Каталог
Товары в наличии
Производители
Измерительные приборы
Перемешивание и встряхивание
Отбор проб и пробоподготовка
Перегонка, разделение и фильтрование
Нагревание и охлаждение
Дозирование жидкостей
Вакуумная техника
Микроскопы и оптика
Оборудование для очистки воды
Оборудование для очистки, дезинфекции и стерилизации
Анализ продуктов питания, воды и почв
Микробиология и биотехнология
Хроматография: приборы и принадлежности
Расходные материалы для лабораторий
Охрана труда и безопасность в лаборатории
Оборудование для фармацевтических и пищевых производств
Пилотное производство
Приборы для измерения крутящего момента
Лабораторная посуда
Мебель лабораторная
Химреактивы
В наличии
Тестеры контроля качества фармацевтических препаратов
Sigma-Aldrich
Новинки
Cytiva
- Биореакторы (сосуды) для культур клеток Cytiva
- Клеточные культуры Cytiva
- Электрофорез Cytiva
- Импортные химические реактивы Merck, Acros, Alfa Aesar, Scharlau, Fluka, Sigma, Aldrich и другие Cytiva
- Аналитические стандарты Cytiva
- Laboratory Filter Holders Cytiva
- Расходные материалы для фильтрации Cytiva
- Расходные материалы для хроматографии Cytiva
- Carbohydrates Cytiva
- Хроматографические смолы для препаративной/процессной хроматографии Cytiva
- Фильтрационные модули и капсулы для биопроцесса (глубинные, мембранные, стерилизующие) Cytiva
- Тангенциальные фильтрационные кассеты (TFF) Cytiva
- Колонки и системы для препаративной/процессной хроматографии (биопроцесс) Cytiva
- Cell Culture Supplies Cytiva
- Biological Buffers Cytiva
- Centrifugal Filters Cytiva
- Filter Paper Cytiva
- Filter Membranes Cytiva
- Syringe Filters Cytiva
- Vacuum Filters Cytiva
- Balances Cytiva
- Cytiva„ Products Cytiva
- Secondary Antibodies Cytiva
- Пластик и стекло для культур клеток Cytiva
- Сортировать:
- Вид таблицей
-
Whatman® glass microfiber filtration funnel WHA1950007
NACRES: NB.24 General description3-Piece filter funnel
The increased use of high-efficiency glass microfiber filters in modern laboratories has created a demand for simple and effective filter-holding systems. Whatman 3-Piece filter funnels have been designed to complement the range of Whatman fine particle retention, rapid flow rate glass microfiber filters.
Functional design - The funnel is quickly dismantled ready for the insertion of a new filter. The glass sealing flanges of the funnel and reservoir are ground flat to ensure a good filter seal.
Positive filter clamping - All retained solids are deposited within the filter circle. Edge clamping prevents peripheral loss and possible passage of solution around, rather than through, the filter circle.
Simple to clean - The parts can be quickly and efficiently cleaned because of the simplicity of the design.
A choice of three plates - For quick and easy filtration, Whatman 3-Piece filter funnels are available with a choice of three plates. They also come in several sizes to match your needs.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationWhatman is a registered trademark of CytivaПараметрыfeature Filter Funnel, 3-piece packaging pkg of 1 ea Торговая марка Cytiva, Whatman 1950-007, Whatman Article No. 28418623 (US reference) diam. 70 mm volume 115 mL capacity 115 mL Узнать цену -
Whatman® glass microfiber filtration funnel WHA1950009
NACRES: NB.24 General description3-Piece filter funnel
The increased use of high-efficiency glass microfiber filters in modern laboratories has created a demand for simple and effective filter-holding systems. Whatman 3-Piece filter funnels have been designed to complement the range of Whatman fine particle retention, rapid flow rate glass microfiber filters.
Functional design - The funnel is quickly dismantled ready for the insertion of a new filter. The glass sealing flanges of the funnel and reservoir are ground flat to ensure a good filter seal.
Positive filter clamping - All retained solids are deposited within the filter circle. Edge clamping prevents peripheral loss and possible passage of solution around, rather than through, the filter circle.
Simple to clean - The parts can be quickly and efficiently cleaned because of the simplicity of the design.
A choice of three plates - For quick and easy filtration, Whatman 3-Piece filter funnels are available with a choice of three plates. They also come in several sizes to match your needs.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationWhatman is a registered trademark of CytivaПараметрыfeature Filter Funnel, 3-piece packaging pkg of 1 ea Торговая марка Cytiva, Whatman 1950-009, Whatman Article No. 28418624 (US reference) diam. 90 mm volume 200 mL capacity 200 mL Узнать цену -
Whatman® glass microfiber filtration funnel WHA1950017
NACRES: NB.24 General description3-Piece filter funnel
The increased use of high-efficiency glass microfiber filters in modern laboratories has created a demand for simple and effective filter-holding systems. Whatman 3-Piece filter funnels have been designed to complement the range of Whatman fine particle retention, rapid flow rate glass microfiber filters.
Functional design - The funnel is quickly dismantled ready for the insertion of a new filter. The glass sealing flanges of the funnel and reservoir are ground flat to ensure a good filter seal.
Positive filter clamping - All retained solids are deposited within the filter circle. Edge clamping prevents peripheral loss and possible passage of solution around, rather than through, the filter circle.
Simple to clean - The parts can be quickly and efficiently cleaned because of the simplicity of the design.
A choice of three plates - For quick and easy filtration, Whatman 3-Piece filter funnels are available with a choice of three plates. They also come in several sizes to match your needs.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationWhatman is a registered trademark of CytivaПараметрыfeature Filter Funnel, 3-piece packaging pkg of 1 ea Торговая марка Cytiva, Whatman 1950-017, Whatman Article No. 28418626 (US reference) diam. 70 mm volume 210 mL capacity 210 mL Узнать цену -
Whatman® glass microfiber filtration funnel WHA1950109
NACRES: NB.24 General description3-Piece filter funnel
The increased use of high-efficiency glass microfiber filters in modern laboratories has created a demand for simple and effective filter-holding systems. Whatman 3-Piece filter funnels have been designed to complement the range of Whatman fine particle retention, rapid flow rate glass microfiber filters.
Functional design - The funnel is quickly dismantled ready for the insertion of a new filter. The glass sealing flanges of the funnel and reservoir are ground flat to ensure a good filter seal.
Positive filter clamping - All retained solids are deposited within the filter circle. Edge clamping prevents peripheral loss and possible passage of solution around, rather than through, the filter circle.
Simple to clean - The parts can be quickly and efficiently cleaned because of the simplicity of the design.
A choice of three plates - For quick and easy filtration, Whatman 3-Piece filter funnels are available with a choice of three plates. They also come in several sizes to match your needs.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationWhatman is a registered trademark of CytivaПараметрыmaterial polypropylene plate packaging pk of 1 Торговая марка Cytiva, Whatman 1950-109, Whatman Article No. 28418630 (US reference) diam. 90 mm Узнать цену -
Whatman® microbiological filtration system MBS WHA10445900
NACRES: NB.24 General descriptionMBS I is an excellent system for optimal microbiological control using membranes. The overall procedure time is reduced to a minimum. The design of the system, which consists of an electrical membrane dispenser, a funnel dispenser, and a vacuum manifold, leads to more reproducible results.
The special sealing technique ensures easy handling and a good integrity of the funnel and membrane during filtration. This reduces any cross contamination to a minimum.
Features and Benefits- Simple to use
- Safe sealing mechanism
- Shorter preparation time
- High reproducibility
- Funnels can be autoclaved up to 50 times
- Large funnel capacity for foaming liquids
- Easier to validate
- Risk of cross contamination is minimized
- A combination of comfort and progress
The combination of the funnel dispenser and the Membrane-Butler E in the MBS I system is unique. When a funnel is taken from the dispenser, the butler automatically dispenses a membrane from the sterile pack ready to use.
Find the right funnel
The autoclavable plastic funnel for the MBS I is a true innovation. Unlike tedious flaming of stainless steel filtration equipment for sterilization, the new funnel is simple to use and ensures sterility. The new funnels are provided sterile in a magazine and save time especially when a large number of samples need to be processed by one apparatus.
The funnels (350 mL) are of high grade polypropylene and can be autoclaved up to 50 times. For applications in which funnels are only used once, the system offers another solution: a 100 mL funnel which is presterilized and supplied ready for immediate use. A special closure mechanism at the extraction edge ensures that the funnel seals tightly with the membrane.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationWhatman is a registered trademark of CytivaПараметрыmaterial nitrocellulose membrane, polypropylene housing (plastic funnel) feature MBS II 100 ml PP-funnels with integrated membrane / NC, 0.45 µm, white packaging pkg of 1 ea Торговая марка Cytiva, Whatman 10445900, Whatman Article No. 28415629 (US reference) funnel capacity 100 mL pore size 0.45 µm Узнать цену -
Whatman® multiple vacuum filtration device WHA10445835
NACRES: NB.24 Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationWhatman is a registered trademark of CytivaПараметрыmaterial stainless steel , stainless steel housing feature 47/50, support screen packaging pk of 1 Торговая марка Cytiva, Whatman 10445835, Whatman Article No. 28415611 (US reference) capacity 500 mL Узнать цену -
Whatman® multiple vacuum filtration device WHA10445850
NACRES: NB.24 Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationWhatman is a registered trademark of CytivaПараметрыmaterial stainless steel , stainless steel housing feature 47/50, support screen packaging pk of 1 Торговая марка Cytiva, Whatman 10445850, Whatman Article No. 28415613 (US reference) capacity 100 mL Узнать цену -
Whatman® pressure filtration devices, MD 050 WHA10450003
NACRES: NB.24 Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationWhatman is a registered trademark of CytivaПараметрыpackaging pkg of 1 ea Торговая марка Cytiva, Whatman 10450003, Whatman Article No. 28415677 (US reference) Узнать цену -
Whatman® Vacuum filtration apparatus accessories WHA10477600
NACRES: NB.24 Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationWhatman is a registered trademark of CytivaПараметрыpackaging pk of 1 Торговая марка Cytiva, Whatman 10477600, Whatman Article No. 28415989 (US reference) Узнать цену -
Ficoll® Paque Plus GE17-1440-03
NACRES: NA.25 General descriptionFicoll-Paque Plus is a recognized standard in laboratories worldwide for the isolation of human lymphocytes for in vitro studies.
Ficoll-Paque PLUS is a ready to use, sterile medium for isolation of lymphocytes in high yield from peripheral blood using a simple and rapid centrifugation procedure. It maintains the viability and a representative distribution of B and T lymphocytes.ApplicationFor in vitro isolation of lymphocytes from human peripheral blood.Features and Benefits- Ready to use sterile medium for isolation of human lymphocytes in high yield from peripheral blood.
- Maintains viability and representative distribution of B and T lymphocytes.
- Low levels of endotoxin (< 0.12 EU/mL).
Storage and StabilityStore at 4 to 30 °C ()Legal InformationFicoll is a registered trademark of CytivaПараметрыform liquid shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 6 x 500 mL Торговая марка Cytiva color Colorless to slightly yellow pH range 5.5 - 7.5
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Ficoll® Paque Plus GE17-1440-02
NACRES: NA.25 General descriptionFicoll-Paque Plus is a recognized standard in laboratories worldwide for the isolation of human lymphocytes for in vitro studies.
Ficoll-Paque PLUS is a ready to use, sterile medium for isolation of lymphocytes in high yield from peripheral blood using a simple and rapid centrifugation procedure. It maintains the viability and a representative distribution of B and T lymphocytes.ApplicationFor in vitro isolation of lymphocytes from human peripheral blood.Features and Benefits- Ready to use sterile medium for isolation of human lymphocytes in high yield from peripheral blood.
- Maintains viability and representative distribution of B and T lymphocytes.
- Low levels of endotoxin (< 0.12 EU/mL).
Storage and StabilityStore at 4 to 30 °C ()Legal InformationFicoll is a registered trademark of CytivaПараметрыform liquid shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 6 x 100 mL Торговая марка Cytiva color Colorless to slightly yellow pH range 5.5 - 7.5
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Ficoll®-Paque Premium GE17-5442-03
NACRES: NA.25 General descriptionFicoll-Paque PREMIUM products are a range of sterile, ready-to-use density gradient media for the preparation of mononuclear cells.
Ficoll-Paque PREMIUM products are based on Ficoll-Paque PLUS (see Ficoll-Paque PLUS) which has been used for more than 30 yr as a sterile density medium for the isolation of high yields of mononuclear cells from bone marrow, peripheral blood, and cord blood. All Ficoll-Paque PREMIUM products differ from Ficoll-Paque PLUS in that they are manufactured under a Quality Management System certified to ISO 13485:2003.ApplicationOptimized for the isolation of mononuclear cells from human peripheral blood, bone marrow, and umbilical cord blood.
Can be used for isolating a broad range of human mononuclear cells including those of a higher density and for separating blood cells from mice or rats.
Can be used when isolating lower-density human mononuclear cells (e.g., mesenchymal stromal cells or monocytes).Features and Benefits- Sterile, ready to use reagents used to prepare mononuclear cell preparations from peripheral blood, bone marrow, and umbilical cord blood by density gradient centrifugation.
- Manufactured under a Quality Management System certified to ISO 13485:2003.
- Low levels of endotoxin (< 0.12 EU/mL) secured and tested.
- Cytotoxicity grade 0.
- A Regulatory Support File (RSF) is available for Ficoll-Paque PREMIUM products.
Storage and StabilityStore at 4 to 30 °C ()Legal InformationFicoll is a registered trademark of CytivaПараметрыform liquid shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 6 x 500 mL Торговая марка Cytiva color Colorless to slightly yellow pH range 5.5 - 7.5
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Ficoll®-Paque Premium GE17-5442-02
NACRES: NA.25 General descriptionFicoll-Paque PREMIUM products are a range of sterile, ready-to-use density gradient media for the preparation of mononuclear cells.
Ficoll-Paque PREMIUM products are based on Ficoll-Paque PLUS (see Ficoll-Paque PLUS) which has been used for more than 30 yr as a sterile density medium for the isolation of high yields of mononuclear cells from bone marrow, peripheral blood, and cord blood. All Ficoll-Paque PREMIUM products differ from Ficoll-Paque PLUS in that they are manufactured under a Quality Management System certified to ISO 13485:2003.ApplicationOptimized for the isolation of mononuclear cells from human peripheral blood, bone marrow, and umbilical cord blood.
Can be used for isolating a broad range of human mononuclear cells including those of a higher density and for separating blood cells from mice or rats.
Can be used when isolating lower-density human mononuclear cells (e.g., mesenchymal stromal cells or monocytes).Features and Benefits- Sterile, ready to use reagents used to prepare mononuclear cell preparations from peripheral blood, bone marrow, and umbilical cord blood by density gradient centrifugation.
- Manufactured under a Quality Management System certified to ISO 13485:2003.
- Low levels of endotoxin (< 0.12 EU/mL) secured and tested.
- Cytotoxicity grade 0.
- A Regulatory Support File (RSF) is available for Ficoll-Paque PREMIUM products.
Storage and StabilityStore at 4 to 30 °C ()Legal InformationFicoll is a registered trademark of CytivaПараметрыform liquid shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 6 x 100 mL Торговая марка Cytiva color Colorless to slightly yellow pH range 5.5 - 7.5 Узнать цену -
Ficoll®-Paque PREMIUM 1.073 GE17-5446-52
NACRES: NA.25 General descriptionFicoll-Paque PREMIUM products are a range of sterile, ready-to-use density gradient media for the preparation of mononuclear cells for use in cell therapy applications.ApplicationFicoll-Paque PREMIUM products are based on Ficoll-Paque PLUS, which has been used for more than 30 years as a sterile density medium for the isolation of high yields of mononuclear cells from bone marrow, peripheral blood, and cord blood. All Ficoll-Paque PREMIUM products differ from Ficoll-Paque PLUS in that they are manufactured under a Quality Management System certified to ISO 13485:2003.Features and Benefits- Sterile, ready to use reagents used to prepare mononuclear cell preparations from peripheral blood, bone marrow, and umbilical cord blood by density gradient centrifugation.
- Manufactured under a Quality Management System certified to ISO 13485:2003.
- Low levels of endotoxin (< 0.12 EU/mL) secured and tested.
- Cytotoxicity grade 0.
- A Regulatory Support File (RSF) is available for Ficoll-Paque PREMIUM products.
Storage and StabilityStore at 4 to 30 °C ()Legal InformationFicoll is a registered trademark of CytivaПараметрыform liquid shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 6 x 100 mL Торговая марка Cytiva color Colorless to slightly yellow pH range 5.5 - 7.5
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Ficoll®-Paque PREMIUM 1.084 GE17-5446-02
NACRES: NA.25 General descriptionFicoll-Paque PREMIUM products are a range of sterile, ready-to-use density gradient media for the preparation of mononuclear cells.
Ficoll-Paque PREMIUM products are based on Ficoll-Paque PLUS (see Ficoll-Paque PLUS) which has been used for more than 30 yr as a sterile density medium for the isolation of high yields of mononuclear cells from bone marrow, peripheral blood, and cord blood. All Ficoll-Paque PREMIUM products differ from Ficoll-Paque PLUS in that they are manufactured under a Quality Management System certified to ISO 13485:2003.ApplicationOptimized for the isolation of mononuclear cells from human peripheral blood, bone marrow, and umbilical cord blood.
Can be used for isolating a broad range of human mononuclear cells including those of a higher density and for separating blood cells from mice or rats.
Can be used when isolating lower-density human mononuclear cells (e.g., mesenchymal stromal cells or monocytes).Features and Benefits- Sterile, ready to use reagents used to prepare mononuclear cell preparations from peripheral blood, bone marrow, and umbilical cord blood by density gradient centrifugation.
- Manufactured under a Quality Management System certified to ISO 13485:2003.
- Low levels of endotoxin (< 0.12 EU/mL) secured and tested.
- Cytotoxicity grade 0.
- A Regulatory Support File (RSF) is available for Ficoll-Paque PREMIUM products.
Storage and StabilityStore at 4 to 30 °C ()Legal InformationFicoll is a registered trademark of CytivaПараметрыform liquid shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 6 x 100 mL Торговая марка Cytiva color Colorless to slightly yellow pH range 5.5 - 7.5
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Cytodex® 1 Gamma Microcarriers GE17548702
General descriptionMicrocarrier for general use in sterilized dry powder form.- Gamma-sterilized and ready to use for quick culture start-up.
- Delivered in a convenient, single-use container system for easy transfer to various cell culture vessels.
- Supplied dry to save storage space and facilitate transportation.
- Enable culturing of anchorage-dependent cells in single-use bioreactor to eliminate the need for cleaning and cleaning validation.
- Supported by extensive product documentation to facilitate regulatory filing.
- Serum-free function testing to ensure performance
A general-purpose microcarrier
Sterilized Cytodex 1 Gamma is a general-purpose microcarrier particularly suitable for most established cell lines and for production of viruses or cell products from cultures of primary cells and normal diploid cell strains.Legal InformationCytodex is a registered trademark of CytivaПараметрыsterility sterile feature dry powder packaging pkg of 300 g Торговая марка 17548702, Cytiva
Safety InformationWGK Germany WGK 1 Узнать цену -
Cytodex® 1 Gamma Microcarriers GE17548701
General descriptionMicrocarrier for general use in sterilized dry powder form.- Gamma-sterilized and ready to use for quick culture start-up.
- Delivered in a convenient, single-use container system for easy transfer to various cell culture vessels.
- Supplied dry to save storage space and facilitate transportation.
- Enable culturing of anchorage-dependent cells in single-use bioreactor to eliminate the need for cleaning and cleaning validation.
- Supported by extensive product documentation to facilitate regulatory filing.
- Serum-free function testing to ensure performance
A general-purpose microcarrier
Sterilized Cytodex 1 Gamma is a general-purpose microcarrier particularly suitable for most established cell lines and for production of viruses or cell products from cultures of primary cells and normal diploid cell strains.Legal InformationCytodex is a registered trademark of CytivaПараметрыsterility sterile feature dry powder packaging pkg of 30 g Торговая марка 17548701, Cytiva
Safety InformationWGK Germany WGK 1 Узнать цену -
Cytodex® 1 microcarrier beads GE17-0448-03
CAS Number: 79920-52-8 MDL number: MFCD00130900 Preparation NotePrior to use, swell beads in PBS (50 mL/g) and autoclave at 120 °C.Legal InformationCytodex is a registered trademark of CytivaПараметрыmaterial dextran beads sterility non-sterile packaging pkg of 500 g Торговая марка 17-0448-03, Cytiva
Safety InformationWGK Germany WGK 1 Узнать цену -
Cytodex® 1 microcarrier beads GE17-0448-01
CAS Number: 79920-52-8 MDL number: MFCD00130900 Preparation NotePrior to use, swell beads in PBS (50 mL/g) and autoclave at 120 °C.Legal InformationCytodex is a registered trademark of CytivaПараметрыmaterial dextran beads sterility non-sterile packaging pkg of 25 g Торговая марка 17-0448-01, Cytiva
Safety InformationWGK Germany WGK 1 Узнать цену -
Cytodex® 3 microcarrier beads GE17-0485-03
CAS Number: 88895-19-6 MDL number: MFCD00130902 Preparation NotePrior to use, swell beads in PBS (50 mL/g) and autoclave at 120°C.Legal InformationCytodex is a registered trademark of CytivaПараметрыmaterial dextran beads sterility non-sterile packaging pkg of 500 g Торговая марка 17-0485-03, Cytiva Узнать цену -
Cytodex® 3 microcarrier beads GE17-0485-02
CAS Number: 88895-19-6 MDL number: MFCD00130902 Preparation NotePrior to use, swell beads in PBS (50 mL/g) and autoclave at 120°C.Legal InformationCytodex is a registered trademark of CytivaПараметрыmaterial dextran beads sterility non-sterile packaging pkg of 100 g Торговая марка 17-0485-02, Cytiva
Safety InformationWGK Germany WGK 1 Узнать цену -
E. coli BL21 GE27-1542-01
NACRES: NA.25 General descriptionIt is an exemplary host for the expression of recombinant proteins. As an E. coli B strain, it further lacks the major protease, encoded by the lon gene, catalyzing the endoproteolytic cleavage of damaged and recombinant proteins in the cell.Параметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 1 vial Торговая марка Cytiva shipped in dry ice storage temp. −20°C
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Ficoll® PM 400 GE17-0300-50
NACRES: NA.25 General descriptionHigh molecular weight sucrose-polymers formed by copolymerization of sucrose with epichlorohydrin. The molecules are highly branched and the high content of hydroxyl groups leads to very good solubility in aqueous media.
Ficoll® PM400 is a synthetic neutral, highly-branched hydrophilic polymer of sucrose with an average molecular weight of 400 000. It has long been used to form density gradients for separating and isolating eukaryotic cells, organelles and bacterial cells, as a stabilizing agent, and as a preparation medium for isolating mononuclear cells. Applications can also be found in defined culture media, nucleic acid hybridization, electrophoresis, and immunological studies.ApplicationUsed in the formation of density gradients for the separation and isolation of eukaryotic cells, organelles, and bacterial cells, as a stabilizing agent and as a separation medium for the isolation of lymphocytes.
It also has applications in defined culture media, nucleic acid hybridization, electrophoresis, and immunological studies.
Used for gradient centrifugation in all types of centrifuge rotors and for separation at unit gravity.Features and Benefits- For producing density gradients for separation of cells and subcellular components by centrifugation or by sedimentation at unit gravity.
- Neutral, highly branched, hydrophilic polymer of sucrose which dissolves readily in aqueous solution.
- Concentrations of up to 50% (w/v) covering densities of up to 1.2 g/mL can be achieved.
- Better osmotic properties than sucrose.
- Preserves functional and morphological integrity.
- Useful for separating cells that are sensitive to centrifugation and for separating cells of similar density but different size (under conditions of sedimentation at unit gravity).
- Does not penetrate biological membranes.
- Serves as the raw material for preparation of Ficoll-Paque gradients.
- Used in other applications such as electrophoresis, hybridization, cryopreservation, and as a hapten carrier.
Storage and StabilityStore at 4 to 30 °C ()Legal InformationFicoll is a registered trademark of CytivaПараметрыform solid, spray-dried shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 500 g Торговая марка Cytiva color White solubility soluble (It is delivered as a spray-dried powder and is therefore readily soluble in aqueous media when it is added slowly with concomitant stirring. Any lumps formed during this procedure will dissolve fairly quickly. Concentrations up to 50% (w/v) can easily be attained)
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Ficoll® PM 400 GE17-0300-10
NACRES: NA.25 General descriptionHigh molecular weight sucrose-polymers formed by copolymerization of sucrose with epichlorohydrin. The molecules are highly branched and the high content of hydroxyl groups leads to very good solubility in aqueous media.Features and Benefits- For producing density gradients for separation of cells and subcellular components by centrifugation or by sedimentation at unit gravity.
- Neutral, highly branched, hydrophilic polymer of sucrose which dissolves readily in aqueous solution.
- Concentrations of up to 50% (w/v) covering densities of up to 1.2 g/mL can be achieved.
- Better osmotic properties than sucrose.
- Preserves functional and morphological integrity.
- Useful for separating cells that are sensitive to centrifugation and for separating cells of similar density but different size (under conditions of sedimentation at unit gravity).
- Does not penetrate biological membranes.
- Serves as the raw material for preparation of Ficoll-Paque gradients.
- Used in other applications such as electrophoresis, hybridization, cryopreservation, and as a hapten carrier.
Storage and StabilityStore at 4 to 30 °C ()Legal InformationFicoll is a registered trademark of CytivaПараметрыform solid, spray-dried shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 100 g Торговая марка Cytiva color White solubility soluble (It is delivered as a spray-dried powder and is therefore readily soluble in aqueous media when it is added slowly with concomitant stirring. Any lumps formed during this procedure will dissolve fairly quickly. Concentrations up to 50% (w/v) can easily be attained)
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Ficoll® PM 70 GE17-0310-50
NACRES: NA.25 General descriptionHigh molecular weight sucrose-polymers formed by copolymerization of sucrose with epichlorohydrin. The molecules are highly branched and the high content of hydroxyl groups leads to very good solubility in aqueous media.Features and Benefits- Displays minimal toxicity
- Has favorable viscosity and osmotic properties
Storage and StabilityStore at 4 to 30 °C ()Legal InformationFicoll is a registered trademark of CytivaПараметрыform solid, spray-dried shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 500 g Торговая марка Cytiva color White solubility soluble (It is delivered as a spray-dried powder and is therefore readily soluble in aqueous media when it is added slowly with concomitant stirring. Any lumps formed during this procedure will dissolve fairly quickly. Concentrations up to 50% (w/v) can easily be attained)
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Ficoll® PM 70 GE17-0310-10
NACRES: NA.25 General descriptionHigh molecular weight sucrose-polymers formed by copolymerization of sucrose with epichlorohydrin. The molecules are highly branched and the high content of hydroxyl groups leads to very good solubility in aqueous media.
Features and Benefits- Displays minimal toxicity
- Has favorable viscosity and osmotic properties
Storage and Stability
Store at 4 to 30 °C ()
Analysis NoteLegal InformationFicoll is a registered trademark of CytivaПараметрыform solid, spray-dried shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 100 g Торговая марка Cytiva color White solubility soluble (It is delivered as a spray-dried powder and is therefore readily soluble in aqueous media when it is added slowly with concomitant stirring. Any lumps formed during this procedure will dissolve fairly quickly. Concentrations up to 50% (w/v) can easily be attained)
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Ficoll® PM400 GE17-0300-05
NACRES: NA.25 General descriptionHigh molecular weight sucrose-polymers formed by copolymerization of sucrose with epichlorohydrin. The molecules are highly branched and the high content of hydroxyl groups leads to very good solubility in aqueous media.
Ficoll® PM400 is a synthetic neutral, highly-branched hydrophilic polymer of sucrose with an average molecular weight of 400 000. It has long been used to form density gradients for separating and isolating eukaryotic cells, organelles and bacterial cells, as a stabilizing agent, and as a preparation medium for isolating mononuclear cells. Applications can also be found in defined culture media, nucleic acid hybridization, electrophoresis, and immunological studies.ApplicationUsed in the formation of density gradients for the separation and isolation of eukaryotic cells, organelles, and bacterial cells, as a stabilizing agent and as a separation medium for the isolation of lymphocytes.
It also has applications in defined culture media, nucleic acid hybridization, electrophoresis, and immunological studies.
Used for gradient centrifugation in all types of centrifuge rotors and for separation at unit gravity.Features and Benefits- For producing density gradients for separation of cells and subcellular components by centrifugation or by sedimentation at unit gravity.
- Neutral, highly branched, hydrophilic polymer of sucrose which dissolves readily in aqueous solution.
- Concentrations of up to 50% (w/v) covering densities of up to 1.2 g/mL can be achieved.
- Better osmotic properties than sucrose.
- Preserves functional and morphological integrity.
- Useful for separating cells that are sensitive to centrifugation and for separating cells of similar density but different size (under conditions of sedimentation at unit gravity).
- Does not penetrate biological membranes.
- Serves as the raw material for preparation of Ficoll-Paque gradients.
- Used in other applications such as electrophoresis, hybridization, cryopreservation, and as a hapten carrier.
Storage and StabilityStore at 4 to 30 °C ()Legal InformationFicoll is a registered trademark of CytivaПараметрыform solid, spray-dried shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 5 kg Торговая марка Cytiva color White solubility soluble (It is delivered as a spray-dried powder and is therefore readily soluble in aqueous media when it is added slowly with concomitant stirring. Any lumps formed during this procedure will dissolve fairly quickly. Concentrations up to 50% (w/v) can easily be attained)
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Percoll® PLUS GE17-5445-01
NACRES: NA.75 General descriptionPercoll® PLUS is a silica-based colloidal medium for cell separation by density gradient centrifugation. The silica particles of the medium are covalently coated with silane, providing product stability and long shelf life. The silane coating also provides low osmolality and toxicity, as well as low viscosity. Percoll PLUS is aseptically filled and has low levels of endotoxins, making it well-suited for cell separation in clinical research applications.
Cell separation with the medium is performed under gentle conditions, facilitating the isolation of a variety of cells, subcellular particles, and viruses where preservation of viability and morphological integrity is important. The low toxicity of Percoll PLUS ensures that removal of the medium from separated cellular particles is not usually necessary.
After adjustment, Percoll PLUS forms iso-osmotic gradients within the density range of 1.0 to 1.3 g/ml. This density range is especially useful since most cells, subcellular particles, and viruses have a buoyant density of 1.0 to 1.2 g/ml in Percoll PLUS.ApplicationPercoll PLUS can be used in density centrifugation applications for the isolation and purification of cells, subcellular particles, and viruses down to ~70S. The medium offers both high resolution and biological compatibility. The low intrinsic osmolality and viscosity are particularly useful when isolating organelles where maintenance of membrane integrity is important. Percoll PLUS can be used to produce preformed, continuous or discontinuous gradients. Under moderate centrifugal force, the colloidal particles that comprise Percoll PLUS sediment to form smooth, continuous density gradients. This property can be exploited in either fixed-angle or vertical rotors.
The medium is also suited to applications where high-speed centrifugation is required. In this case, the sample can be premixed with the medium and subsequently separated on the continuous gradient formed in situ. Thus, gradient
formation and sample separation can be achieved in one step.
All experiments described in the literature using Percoll® can also be performed with Percoll PLUS.Features and BenefitsPercoll® PLUS offers:- Low endotoxin levels (max. 2 EU/ml)
- Absence of toxicity for cells and very low chemical reactivity
- Low osmolality: Percoll PLUS can easily be adjusted with physiological saline, other balanced salt solutions, or cell culture media, to give gradients that are iso-osmotic throughout
- Low viscosity resulting in rapid formation of gradients and particle separation at low centrifugal forces
Storage and StabilityStore at 4 to 30 °C ()Legal InformationPercoll is a registered trademark of CytivaПараметрыsterility non-sterile (LOW ENDOTOXIN (2 EU/ml)) form colloidal (Colloidal solution of silica particles coated with silane), liquid (Suspension), solution shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 1 L Торговая марка Cytiva color Colorless to slightly yellow pH range 8.9 - 9.9
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Percoll® PLUS GE17-5445-02
NACRES: NA.75 General descriptionPercoll® PLUS is a silica-based colloidal medium for cell separation by density gradient centrifugation. The silica particles of the medium are covalently coated with silane, providing product stability and long shelf life. The silane coating also provides low osmolality and toxicity, as well as low viscosity. Percoll PLUS is aseptically filled and has low levels of endotoxins, making it well-suited for cell separation in clinical research applications.
Cell separation with the medium is performed under gentle conditions, facilitating the isolation of a variety of cells, subcellular particles, and viruses where preservation of viability and morphological integrity is important. The low toxicity of Percoll PLUS ensures that removal of the medium from separated cellular particles is not usually necessary.
After adjustment, Percoll PLUS forms iso-osmotic gradients within the density range of 1.0 to 1.3 g/ml. This density range is especially useful since most cells, subcellular particles, and viruses have a buoyant density of 1.0 to 1.2 g/ml in Percoll PLUS.ApplicationPercoll PLUS can be used in density centrifugation applications for the isolation and purification of cells, subcellular particles, and viruses down to ~70S. The medium offers both high resolution and biological compatibility. The low intrinsic osmolality and viscosity are particularly useful when isolating organelles where maintenance of membrane integrity is important. Percoll PLUS can be used to produce preformed, continuous or discontinuous gradients. Under moderate centrifugal force, the colloidal particles that comprise Percoll PLUS sediment to form smooth, continuous density gradients. This property can be exploited in either fixed-angle or vertical rotors.
The medium is also suited to applications where high-speed centrifugation is required. In this case, the sample can be premixed with the medium and subsequently separated on the continuous gradient formed in situ. Thus, gradient
formation and sample separation can be achieved in one step.
All experiments described in the literature using Percoll® can also be performed with Percoll PLUS.Features and BenefitsPercoll® PLUS offers:- Low endotoxin levels (max. 2 EU/ml)
- Absence of toxicity for cells and very low chemical reactivity
- Low osmolality: Percoll PLUS can easily be adjusted with physiological saline, other balanced salt solutions, or cell culture media, to give gradients that are iso-osmotic throughout
- Low viscosity resulting in rapid formation of gradients and particle separation at low centrifugal forces
Storage and StabilityStore at 4 to 30 °C ()Legal InformationPercoll is a registered trademark of CytivaПараметрыsterility non-sterile (LOW ENDOTOXIN (2 EU/ml)) form colloidal (Colloidal solution of silica particles coated with silane), liquid (Suspension), solution shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 250 mL Торговая марка Cytiva color Colorless to slightly yellow pH range 8.9 - 9.9
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
pGEX-2T 25 g Wi/Di GE28-9546-53
NACRES: NA.56 General descriptionSimplified package with only the pGEX vector in the pack (E. coli BL21 will continue to be available separately, code no 27-1542-01. Updated Product Specification sheets.ApplicationThirteen pGEX vectors are available (see Figure). Nine of the vectors have an expanded multiple cloning site (MCS) that contains six restriction sites. The expanded MCS facilitates the unidirectional cloning of cDNA inserts obtained from libraries constructed using many available lambda vectors. pGEX-6P-1, pGEX-6P-2, and pGEX-6P-3 each encode the recognition sequence for site-specific cleavage by PreScission™ Protease, (see PreScission™ Protease) between the GST domain and the multiple cloning site. pGEX-4T-1, pGEX-4T-2, and pGEX-4T-3 are derived from pGEX-2T and contain a Thrombin recognition site. pGEX-5X-1, pGEX-5X-2, and pGEX5X-3 are derivatives of pGEX-3X and possess a Factor Xa recognition site.
pGEX-2TK is designed to allow the detection of expressed Proteins by directly labeling the fusion products in vitro (1). This vector contains the recognition sequence for the catalytic subunit of cAMP-dependent Protein kinase obtained from heart muscle. The Protein kinase site is located between the GST domain and the MCS. Expressed Proteins can be directly labeled using Protein kinase and [gamma-32P]ATP and readily detected using standard radiometric or autoradiographic techniques. pGEX-2TK is a derivative of pGEX-2T; its fusion Proteins can be cleaved with Thrombin.
Cleavage of pGEX-6P GST fusion Proteins occurs between the Gln and Gly residues of the recognition sequence Leu-Glu-Val-Leu-Phe-Gln-Gly-Pro (2). Low temperature (5°C) digestion minimizes the degradation of the Protein of interest. Because PreScission™ Protease has been engineered with a GST tag, it can also be removed from the cleavage mixture simultaneously with the GST portion of the fusion Protein. The pGEX-6P Expression Vectors permit convenient site-specific cleavage and simultaneous purification on Glutathione Sepharose. The pGEX-6P series provides all three translational reading frames linked between the GST coding region and the multiple cloning site.
Features and Benefits- A tac promoter for chemically inducible, high-level expression of GST-tagged recombinant Proteins.
- An internal lacIq gene for use in any E. coli host.
- Very mild elution conditions for release of fusion Proteins from the affinity matrix, thus minimizing effects on antigenicity and functional activity.
- PreScission™ Protease, Thrombin, or Factor Xa recognition sites for cleaving the desired Protein from the fusion product.
Analysis NoteLegal InformationpGEX Vectors
pGEX Vectors are to be used for scientific investigation and research and for no other purpose whatsoever and a license for commercial use of the licensed products and the processes claimed in US patent 5,654,176 and equivalent patents and patent applications in other countries must be negotiated directly with Millipore Corp (formerly Chemicon International Inc) by the purchaser prior to such use.
PreScission is a trademark of CytivaПараметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pkg of 25 μg Торговая марка Cytiva shipped in dry ice storage temp. −20°C
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
pGEX-4T-1 GE28-9545-49
NACRES: NA.56 General descriptionSimplified package with only the pGEX vector in the pack (E. coli BL21 will continue to be available separately, code no 27-1542-01. Updated Product Specification sheets.ApplicationThirteen pGEX vectors are available (see Figure). Nine of the vectors have an expanded multiple cloning site (MCS) that contains six restriction sites. The expanded MCS facilitates the unidirectional cloning of cDNA inserts obtained from libraries constructed using many available lambda vectors. pGEX-6P-1, pGEX-6P-2, and pGEX-6P-3 each encode the recognition sequence for site-specific cleavage by PreScission™ Protease, (see PreScission™ Protease) between the GST domain and the multiple cloning site. pGEX-4T-1, pGEX-4T-2, and pGEX-4T-3 are derived from pGEX-2T and contain a Thrombin recognition site. pGEX-5X-1, pGEX-5X-2, and pGEX5X-3 are derivatives of pGEX-3X and possess a Factor Xa recognition site.
pGEX-2TK is designed to allow the detection of expressed Proteins by directly labeling the fusion products in vitro (1). This vector contains the recognition sequence for the catalytic subunit of cAMP-dependent Protein kinase obtained from heart muscle. The Protein kinase site is located between the GST domain and the MCS. Expressed Proteins can be directly labeled using Protein kinase and [gamma-32P]ATP and readily detected using standard radiometric or autoradiographic techniques. pGEX-2TK is a derivative of pGEX-2T; its fusion Proteins can be cleaved with Thrombin.
Cleavage of pGEX-6P GST fusion Proteins occurs between the Gln and Gly residues of the recognition sequence Leu-Glu-Val-Leu-Phe-Gln-Gly-Pro (2). Low temperature (5°C) digestion minimizes the degradation of the Protein of interest. Because PreScission™ Protease has been engineered with a GST tag, it can also be removed from the cleavage mixture simultaneously with the GST portion of the fusion Protein. The pGEX-6P Expression Vectors permit convenient site-specific cleavage and simultaneous purification on Glutathione Sepharose. The pGEX-6P series provides all three translational reading frames linked between the GST coding region and the multiple cloning site.Features and Benefits- A tac promoter for chemically inducible, high-level expression of GST-tagged recombinant Proteins.
- An internal lacIq gene for use in any E. coli host.
- Very mild elution conditions for release of fusion Proteins from the affinity matrix, thus minimizing effects on antigenicity and functional activity.
- PreScission™ Protease, Thrombin, or Factor Xa recognition sites for cleaving the desired Protein from the fusion product.
Legal InformationpGEX Vectors
pGEX Vectors are to be used for scientific investigation and research and for no other purpose whatsoever and a license for commercial use of the licensed products and the processes claimed in US patent 5,654,176 and equivalent patents and patent applications in other countries must be negotiated directly with Millipore Corp (formerly Chemicon International Inc) by the purchaser prior to such use.
PreScission is a trademark of CytivaПараметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pkg of 25 μg Торговая марка Cytiva shipped in dry ice storage temp. −20°C
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
pGEX-4T-3 GE28-9545-52
NACRES: NA.56 Legal InformationpGEX Vectors
pGEX Vectors are to be used for scientific investigation and research and for no other purpose whatsoever and a license for commercial use of the licensed products and the processes claimed in US patent 5,654,176 and equivalent patents and patent applications in other countries must be negotiated directly with Millipore Corp (formerly Chemicon International Inc) by the purchaser prior to such use.Параметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pkg of 25 μg Торговая марка Cytiva shipped in dry ice storage temp. −20°C Узнать цену -
pGEX-6P-1 Vector GE28-9546-48
NACRES: NA.56 Legal InformationpGEX Vectors
pGEX Vectors are to be used for scientific investigation and research and for no other purpose whatsoever and a license for commercial use of the licensed products and the processes claimed in US patent 5,654,176 and equivalent patents and patent applications in other countries must be negotiated directly with Millipore Corp (formerly Chemicon International Inc) by the purchaser prior to such use.Параметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pkg of 25 μg Торговая марка Cytiva shipped in dry ice storage temp. −20°C
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
pGEX-6P-2 Vector GE28-9546-50
NACRES: NA.56 General descriptionSimplified package with only the pGEX vector in the pack (E. coli BL21 will continue to be available separately, code no 27-1542-01. Updated Product Specification sheets.ApplicationThirteen pGEX vectors are available (see Figure). Nine of the vectors have an expanded multiple cloning site (MCS) that contains six restriction sites. The expanded MCS facilitates the unidirectional cloning of cDNA inserts obtained from libraries constructed using many available lambda vectors. pGEX-6P-1, pGEX-6P-2, and pGEX-6P-3 each encode the recognition sequence for site-specific cleavage by PreScission™ Protease, (see PreScission™ Protease) between the GST domain and the multiple cloning site. pGEX-4T-1, pGEX-4T-2, and pGEX-4T-3 are derived from pGEX-2T and contain a Thrombin recognition site. pGEX-5X-1, pGEX-5X-2, and pGEX5X-3 are derivatives of pGEX-3X and possess a Factor Xa recognition site.
pGEX-2TK is designed to allow the detection of expressed Proteins by directly labeling the fusion products in vitro (1). This vector contains the recognition sequence for the catalytic subunit of cAMP-dependent Protein kinase obtained from heart muscle. The Protein kinase site is located between the GST domain and the MCS. Expressed Proteins can be directly labeled using Protein kinase and [gamma-32P]ATP and readily detected using standard radiometric or autoradiographic techniques. pGEX-2TK is a derivative of pGEX-2T; its fusion Proteins can be cleaved with Thrombin.
Cleavage of pGEX-6P GST fusion Proteins occurs between the Gln and Gly residues of the recognition sequence Leu-Glu-Val-Leu-Phe-Gln-Gly-Pro (2). Low temperature (5°C) digestion minimizes the degradation of the Protein of interest. Because PreScission™ Protease has been engineered with a GST tag, it can also be removed from the cleavage mixture simultaneously with the GST portion of the fusion Protein. The pGEX-6P Expression Vectors permit convenient site-specific cleavage and simultaneous purification on Glutathione Sepharose. The pGEX-6P series provides all three translational reading frames linked between the GST coding region and the multiple cloning site.Features and Benefits- A tac promoter for chemically inducible, high-level expression of GST-tagged recombinant Proteins.
- An internal lacIq gene for use in any E. coli host.
- Very mild elution conditions for release of fusion Proteins from the affinity matrix, thus minimizing effects on antigenicity and functional activity.
- PreScission™ Protease, Thrombin, or Factor Xa recognition sites for cleaving the desired Protein from the fusion product.
Legal InformationpGEX Vectors
pGEX Vectors are to be used for scientific investigation and research and for no other purpose whatsoever and a license for commercial use of the licensed products and the processes claimed in US patent 5,654,176 and equivalent patents and patent applications in other countries must be negotiated directly with Millipore Corp (formerly Chemicon International Inc) by the purchaser prior to such use.
PreScission is a trademark of CytivaПараметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pkg of 25 μg Торговая марка Cytiva shipped in dry ice storage temp. −20°C Узнать цену -
pGEX-6P-3 Vector GE28-9546-51
NACRES: NA.56 General descriptionSimplified package with only the pGEX vector in the pack (E. coli BL21 will continue to be available separately, code no 27-1542-01. Updated Product Specification sheets.ApplicationThirteen pGEX vectors are available (see Figure). Nine of the vectors have an expanded multiple cloning site (MCS) that contains six restriction sites. The expanded MCS facilitates the unidirectional cloning of cDNA inserts obtained from libraries constructed using many available lambda vectors. pGEX-6P-1, pGEX-6P-2, and pGEX-6P-3 each encode the recognition sequence for site-specific cleavage by PreScission™ Protease, (see PreScission™ Protease) between the GST domain and the multiple cloning site. pGEX-4T-1, pGEX-4T-2, and pGEX-4T-3 are derived from pGEX-2T and contain a Thrombin recognition site. pGEX-5X-1, pGEX-5X-2, and pGEX5X-3 are derivatives of pGEX-3X and possess a Factor Xa recognition site.
pGEX-2TK is designed to allow the detection of expressed Proteins by directly labeling the fusion products in vitro (1). This vector contains the recognition sequence for the catalytic subunit of cAMP-dependent Protein kinase obtained from heart muscle. The Protein kinase site is located between the GST domain and the MCS. Expressed Proteins can be directly labeled using Protein kinase and [gamma-32P]ATP and readily detected using standard radiometric or autoradiographic techniques. pGEX-2TK is a derivative of pGEX-2T; its fusion Proteins can be cleaved with Thrombin.
Cleavage of pGEX-6P GST fusion Proteins occurs between the Gln and Gly residues of the recognition sequence Leu-Glu-Val-Leu-Phe-Gln-Gly-Pro (2). Low temperature (5°C) digestion minimizes the degradation of the Protein of interest. Because PreScission™ Protease has been engineered with a GST tag, it can also be removed from the cleavage mixture simultaneously with the GST portion of the fusion Protein. The pGEX-6P Expression Vectors permit convenient site-specific cleavage and simultaneous purification on Glutathione Sepharose. The pGEX-6P series provides all three translational reading frames linked between the GST coding region and the multiple cloning site.
Features and Benefits- A tac promoter for chemically inducible, high-level expression of GST-tagged recombinant Proteins.
- An internal lacIq gene for use in any E. coli host.
- Very mild elution conditions for release of fusion Proteins from the affinity matrix, thus minimizing effects on antigenicity and functional activity.
- PreScission™ Protease, Thrombin, or Factor Xa recognition sites for cleaving the desired Protein from the fusion product.
Analysis NoteLegal InformationpGEX Vectors
pGEX Vectors are to be used for scientific investigation and research and for no other purpose whatsoever and a license for commercial use of the licensed products and the processes claimed in US patent 5,654,176 and equivalent patents and patent applications in other countries must be negotiated directly with Millipore Corp (formerly Chemicon International Inc) by the purchaser prior to such use.
PreScission is a trademark of CytivaПараметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pkg of 25 μg Торговая марка Cytiva shipped in dry ice storage temp. −20°C Узнать цену -
CHAPS GE17-1314-01
NACRES: NA.25 ApplicationA nonionic or zwitterionic detergent is included in the sample solution to ensure complete sample solubilization and to prevent aggregation through hydrophobic interactions. CHAPS and Triton X-100 are detergents commonly used in IEF.Параметрыsterility non-sterile form solid shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. feature wetted part: no packaging pack of 1 g Торговая марка Cytiva color White solubility cold water: soluble (Partially soluble in cold and hot water) storage temp. 2-8°C
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
DIGE Buffer Kit GE28-9374-52
NACRES: NA.25 Параметрыsterility non-sterile form liquid shelf life Please be aware this product may be shipped 30 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 1 kit Торговая марка Cytiva storage temp. 2-8°C
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Pharmalyte® 5 - 8 GE17-0453-01
NACRES: NA.25 General descriptionPharmalyte® carrier ampholytes, prepared by the co-polymerization of glycine, glycylglycine, amines, and epichlorohydrin, are available in five broad-range and four narrow-range pH intervals. Each interval contains numerous ampholytes with a high buffering capacity per pH unit. Pharmalyte® carrier ampholytes form an extremely stable linear pH gradient and exhibit even conductivity across the gel. For precast PhastGel® gels for PhastSystem, see PhastGel.ApplicationCan be used directly for agarose, Ultrodex or polyacrylamide gels and form linear gradients.Legal InformationPharmalyte is a registered trademark of Cytiva
PhastGel is a registered trademark of CytivaПараметрыsterility non-sterile form liquid shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. feature wetted part: no packaging pkg of 25 mL Торговая марка Cytiva storage condition (S-re at 2°C - 8°C.) color Colorless to light yellow solubility cold water: soluble (Soluble in cold water and hot water) storage temp. 2-8°C
Safety Informationsignalword Danger hcodes H225 - H272 - H300 - H350 - H400 pcodes P201 - P210 - P220 - P235 - P241 - P273 - P280 - P301 + P310 - P303 + P361 + P353 - P501 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Pharmalyte® 8 - 10.5 GE17-0455-01
NACRES: NA.25 General descriptionPharmalyte® carrier ampholytes, prepared by the co-polymerization of glycine, glycylglycine, amines, and epichlorohydrin, are available in five broad-range and four narrow-range pH intervals. Each interval contains numerous ampholytes with a high buffering capacity per pH unit. Pharmalyte® carrier ampholytes form an extremely stable linear pH gradient and exhibit even conductivity across the gel. For precast PhastGel® gels for PhastSystem, see PhastGel.ApplicationCan be used directly for agarose, Ultrodex or polyacrylamide gels and form linear gradients.Legal InformationPharmalyte is a registered trademark of Cytiva
PhastGel is a registered trademark of CytivaПараметрыsterility non-sterile form liquid shelf life ~5 yr, Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. feature wetted part: no packaging pkg of 25 mL Торговая марка Cytiva storage condition (S-re at 2°C - 8°C.) color colorless to light yellow, Colorless to light yellow solubility cold water: soluble (Soluble in cold water and hot water) storage temp. 2-8°C
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Rapid-hyb Buffer GERPN1636
NACRES: NA.25 General descriptionA major limitation of membrane hybridization is speed. At commonly used probe concentrations (2 to 10 ng/mL), hybridization normally takes 16 h to detect single-copy gene sequences in mammalian DNA. Use of Rapid-hyb Buffer reduces this time to 2 h using similar probe concentrations.ApplicationRapid-hyb Buffer has been to pre-hybridize membranes for Northern blotting.Параметрыsterility non-sterile shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 500 mL Торговая марка Cytiva RPN1636 storage condition room temperature (Under these conditions the product is stable for at least 3 months)
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Vivaspin 6 centrifugal concentrators GE28-9322-93
NACRES: NB.24 Storage and StabilityStore at 4 to 30 °C ()Параметрыmaterial polycarbonate housing, polyethersulfone membrane sterility non-sterile shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. feature wetted part: no packaging pkg of 25 ea Торговая марка Cytiva tube size 15 mL working volume 6 mL pore size 3 kDa MWCO Узнать цену -
Vivaspin® 2, 10 kDa MWCO Polyethersulfone GE28-9322-47
NACRES: NB.24 General descriptionDesigned for fast, nondenaturing concentration of biological samples by membrane ultrafiltration. Up to 30-fold concentration of the sample can be achieved with recovery of the target molecule typically exceeding 95%.
Vivaspin® sample concentrators are designed for fast, nondenaturing concentration of biological samples by membrane ultrafiltration. Up to 30-fold concentration of the sample can be achieved with recovery of the target molecule typically exceeding 95%. The entire process is performed in a single tube with an upper compartment containing sample and lower compartment separated by a semipermeable membrane with a molecular weight cut-off (MWCO) selected by the user. Centrifugation is applied to force solvent through the membrane, leaving a more concentrated sample in the upper chamber.
Vivaspin® sample concentrators cater for sample volumes from 100 µl to 20 ml, with a range of molecular weight cutoff values from Mr 3 000 to 100 000. For maximum recovery, select a MWCO at least 50% smaller than the molecular size of the species of interestFeatures and Benefits- Compatible pH range is from pH 1 to 9.
- Patented dead-stop technology, which ensures that samples cannot be concentrated to dryness and enables direct concentrate recovery
- One-step sample concentration in a single tube for minimal sample handling and reduced sample loss.
- Vertical polyethersulfone membrane minimizes membrane blockage and tolerates high flow rates.
Legal InformationVivaspin is a registered trademark of Sartorius Stedim Biotech GmbHПараметрыmaterial polycarbonate housing, polyethersulfone membrane sterility non-sterile shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 25 pieces Торговая марка Cytiva availability not available in Japan tube size ~15 mL working volume 2 mL pore size 10 kDa MWCO storage temp. room temp Узнать цену -
Vivaspin® 2, 100 kDa MWCO Polyethersulfone GE28-9322-58
NACRES: NB.24 General descriptionDesigned for fast, nondenaturing concentration of biological samples by membrane ultrafiltration. Up to 30-fold concentration of the sample can be achieved with recovery of the target molecule typically exceeding 95%.
Vivaspin® sample concentrators are designed for fast, nondenaturing concentration of biological samples by membrane ultrafiltration. Up to 30-fold concentration of the sample can be achieved with recovery of the target molecule typically exceeding 95%. The entire process is performed in a single tube with an upper compartment containing sample and lower compartment separated by a semipermeable membrane with a molecular weight cut-off (MWCO) selected by the user. Centrifugation is applied to force solvent through the membrane, leaving a more concentrated sample in the upper chamber.
Vivaspin® sample concentrators cater for sample volumes from 100 µl to 20 ml, with a range of molecular weight cutoff values from Mr 3 000 to 100 000. For maximum recovery, select a MWCO at least 50% smaller than the molecular size of the species of interestFeatures and Benefits- Compatible pH range is from pH 1 to 9.
- Patented dead-stop technology, which ensures that samples cannot be concentrated to dryness and enables direct concentrate recovery
- One-step sample concentration in a single tube for minimal sample handling and reduced sample loss.
- Vertical polyethersulfone membrane minimizes membrane blockage and tolerates high flow rates.
Legal InformationVivaspin is a registered trademark of Sartorius Stedim Biotech GmbHПараметрыmaterial polycarbonate housing, polyethersulfone membrane sterility non-sterile shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 25 pieces Торговая марка Cytiva availability not available in Japan tube size ~15 mL working volume 2 mL pore size 100 kDa MWCO storage temp. room temp Узнать цену -
Vivaspin® 2, 3 kDa MWCO Polyethersulfone GE28-9322-40
NACRES: NB.24 General descriptionDesigned for fast, nondenaturing concentration of biological samples by membrane ultrafiltration. Up to 30-fold concentration of the sample can be achieved with recovery of the target molecule typically exceeding 95%.
Vivaspin® sample concentrators are designed for fast, nondenaturing concentration of biological samples by membrane ultrafiltration. Up to 30-fold concentration of the sample can be achieved with recovery of the target molecule typically exceeding 95%. The entire process is performed in a single tube with an upper compartment containing sample and lower compartment separated by a semipermeable membrane with a molecular weight cut-off (MWCO) selected by the user. Centrifugation is applied to force solvent through the membrane, leaving a more concentrated sample in the upper chamber.
Vivaspin® sample concentrators cater for sample volumes from 100 µl to 20 ml, with a range of molecular weight cutoff values from Mr 3 000 to 100 000. For maximum recovery, select a MWCO at least 50% smaller than the molecular size of the species of interestFeatures and Benefits- Compatible pH range is from pH 1 to 9.
- Patented dead-stop technology, which ensures that samples cannot be concentrated to dryness and enables direct concentrate recovery
- One-step sample concentration in a single tube for minimal sample handling and reduced sample loss.
- Vertical polyethersulfone membrane minimizes membrane blockage and tolerates high flow rates.
Legal InformationVivaspin is a registered trademark of Sartorius Stedim Biotech GmbHПараметрыmaterial polycarbonate housing, polyethersulfone membrane sterility non-sterile shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 25 pieces Торговая марка Cytiva availability not available in Japan tube size ~15 mL working volume 2 mL pore size 3 kDa MWCO storage temp. room temp Узнать цену -
Vivaspin® 2, 30 kDa MWCO Polyethersulfone GE28-9322-48
NACRES: NB.24 General descriptionDesigned for fast, nondenaturing concentration of biological samples by membrane ultrafiltration. Up to 30-fold concentration of the sample can be achieved with recovery of the target molecule typically exceeding 95%.
Vivaspin® sample concentrators are designed for fast, nondenaturing concentration of biological samples by membrane ultrafiltration. Up to 30-fold concentration of the sample can be achieved with recovery of the target molecule typically exceeding 95%. The entire process is performed in a single tube with an upper compartment containing sample and lower compartment separated by a semipermeable membrane with a molecular weight cut-off (MWCO) selected by the user. Centrifugation is applied to force solvent through the membrane, leaving a more concentrated sample in the upper chamber.
Vivaspin® sample concentrators cater for sample volumes from 100 µl to 20 ml, with a range of molecular weight cutoff values from Mr 3 000 to 100 000. For maximum recovery, select a MWCO at least 50% smaller than the molecular size of the species of interestFeatures and Benefits- Compatible pH range is from pH 1 to 9.
- Patented dead-stop technology, which ensures that samples cannot be concentrated to dryness and enables direct concentrate recovery
- One-step sample concentration in a single tube for minimal sample handling and reduced sample loss.
- Vertical polyethersulfone membrane minimizes membrane blockage and tolerates high flow rates.
Legal InformationVivaspin is a registered trademark of Sartorius Stedim Biotech GmbHПараметрыmaterial polycarbonate housing, polyethersulfone membrane sterility non-sterile shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 25 pieces Торговая марка Cytiva availability not available in Japan tube size ~15 mL working volume 2 mL pore size 30 kDa MWCO storage temp. room temp Узнать цену -
Vivaspin® 2, 5 kDa MWCO Polyethersulfone GE28-9322-45
NACRES: NB.24 General descriptionDesigned for fast, nondenaturing concentration of biological samples by membrane ultrafiltration. Up to 30-fold concentration of the sample can be achieved with recovery of the target molecule typically exceeding 95%.
Vivaspin® sample concentrators are designed for fast, nondenaturing concentration of biological samples by membrane ultrafiltration. Up to 30-fold concentration of the sample can be achieved with recovery of the target molecule typically exceeding 95%. The entire process is performed in a single tube with an upper compartment containing sample and lower compartment separated by a semipermeable membrane with a molecular weight cut-off (MWCO) selected by the user. Centrifugation is applied to force solvent through the membrane, leaving a more concentrated sample in the upper chamber.
Vivaspin® sample concentrators cater for sample volumes from 100 µl to 20 ml, with a range of molecular weight cutoff values from Mr 3 000 to 100 000. For maximum recovery, select a MWCO at least 50% smaller than the molecular size of the species of interestFeatures and Benefits- Compatible pH range is from pH 1 to 9.
- Patented dead-stop technology, which ensures that samples cannot be concentrated to dryness and enables direct concentrate recovery
- One-step sample concentration in a single tube for minimal sample handling and reduced sample loss.
- Vertical polyethersulfone membrane minimizes membrane blockage and tolerates high flow rates.
Legal InformationVivaspin is a registered trademark of Sartorius Stedim Biotech GmbHПараметрыmaterial polycarbonate housing, polyethersulfone membrane sterility non-sterile shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 25 pieces Торговая марка Cytiva availability not available in Japan tube size ~15 mL working volume 2 mL pore size 5 kDa MWCO storage temp. room temp Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
