pkg of 1 ea Торговая марка fitting 1/4 in. Swagelok, 1/8 in. male NPT
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Swagelok® Connector to Male NPT 22700-U
eCl@ss: 32035302 NACRES: SB.54 General descriptionNuts and ferrules included.Legal InformationSwagelok is a registered trademark of Swagelok CompanyПараметрыmaterial stainless steel packaging pkg of 1 ea Торговая марка fitting 1/4 in. Swagelok, 1/4 in. male NPT
Safety InformationRIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
Swagelok® Connector to Male NPT 25830
eCl@ss: 32035302 General descriptionSwagelok® connector to male NPT is a tube fitting, which delivers a leak-tight, gas-tight seal in an easy-to-install, disassemble and reassemble form. The robust tube grip with patented, two-ferrule technology is resistant to vibration fatigue and withstands high pressures and temperature extremes.
Nuts and ferrules included.Legal InformationSwagelok is a registered trademark of Swagelok CompanyПараметрыmaterial stainless steel packaging pkg of 1 ea Торговая марка fitting 1/2 in. Swagelok, 1/4 in. male NPT Узнать цену -
TSKgel® SP-2SW HPLC Column 807165
eCl@ss: 32110501 General descriptionTSKgel® SP-2SW columns are packed with 5 micron, high efficiency, spherical silica beads which are surface modified with a strong cation exchanger. They are used for the separation and analysis of small proteins, peptides, nucleosides, and other biologically active molecules.ApplicationTSKgel® SP-2SW HPLC column may be used as a cation exchanger column in the determination of histamine in biological materials by high-performance liquid chromatography (HPLC).Physical formShipped in methanol.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationTSKgel is a registered trademark of Tosoh CorporationПараметрыmaterial stainless steel hardware Agency/Method suitable for USP L52, suitable for USP L9 product line TSKgel® feature counter ion Na+ Торговая марка Tosoh SP-2SW, parameter 1 M salt concentration, 0-100% organic solvent, 1.0 mL/min flow rate, 10-45 °C temperature, 150 bar max. pressure application(s) HPLC: suitable L x I.D. 25 cm x 4.6 mm matrix silica particle platform matrix active group sulfonic acid phase particle size 5 µm pore size 125 A operating pH 2.0 - 7.5 separation technique cation exchange Узнать цену -
TOYOPEARL® AF-Formyl-650M Bulk Media 808004
General descriptionToyopearl AF-Formyl-650 resin is a reactive resin which binds exclusively to primary amines to form a stable secondary amine linkage.Physical formShipped in 20% (v/v) ethanol.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationToyopearl is a registered trademark of Tosoh CorporationПараметрыdescription AF-Formyl-650M, Phase filter (Formyl), Shipping solvent (20% (v/v) ethanol) product line TOYOPEARL® form aqueous slurry in 1% glutaraldehyde packaging bottle of 25 mL Торговая марка Tosoh 08004, Tosoh TOYOPEARL® AF, extent of labeling 40-70 µeq/mL ligand density parameter 3 bar pressure application(s) LPLC: suitable matrix hydroxylated methacrylic polymer matrix active group Ligand density: 40 - 70 µeq/mL, aldehyde phase particle size 65 µm pore size 1000 A pH range 6 - 9 separation technique affinity storage temp. 2-8°C
Safety InformationWGK Germany WGK 3 Flash Point F 102.2 °F Flash Point C 39 °C Узнать цену -
TSKgel® Chelate-5PW Guardgel Kit 808647
General descriptionHigh efficiency, resin-based TSKgel affinity columns (10 µm particles) separate or purify many enzymes and other proteins.
TSKgel Chelate-5PW columns utilize the tendency of iminodiacetic acid (IDA) to form a complex with metal ions, such as Zn2+, Ni2+ and Cu2+. The column is loaded with divalent metal ions by chelation. Peptides and proteins containing histidine residues will normally adsorb to these chelated ions at neutral pH. The retained compounds can be eluted with buffer containing imidazole or glycine. The key to making successful use of this retention mechanism is the proper selection of metal ions for chelation and the elution buffer to desorb the analytes. In general, Cu2+, interacts better with proteins; however, resolution is usually enhanced with Zn2+. A gradient mobile phase containing increasing imidazole or glycine concentrations is used to elute the retained compounds. Alternatively, a decreasing pH gradient can be used for elution purposes as well.
Applications include: immunoglobulins, transferrin, lectins, milk proteins, membrane proteins and peptides.ComponentsTSKgel Guardgel kits contain:- 5 mL Guardgel packing material
- Column holder, consisting of external reducing union, cap, frit, 2 ferrules
- Column, 25 mm x 9.5 mm OD x 6 mm ID, 2 µm frit at 10 mm depth, 1/16"
- 2 Replacement frits
- Capillary tubing, 5 cm x 1/16" OD x 0.01"
- Nuts and ferrules, 10-32 threads for 1/16" tubing, 2 each
- All hardware is 316 stainless steel
Dimensions for Guardgel kits for 21.5 mm ID columns:- Column, 35 mm x 12.75 mm OD x 10 mm ID, 10 µm frit at 20mm depth, 1/16"
- Capillary tubing, 5 cm x 1/16" OD x 0.02" ID
Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationTSKgel is a registered trademark of Tosoh CorporationПараметрыmaterial PEEK product line TSKgel® Торговая марка Tosoh Chelate-5PW, extent of labeling 20 µmol/mL resin ligand density parameter 20% organic solvent, 3 M salt concentration, 45 °C temperature application(s) LPLC: suitable L x I.D. 2.5 cm x 6 mm matrix polymer particle platform matrix active group iminodiacetic acid phase particle size 20 µm operating pH 2 - 12 compatibility mode of use affinity HPLC separation technique affinity Узнать цену -
TOYOPEARL® AF-Chelate-650M Bulk Media 814475
General descriptionToyopearl AF-Chelate-650 resin is derivatized with iminodiacetic acid for immobilized metal affinity chromatography or IMAC.IMAC works primarily by binding to histidine and free cysteine containing sequences of proteins or peptides.ApplicationTOYOPEARL® Affinity Media are used in affinity chromatography, protein chromatography and activated/functionalized matrices.SpecificationsClean in place with 0.5 M NaOH or 0.1 M HCl.Physical formShipped in 20% (v/v) ethanol.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationToyopearl is a registered trademark of Tosoh CorporationПараметрыdescription AF-Chelate-650M product line TOYOPEARL® packaging bottle of 25 mL Торговая марка Tosoh TOYOPEARL® AF, extent of labeling 25-45 µeq/mL ligand density parameter 3 bar max. pressure application(s) HPLC: suitable matrix hydroxylated methacrylic polymer matrix active group IDA phase, iminodiacetic acid particle size 65 µm operating pH 2 - 12 separation technique affinity storage temp. 2-8°C
Safety Informationpictograms GHS02 signalword Warning hcodes H226 RIDADR UN 1993C 3 / PGIII WGK Germany WGK 3 Flash Point F 96.8 °F - closed cup Flash Point C 36 °C - closed cup Узнать цену -
Whatman® Uniflo® 13 syringe filters WHA9916-1302
NACRES: NB.24 General descriptionReady to use disposable filtration device for removing solids from liquid samples. For example for filtering samples prior to analysis such as HPLC, UV/Vis spectrophotometry etc.,Other NotesSuitable for volumes of 10 mL or lessLegal InformationUNIFLO is a registered trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial polyethersulfone membrane sterility sterile packaging pack of 100 ea Торговая марка diam. 13 mm pore size 0.2 µm Узнать цену -
Whatman® Uniflo® 13 syringe filters WHA9916-1304
NACRES: NB.24 General descriptionReady to use disposable filtration device for removing solids from liquid samples. For example for filtering samples prior to analysis such as HPLC, UV/Vis spectrophotometry etc.,Other NotesSuitable for volumes of 10 mL or lessLegal InformationUNIFLO is a registered trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial polyethersulfone membrane sterility sterile packaging pack of 100 ea Торговая марка diam. 13 mm pore size 0.45 µm Узнать цену -
Ace cold trap inner body only for condenser "C" and "CR" assemblies Z682136-1EA
NACRES: NB.43 General descriptionThe cold trap inner body for the Ace condenser "C" and "CR" assemblies, fit with the Ace cold trap outer body, Z682128 or Z682071.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыmaterial glass Торговая марка Bchi equivalent, Узнать цену -
Ace cold trap outer body only for condenser "C" assembly Z682071-1EA
NACRES: NB.43 General descriptionThe cold trap outer body for the Ace condenser "C" assembly, is glass with a 35/20 inner spherical joint bottom connection that attaches to the receiver flasks. Features standard top and side flange that connects directly to the Buchi rotary evaporator.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыmaterial plastic-coated glass Торговая марка Bchi equivalent, Узнать цену -
Ace cold trap outer body only for condenser "C" assembly Z682128-1EA
NACRES: NB.43 General descriptionThe cold trap outer body for the Ace condenser "C" assembly, is glass with a 35/20 inner spherical joint bottom connection that attaches to the receiver flasks. Features standard top and side flange that connects directly to the Buchi rotary evaporator.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыmaterial glass Торговая марка Bchi equivalent, Узнать цену -
Ace cold trap outer body only for condenser "CR" assembly Z682292-1EA
NACRES: NB.43 General descriptionThe cold trap outer body for the Ace condenser "CR" assembly, is glass with a 45/50 inner joint to fit into the distribution head and fits the Buchi® rotary evaporators.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыmaterial glass Торговая марка Bchi equivalent, Узнать цену -
Ace glass steam tube, for condenser "C", "CR", "A" and "V" assemblies Z682403-1EA
NACRES: NB.43 General descriptionThe glass steam tube accessory fits the Buchi condenser assemblies, "C", "CR", "A" and "V", and works with Buchi Rotavapor models R-200/R-205 and R-114/R-144.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыТорговая марка Bchi equivalent, Узнать цену -
Ace lower distribution head with shut-off valve for condenser "CR" assembly Z682306-1EA
NACRES: NB.43 General descriptionThe lower distribution head for the Ace condenser "CR" assembly, and fits the Buchi® rotary evaporators.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыmaterial glass Торговая марка Bchi equivalent, Узнать цену -
Ace receiving flask adapter Z682187-1EA
NACRES: NB.43 General descriptionThe receiving flask adapter fits condenser assemblies "C", "CR", "A", and "V" for Buchi® evaporator models R-200/205. Adapter clip: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS24/40 Торговая марка Bchi equivalent, Узнать цену -
Ace receiving flask adapter Z682195-1EA
NACRES: NB.43 General descriptionThe receiving flask adapter fits condenser assemblies "C", "CR", "A", and "V" for Buchi® evaporator models R-200/205. Adapter clip: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS24/40 Торговая марка Bchi equivalent, Узнать цену -
Ace receiving flask adapter Z682209-1EA
NACRES: NB.43 General descriptionThe receiving flask adapter fits condenser assemblies "C", "CR", "A", and "V" for Buchi® evaporator models R-200/205. Adapter clip: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS29/32 Торговая марка Bchi equivalent, Узнать цену -
Ace receiving flask adapter Z682217-1EA
General descriptionThe receiving flask adapter fits condenser assemblies "C", "CR", "A", and "V" for Buchi® evaporator models R-200/205. Adapter clip: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS29/42 Торговая марка Bchi equivalent, Узнать цену -
Ace rotary evaporator condenser complete "A" assembly Z682330-1EA
NACRES: NB.43 General descriptionThe complete "A" evaporator condenser assembly includes the main glass condenser body with inner coil for angled installation, GL threaded caps and hose barbs. Bottom joint is 35/20. It is designed to fit Buchi® evaporator models 200/205 and series 114-144.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыmaterial glass Торговая марка Bchi equivalent, Узнать цену -
Ace rotary evaporator condenser complete "C" assembly Z682055-1EA
General descriptionThe "C" condenser assembly consists of the main glass outer trap body with a 35/20 inner spherical joint bottom connection that attaches to the receiver flasks.
Features standard top and side flange that connects directly to the Buchi® rotary evaporator. The assembly also includes the glass cold trap inner body, PTFE sealing ring with Viton® O-rings, PTFE lid and hose barbs with GL threaded caps.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AG
Viton is a registered trademark of E. I. du Pont de Nemours and CompanyПараметрыmaterial plastic-coated glass Торговая марка Bchi equivalent, Узнать цену -
Ace rotary evaporator condenser complete "C" assembly Z682063-1EA
NACRES: NB.43 General descriptionThe "C" condenser assembly consists of the main glass outer trap body with a 35/20 inner spherical joint bottom connection that attaches to the receiver flasks.
Features standard top and side flange that connects directly to the Buchi® rotary evaporator. The assembly also includes the glass cold trap inner body, PTFE sealing ring with Viton® O-rings, PTFE lid and hose barbs with GL threaded caps.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AG
Viton is a registered trademark of E. I. du Pont de Nemours and CompanyПараметрыmaterial plastic-coated glass Торговая марка Bchi equivalent, Узнать цену -
Ace rotary evaporator condenser complete "C" assembly Z682098-1EA
NACRES: NB.43 General descriptionThe "C" condenser assembly consists of the main glass outer trap body with a 35/20 inner spherical joint bottom connection that attaches to the receiver flasks.
Features standard top and side flange that connects directly to the Buchi® rotary evaporator. The assembly also includes the glass cold trap inner body, PTFE sealing ring with Viton® O-rings, PTFE lid and hose barbs with GL threaded caps.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AG
Viton is a registered trademark of E. I. du Pont de Nemours and CompanyПараметрыmaterial glass Торговая марка Bchi equivalent, Узнать цену -
Ace rotary evaporator condenser complete "C" assembly Z682101-1EA
NACRES: NB.43 General descriptionThe "C" condenser assembly consists of the main glass outer trap body with a 35/20 inner spherical joint bottom connection that attaches to the receiver flasks.
Features standard top and side flange that connects directly to the Buchi® rotary evaporator. The assembly also includes the glass cold trap inner body, PTFE sealing ring with Viton® O-rings, PTFE lid and hose barbs with GL threaded caps.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AG
Viton is a registered trademark of E. I. du Pont de Nemours and CompanyПараметрыmaterial glass Торговая марка Bchi equivalent, Узнать цену -
Ace rotary evaporator condenser complete "CR" assembly Z682276-1EA
NACRES: NB.43 General descriptionThis "CR" condenser assembly is similar to the "C" assembly except that the bottom joint is 45/40 inner to fit into a separate distribution head. The complete "CR" assembly consists of the main glass outer trap body, glass cold trap inner body, PTFE sealing ring with Viton® O-rings, PTFE lid and hose barbs with GL threaded caps.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AG
Viton is a registered trademark of E. I. du Pont de Nemours and CompanyПараметрыmaterial glass Торговая марка Bchi equivalent, Узнать цену -
Ace rotary evaporator condenser complete "V" assembly Z682365-1EA
General descriptionIncludes 1 L receiving flask and clamp.
This complete "V" evaporator condenser assembly includes:
The main glass condenser body with inner coil for vertical installation, O-ring, 1 L receiving flask, stainless steel clamp, GL threaded caps and hose barbs. Bottom joint is 35/20. It is designed to fit the Buchi® evaporator models 200/205 and series 114-144.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыmaterial plastic-coated glass Торговая марка Bchi equivalent, Узнать цену -
Ace rotary evaporator condenser complete "V" assembly Z682373-1EA
NACRES: NB.43 General descriptionThis complete "V" evaporator condenser assembly includes:
The main glass condenser body with inner coil for vertical installation, O-ring, 1 L receiving flask, stainless steel clamp, GL threaded caps and hose barbs. Bottom joint is 35/20. It is designed to fit the Buchi® evaporator models 200/205 and series 114-144.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыmaterial glass Торговая марка Bchi equivalent, Узнать цену -
Ace vapor duct tube, for condenser "A" assembly Z682411-1EA
NACRES: NB.43 General descriptionThe vapor duct tube accessories are for Buchi® condenser "A" assemblies, and will fit either Buchi evaporator models R-210/R-215 or R-114/R-144.
Combi-clips: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS24/40 Торговая марка Bchi equivalent, L 160 mm Узнать цену -
Ace vapor duct tube, for condenser "A" assembly Z682438-1EA
NACRES: NB.43 General descriptionThe vapor duct tube accessories are for Buchi® condenser "A" assemblies, and will fit either Buchi evaporator models R-210/R-215 or R-114/R-144.
Combi-clips: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS29/32 Торговая марка Bchi equivalent, L 160 mm Узнать цену -
Ace vapor duct tube, for condenser "A" assembly Z682462-1EA
NACRES: NB.43 General descriptionThe vapor duct tube accessories are for Buchi® condenser "A" assemblies, and will fit either Buchi evaporator models R-210/R-215 or R-114/R-144.
Combi-clips: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS24/40 Торговая марка Bchi equivalent, L 160 mm Узнать цену -
Ace vapor duct tube, for condenser "A" assembly Z682470-1EA
NACRES: NB.43 General descriptionThe vapor duct tube accessories are for Buchi® condenser "A" assemblies, and will fit either Buchi evaporator models R-210/R-215 or R-114/R-144.
Combi-clips: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS29/32 Торговая марка Bchi equivalent, L 160 mm Узнать цену -
Ace vapor duct tube, for condenser "V" assembly Z682497-1EA
NACRES: NB.43 General descriptionThe vapor duct tube accessories are for Buchi condenser "V" assemblies, and will fit either Buchi Rotavapor model R-210/R-215 or R-114/R-144.
Combi-clips: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS24/40 Торговая марка Bchi equivalent, L 45 mm Узнать цену -
Ace vapor duct tube, for condenser "V" assembly Z682500-1EA
NACRES: NB.43 General descriptionThe vapor duct tube accessories are for Buchi condenser "V" assemblies, and will fit either Buchi Rotavapor model R-210/R-215 or R-114/R-144.
Combi-clips: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS29/32 Торговая марка Bchi equivalent, L 45 mm Узнать цену -
Ace vapor duct tube, for condenser "V" assembly Z682519-1EA
NACRES: NB.43 General descriptionThe vapor duct tube accessories are for Buchi condenser "V" assemblies, and will fit either Buchi Rotavapor model R-210/R-215 or R-114/R-144.
Combi-clips: not included.Legal InformationBuchi is a registered trademark of Buchi Labortechnik AGПараметрыJoint Joint: ST/NS29/42 Торговая марка Bchi equivalent, L 45 mm Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
