Каталог
Товары в наличии
Производители
Измерительные приборы
Перемешивание и встряхивание
Отбор проб и пробоподготовка
Перегонка, разделение и фильтрование
Нагревание и охлаждение
Дозирование жидкостей
Вакуумная техника
Микроскопы и оптика
Оборудование для очистки воды
Оборудование для очистки, дезинфекции и стерилизации
Анализ продуктов питания, воды и почв
Микробиология и биотехнология
Хроматография: приборы и принадлежности
Расходные материалы для лабораторий
Охрана труда и безопасность в лаборатории
Оборудование для фармацевтических и пищевых производств
Пилотное производство
Приборы для измерения крутящего момента
Лабораторная посуда
Мебель лабораторная
Химреактивы
Тестеры контроля качества фармацевтических препаратов
Sigma-Aldrich
Новинки
Millipore
- Сортировать:
- Вид таблицей
-
Millistak+® HC Pod Depth Filter MC0HC027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodSpecificationsFilter Grade: C0HCPreparation NoteSterilization Method
1 autoclave cycle of 60 min @ 123 CAnalysis NoteGravimetric Extractables: After 24 hour static soak in pure water (Type 1 DI Water) post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 100 L/m2 of media surface areaLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description Perfusion bioreactor fluid feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) gravimetric extractables 39-69 mg/m2 input sample type liquid conductivity 3.64 – 10.5 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 10 liter per ft(100 L/m) of media surface area) filter grade C0HC shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® HC Pod Depth Filter MC0HC054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationPerfusion bioreactor fluidSpecificationsFilter Grade: C0HCPreparation NoteSterilization Method
1 autoclave cycle of 60 min @ 123 CAnalysis NoteGravimetric Extractables: After 24 hour static soak in pure water (Type 1 DI Water) post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 100 L/m2 of media surface areaLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description Perfusion bioreactor fluid feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) gravimetric extractables 39-69 mg/m2 input sample type liquid conductivity 3.64 – 10.5 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 10 liter per ft(100 L/m) of media surface area) filter grade C0HC shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MCE50027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionThe Millistak+® Pod system is ideal for primary and secondary clarification applications for a wide variety of processes from disease-fighting antibodies to vaccines. The proven filtration performance of Millistak+® filter media in the popular Pod format provides greater flexibility and reduced cycle times. The Millistak+® HC series is dedicated to improving productivity by combining two distinct media layers that enhance filter capacity and retention. Multiple filtration stages downstream of the bioreactor are compressed into one efficient step.SpecificationsFilter Grade: CE50Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE50 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE60054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.SpecificationsFilter Grade: DE60Preparation NoteSterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter max. inlet pressure (15 psi), 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE60 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MDE60027H1
eCl@ss: 32031690 NACRES: NB.24 SpecificationsFilter Grade: DE60Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE60 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MCE20027H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: CE20Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE20 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE65027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: DE65
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE65 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MDE75027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: DE75
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE75 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE35054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: DE35
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE35 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MDE55054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: DE55
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE55 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MCE35027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: CE35
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE35 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MCE15054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: CE15
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE15 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE35027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: DE35
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE35 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MCE25027H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: CE25Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE25 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE70027H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: DE70Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE70 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MCE35054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: CE35
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE35 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MCE20054H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: CE20Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE20 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE40027H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: DE40Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE40 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MDE45054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: DE45
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE45 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MCE40027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: CE40
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE40 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE65054H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: DE65Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE65 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MDE25054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: DE25
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE25 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MDE25027H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: DE25Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE25 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MDE45027H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: DE45Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE45 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MCE15027H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: CE15Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE15 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MCE25054H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: CE25Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE25 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE55027H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: DE55Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE55 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MCE45027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: CE45
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE45 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE50054H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: DE50Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE50 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MCE40054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale Pod
Specifications
Filter Grade: CE40
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE40 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MCE30054H1
SpecificationseCl@ss: 32031690 NACRES: NB.24
Filter Grade: CE30Legal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE30 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MCE45054H1
eCl@ss: 32031690 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: CE45
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE45 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MCE50054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: CE50
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE50 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE30027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: DE30
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE30 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MDE30054H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: DE30
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.054 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE30 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Millistak+® Pod Depth Filter MCE30027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: CE30
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade CE30 shipped in ambient Узнать цену -
Millistak+® Pod Depth Filter MDE50027H1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: lab scale PodApplicationFor clarification of serum, plasma, vaccines, cell culture or other fluids.
Specifications
Filter Grade: DE50
Preparation Note
Sterilization Method
1 autoclave cycle of 60 min @ 123 CLegal InformationMILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material cellulose , filter aid (inorganic), glass fiber-reinforced polypropylene description For clarification of serum, plasma, vaccines, cell culture or other fluids. feature hydrophilic Торговая марка Millistak+® parameter 1 bar max. differential pressure (15 psid) at 80 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C H 14 cm (5.3 in.) L 22 cm (8.5 in.) filtration area 0.027 m2 impurities <0.25 EU/mL (LAL test, Aqueous extraction) input sample type liquid conductivity 1.52 – 1.94 µS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 5 liters per ft(50 L/m) of media surface area) filter grade DE50 shipped in ambient
Safety InformationWGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Clarigard® Cartridge Filter D003F3P01
General descriptionClarigard® filters 99.99% retention characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard® filter media provides maximum filtration capacity, and the polypropylene construction offers low extractable levels and broad chemical compatibility.Preparation NoteSterilization: May be autoclaved for 10 cycles of 30 minutes at 126 °C or steam sterilized for 10 cycles of 30 minutes at 126 °C or hot water sanitized at 80 °C maximum for 30 minutes.Analysis NoteGravimetric Extractables: After autoclaving and a 24-hour soak in ASTM® Type 1 reagent grade water at controlled room temperature, meets the USP Oxidizable Substances Test requirements of <10 mg.Other NotesDirections for Use:- Organism Retention: 99.99% retention
- Mode of Action: Filtration (nominal)
- Application: BioProcessing
- Intended Use: Bioborden reduction
- Instructions for Use: Please refer to the Polygard® and Clarigard® Cartidges user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationASTM is a registered trademark of American Society for Testing and Materials
CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polypropylene filter Quality Level 400 feature hydrophilic Торговая марка Clarigard® parameter 4.8 bar max. differential pressure (70 psid) at 20 °C cartridge nominal length x diam. 30 in. (747.5-752.5 mm) x 2.75 in. (70 mm) impurities 0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction) gravimetric extractables 10 mg pore size 0.3 µm nominal pore size, 0.3 µm pore size input sample type liquid cartridge code Code F (Double Open End Flat Gasket) Узнать цену -
Clarigard® Cartridge Filter D005F3P01
General descriptionClarigard® filters 99.99% retention characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard® filter media provides maximum filtration capacity, and the polypropylene construction offers low extractable levels and broad chemical compatibility.Preparation NoteSterilization: May be autoclaved for 10 cycles of 30 minutes at 126 °C or steam sterilized for 10 cycles of 30 minutes at 126 °C or hot water sanitized at 80 °C maximum for 30 minutes.Analysis NoteGravimetric Extractables: After autoclaving and a 24-hour soak in ASTM® Type 1 reagent grade water at controlled room temperature, meets the USP Oxidizable Substances Test requirements of <10 mg.Other NotesDirections for Use:- Organism Retention: 99.99% retention
- Mode of Action: Filtration (nominal)
- Application: BioProcessing
- Intended Use: Bioborden reduction
- Instructions for Use: Please refer to the Polygard® and Clarigard® Cartidges user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationASTM is a registered trademark of American Society for Testing and Materials
CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polypropylene filter Quality Level 400 feature hydrophilic Торговая марка Clarigard® parameter 4.8 bar max. differential pressure (70 psid) at 20 °C cartridge nominal length x diam. 30 in. (747.5-752.5 mm) x 2.75 in. (70 mm) impurities 0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction) gravimetric extractables 10 mg pore size 0.5 µm nominal pore size, 0.5 µm pore size input sample type liquid cartridge code Code F (Double Open End Flat Gasket) Узнать цену -
Clarigard® Small Scale Capsule Filter D003N11HH1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: CapsuleOther NotesDirections for Use- Organism Retention: 99.9% retention
- Mode of Action: Filtering (nominal)
- Application: BioProcessing
- Intended Use: Bioburden reduction
- Instructions for Use: Please refer to the Polygard® and Clarigard® Cartridge user guides.
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationCLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 300 material polypropylene , polypropylene housing, polypropylene seal, polypropylene vent cap feature hydrophilic Торговая марка Clarigard® application(s) cell analysis: suitable (cell harvesting), cell culture | stem cell: suitable, sample preparation: suitable (clarification of water, buffers or aqueous solutions) L 11.8 cm (4.6 in.) O.D. 8.8 cm (3.5 in.) cartridge nominal length 4.6 in. (11.8 cm) pore size 0.3 µm nominal pore size, 0.3 µm pore size input sample type bottled water
sample type soft drink
sample type food(s)
sample type beer
sample type beverage(s)
sample type liquid
sample type winefitting 1/4 in. inlet/outlet hose barb Featured Industry Industrial QC (product testing) shipped in ambient Узнать цену -
Clarigard® Small Scale Capsule Filter D010N11HH1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: CapsuleOther NotesDirections for Use- Organism Retention: 99.9% retention
- Mode of Action: Filtering (nominal)
- Application: BioProcessing
- Intended Use: Bioburden reduction
- Instructions for Use: Please refer to the Polygard® and Clarigard® Cartridge user guides.
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationCLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 300 material polypropylene , polypropylene housing, polypropylene seal, polypropylene vent cap feature hydrophilic Торговая марка Clarigard® application(s) cell analysis: suitable (cell harvesting), cell culture | stem cell: suitable, sample preparation: suitable (clarification of water, buffers or aqueous solutions) L 11.8 cm (4.6 in.) O.D. 8.8 cm (3.5 in.) cartridge nominal length 4.6 in. (11.8 cm) pore size 1.0 µm nominal pore size, 1.0 µm pore size input sample type beverage(s)
sample type wine
sample type bottled water
sample type soft drink
sample type beer
sample type liquid
sample type food(s)fitting 1/4 in. inlet/outlet hose barb Featured Industry Industrial QC (product testing) shipped in ambient Узнать цену -
Polygard® CR Small Scale Capsule Filter CR03N11HH1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: CapsuleLegal InformationPOLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Polygard is a trademark of Uniroyal Chemical Co.ПараметрыQuality Level 300 material polypropylene , polypropylene housing, polypropylene seal, polypropylene vent cap feature hydrophilic Торговая марка Polygard application(s) cell analysis: suitable (cell harvesting), cell culture | stem cell: suitable, sample preparation: suitable (clarification of water, buffers or aqueous solutions) L 11.8 cm (4.6 in.) O.D. 8.8 cm (3.5 in.) cartridge nominal length 4.6 in. (11.8 cm) pore size 3.0 µm nominal pore size, 3.0 µm pore size input sample type beverage(s)
sample type beer
sample type bottled water
sample type liquid
sample type wine
sample type soft drink
sample type food(s)fitting 1/4 in. inlet/outlet hose barb Featured Industry Industrial QC (product testing) shipped in ambient Узнать цену -
Polygard® CR Small Scale Capsule Filter CR01N11HH1
eCl@ss: 32031690 NACRES: NB.24 Legal InformationPOLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Polygard is a trademark of Uniroyal Chemical Co.ПараметрыQuality Level 300 material polypropylene , polypropylene housing, polypropylene seal, polypropylene vent cap feature hydrophilic Торговая марка Polygard application(s) cell analysis: suitable (cell harvesting), cell culture | stem cell: suitable, sample preparation: suitable (clarification of water, buffers or aqueous solutions) L 11.8 cm (4.6 in.) O.D. 8.8 cm (3.5 in.) cartridge nominal length 4.6 in. (11.8 cm) pore size 1.0 µm nominal pore size, 1.0 µm pore size input sample type wine
sample type food(s)
sample type liquid
sample type beer
sample type beverage(s)
sample type bottled water
sample type soft drinkfitting 1/4 in. inlet/outlet hose barb Featured Industry Industrial QC (product testing) shipped in ambient Узнать цену -
Polygard® CR Small Scale Capsule Filter CR05N11HH1
eCl@ss: 32031690 NACRES: NB.24 Legal InformationPOLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Polygard is a trademark of Uniroyal Chemical Co.ПараметрыQuality Level 300 material polypropylene , polypropylene housing, polypropylene seal, polypropylene vent cap feature hydrophilic Торговая марка Polygard application(s) cell analysis: suitable (cell harvesting), cell culture | stem cell: suitable, sample preparation: suitable (clarification of water, buffers or aqueous solutions) L 11.8 cm (4.6 in.) O.D. 8.8 cm (3.5 in.) cartridge nominal length 4.6 in. (11.8 cm) pore size 5.0 µm nominal pore size, 5.0 µm pore size input sample type liquid
sample type beer
sample type food(s)
sample type bottled water
sample type soft drink
sample type beverage(s)
sample type winefitting 1/4 in. inlet/outlet hose barb Featured Industry Industrial QC (product testing) shipped in ambient Узнать цену -
Polygard® CR Small Scale Capsule Filter CR10N11HH1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: CapsuleLegal InformationPOLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Polygard is a trademark of Uniroyal Chemical Co.ПараметрыQuality Level 300 material polypropylene , polypropylene housing, polypropylene seal, polypropylene vent cap feature hydrophilic Торговая марка Polygard application(s) cell analysis: suitable (cell harvesting), cell culture | stem cell: suitable, sample preparation: suitable (clarification of water, buffers or aqueous solutions) L 11.8 cm (4.6 in.) O.D. 8.8 cm (3.5 in.) cartridge nominal length 4.6 in. (11.8 cm) pore size 10.0 µm nominal pore size, 10.0 µm pore size input sample type liquid
sample type beverage(s)
sample type bottled water
sample type wine
sample type soft drink
sample type beer
sample type food(s)fitting 1/4 in. inlet/outlet hose barb Featured Industry Industrial QC (product testing) shipped in ambient Узнать цену -
Polygard® CT Small Scale Capsule Filter CT99N11HH1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: CapsuleLegal InformationPOLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Polygard is a trademark of Uniroyal Chemical Co.ПараметрыQuality Level 300 material polypropylene , polypropylene housing, polypropylene seal, polypropylene vent cap feature hydrophilic Торговая марка Polygard application(s) cell analysis: suitable (cell harvesting), cell culture | stem cell: suitable, sample preparation: suitable (clarification of water, buffers or aqueous solutions) L 11.8 cm (4.6 in.) O.D. 8.8 cm (3.5 in.) cartridge nominal length 4.6 in. (11.8 cm) pore size 100.0 µm nominal pore size, 100.0 µm pore size input sample type beverage(s)
sample type beer
sample type liquid
sample type wine
sample type bottled water
sample type food(s)
sample type soft drinkfitting 1/4 in. inlet/outlet hose barb Featured Industry Industrial QC (product testing) shipped in ambient Узнать цену -
Polygard® CT Small Scale Capsule Filter CT25N11HH1
eCl@ss: 32031690 NACRES: NB.24 General descriptionDevice Configuration: CapsuleLegal InformationPOLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Polygard is a trademark of Uniroyal Chemical Co.ПараметрыQuality Level 300 material polypropylene , polypropylene housing, polypropylene seal, polypropylene vent cap feature hydrophilic Торговая марка Polygard application(s) cell analysis: suitable (cell harvesting), cell culture | stem cell: suitable, sample preparation: suitable (clarification of water, buffers or aqueous solutions) L 11.8 cm (4.6 in.) O.D. 8.8 cm (3.5 in.) cartridge nominal length 4.6 in. (11.8 cm) pore size 25.0 µm nominal pore size, 25.0 µm pore size input sample type soft drink
sample type beverage(s)
sample type liquid
sample type food(s)
sample type wine
sample type beer
sample type bottled waterfitting 1/4 in. inlet/outlet hose barb Featured Industry Industrial QC (product testing) shipped in ambient Узнать цену -
NovaSeptum® GO Accurate Volume Syringes
Кат. номер E461-90020 E461-90005 General descriptionNovaSeptum® GO Accurate Volume Syringes are designed to take samples from 1 mL to 20 mL, enabling operators to directly dispense sample products with milliliter accuracy. The ability to accurately measure the sample taken is particularly important for sampling of high value products and reduces expensive product waste. For sterility testing, pyrogenic testing, endotoxin testing, chemical analysis, pH analysis and fermentation applications. The syringes are ideal for storage. A closed, sterile sampling method can significantly reduce risk of cross contamination. Ideal for sampling from aseptic and sterile processes, the NovaSeptum® GO sterile sampling system provides consistently representative samples, safely and securely.
Device configuration: single unit samplingApplicationSterility testing, pyrogenic testing, endotoxin testing, chemical analysis, pH analysis, and fermentation applicationsPackagingE461-90005 (5 ml syringes, 50 units per box)
E461-90020 (20 ml syringes, 40 units per box)Components- Septum: Platinum-cured silicone
- Body: Polyester
- Cannula: ASTM® 316 L Stainless steel
- Fluid contact layer (syringe): Polycarbonate, platinum-cured silicone, medical silicone fluid
- Tubing: Silicone
- Outlet Tubing: Female and male Luer-Lok®
Preparation NoteUnits are integrity tested at regular intervals during manufacturing.
Aqueous extraction contains < 2.15 EU per device as determined using the Limulus Amebocyte Lysate (LAL) test.Legal InformationASTM is a registered trademark of American Society for Testing and Materials
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
NOVASEPTUM is a registered trademark of Millipore AB - SwedenПараметрыmaterial 316 stainless steel cannula, polycarbonate syringe (fluid contact layer), polyester body, silicone septum (platinum-cured), silicone syringe (medical fluid contact layer; platinum cured silicone), silicone tubing Quality Level 400 Agency/Method according to ISO 11137 (sterilization), according to ISO 146441, meets USP 88 Biological Reactivity (all component materials) sterility sterile; -irradiated feature autoclavable parameter -80-121 °C temp. range (-112-250 °F) (20ml), -80-134 °C temp. range (-112-273 °F) (5ml), 0.50 bar max. pressure (7.25 psi) application(s) pathogen testing: suitable (endotoxin testing), pathogen testing: suitable (pyrogenic testing), sterility testing: suitable impurities <2.15 EU/device bacterial endotoxins (LAL test) fitting female Luer-Lok® outlet, male Luer-Lok® outlet storage temp. room temp Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
