Каталог
Товары в наличии
Производители
Измерительные приборы
Перемешивание и встряхивание
Отбор проб и пробоподготовка
Перегонка, разделение и фильтрование
Нагревание и охлаждение
Дозирование жидкостей
Вакуумная техника
Микроскопы и оптика
Оборудование для очистки воды
Оборудование для очистки, дезинфекции и стерилизации
Анализ продуктов питания, воды и почв
Микробиология и биотехнология
Хроматография: приборы и принадлежности
Расходные материалы для лабораторий
Охрана труда и безопасность в лаборатории
Оборудование для фармацевтических и пищевых производств
Пилотное производство
Приборы для измерения крутящего момента
Лабораторная посуда
Мебель лабораторная
Химреактивы
Тестеры контроля качества фармацевтических препаратов
Sigma-Aldrich
Новинки
Sigma-Aldrich
- Сортировать:
- Вид таблицей
-
Carbopack™ Adsorbent 10436
EC Number: 215-609-9 General descriptionCarbotrap®/Carbopack™ Adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retain significant amounts of water. Furthermore it has a tendency to pulverize if it is packed too tightly.
A graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are:- Granular
- Friable
- Used for molecules with an analyte size relative to C3-C20+ n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbopack products are a type of GCB adsorbent.- Particles are 40 mesh and smaller
- Use 40/60 mesh to prevent channeling (if observed with a 20/40 mesh Carbotrap® adsorbent)
- Use smaller mesh (60/80, 80/100, etc.) for all other applications
- Use the smallest particle size available as long as the application can handle the pressure drop
Legal InformationCarbopack is a trademark of Sigma-Aldrich Co. LLC
Carbotrap is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging bottle of 10 g application(s) LPLC: suitable matrix Carbopack™ X matrix active group carbon particle size 40-60 mesh pore size ~0.62 cm3/g mesoporosity, ~0 cm3/g macroporosity, ~0 cm3/g microporosity, ~100 pore diameter surface area ~240 m2/g density ~0.44 g/mL (free fall denstiy) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Flash Point F Not applicable Flash Point C Not applicable 792,75 евро / 81 264 руб.Получить предложение -
Carbopack™ Adsorbent 10437-U
EC Number: 215-609-9 NACRES: SB.54 General descriptionCarbotrap®/Carbopack™ adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retain significant amounts of water. Furthermore it has a tendency to pulverize if it is packed too tightly.
A graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are:- Granular
- Friable
- Used for molecules with an analyte size relative to C3-C20+ n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbopack products are a type of GCB adsorbent.- Particles are 40 mesh and smaller
- Use 40/60 mesh to prevent channeling (if observed with a 20/40 mesh Carbotrap® adsorbent)
- Use smaller mesh (60/80, 80/100, etc.) for all other applications
- Use the smallest particle size available as long as the application can handle the pressure drop
ApplicationCarbotrap X has a very high specific surface area and was used for the recovery of low boiling hydrocarbons like 1,3-butadiene and isoprene.Legal InformationCarbopack is a trademark of Sigma-Aldrich Co. LLC
Carbotrap is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging bottle of 10 g application(s) LPLC: suitable matrix Carbopack™ X matrix active group carbon particle size 60-80 mesh pore size ~0.62 cm3/g mesoporosity, ~0 cm3/g macroporosity, ~0 cm3/g microporosity, ~100 pore diameter surface area ~240 m2/g density ~0.44 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS08 signalword Warning hcodes H351 pcodes P281 Personal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carbopack™ Adsorbent 10439-U
EC Number: 215-609-9 NACRES: SB.54 General descriptionCarbotrap®/Carbopack™ adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retain significant amounts of water. Furthermore it has a tendency to pulverize if it is packed too tightly.
Carbotrap® X has a very high specific surface area and was used for the recovery of low boiling hydrocarbons like 1,3-butadiene and isoprene.
A graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are:- Granular
- Friable
- Used for molecules with an analyte size relative to C3-C20+ n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbopack products are a type of GCB adsorbent.- Particles are 40 mesh and smaller
- Use 40/60 mesh to prevent channeling (if observed with a 20/40 mesh Carbotrap® adsorbent)
- Use smaller mesh (60/80, 80/100, etc.) for all other applications
- Use the smallest particle size available as long as the application can handle the pressure drop
Legal InformationCarbopack is a trademark of Sigma-Aldrich Co. LLC
Carbotrap is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging bottle of 50 g application(s) LPLC: suitable matrix Carbopack™ X matrix active group carbon particle size 120-400 mesh pore size ~0.62 cm3/g mesoporosity, ~0 cm3/g macroporosity, ~0 cm3/g microporosity, ~100 pore diameter surface area ~240 m2/g density ~0.39 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS08 signalword Warning hcodes H351 pcodes P281 Personal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carbopack™ Adsorbent 10461-U
EC Number: 215-609-9 NACRES: SB.54 General descriptionCarbotrap®/Carbopack™ adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retains significant amounts of water. Furthermore it has a tendency to pulverize if it is packed too tightly. Carbotrap®/Carbopack™ Adsorbent was used to quantitatively determine trace amounts of volatile organic compounds (VOCs) in air. It was also used for designing sampling protocols on the basis of its retention volume of the gaseous organic compounds of interest.
A graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are:- Granular
- Friable
- Used for molecules with an analyte size relative to C3-C20+ n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbopack products are a type of GCB adsorbent.- Particles are 40 mesh and smaller
- Use 40/60 mesh to prevent channeling (if observed with a 20/40 mesh Carbotrap® adsorbent)
- Use smaller mesh (60/80, 80/100, etc.) for all other applications
- Use the smallest particle size available as long as the application can handle the pressure drop
ApplicationCarbopack™ Y was used for determination of contamination caused by pesticides like alachlor, atrazine, captan, formothion, lindane and phosalone in atmospheric samples. Carbopack™ Y was modified with mono-molecular layer of heptakis-(2,3,6-tri-O-methyl)--cyclodextrin and was used in gas chromatography to study the effect of size and spatial structure of adsorbate molecules on adsorption of organic vapours.Legal InformationCarbopack is a trademark of Sigma-Aldrich Co. LLC
Carbotrap is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging bottle of 10 g application(s) LPLC: suitable matrix Carbopack™ Y matrix active group carbon particle size 40-60 mesh pore size ~0 cm3/g macroporosity, ~0 cm3/g mesoporosity, ~0 cm3/g microporosity, ~0 pore diameter surface area ~24 m2/g density ~0.42 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS08 signalword Warning hcodes H351 pcodes P281 Personal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carbopack™ Adsorbent 10464-U
EC Number: 215-609-9 NACRES: SB.54 General descriptionCarbotrap®/Carbopack™ adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retain significant amounts of water. Furthermore it has a tendency to pulverize if it is packed too tightly. Carbotrap®/Carbopack™ adsorbent was used to quantitatively determine trace amounts of volatile organic compounds (VOCs) in air. It was also used for designing sampling protocols on the basis of its retention volume of the gaseous organic compounds of interest.
A graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are:- Granular
- Friable
- Used for molecules with an analyte size relative to C3-C20+ n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbopack products are a type of GCB adsorbent.- Particles are 40 mesh and smaller
- Use 40/60 mesh to prevent channeling (if observed with a 20/40 mesh Carbotrap® adsorbent)
- Use smaller mesh (60/80, 80/100, etc.) for all other applications
- Use the smallest particle size available as long as the application can handle the pressure drop
ApplicationCarbopack™ Y was used for determination of contamination caused by pesticides like alachlor, atrazine, captan, formothion, lindane and phosalone in atmospheric samples. Carbopack™ Y was modified with mono-molecular layer of heptakis-(2,3,6-tri-O-methyl)--cyclodextrin and was used in gas chromatography to study the effect of size and spatial structure of adsorbate molecules on adsorption of organic vapours.Legal InformationCarbopack is a trademark of Sigma-Aldrich Co. LLC
Carbotrap is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging bottle of 50 g application(s) LPLC: suitable matrix Carbopack™ Y matrix active group carbon particle size 120-400 mesh pore size ~0 cm3/g macroporosity, ~0 cm3/g mesoporosity, ~0 cm3/g microporosity, ~0 pore diameter surface area ~24 m2/g density ~0.38 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS08 signalword Warning hcodes H351 pcodes P281 RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carbosieve® Adsorbent 10184
EC Number: 231-153-3 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carbosieve products are a type of CMS adsorbent.- Have non-tapered pores
- Very strong adsorptive strength due to only containing micropores
- Provide great performance for many small, volatile analytes that most adsorbents have trouble retaining
Legal InformationCarbosieve is a registered trademark of Sigma-Aldrich Co. LLCПараметрыform powder, crystals or granules Quality Level 100 packaging bottle of 10 g parameter 400 °C max. temp. application(s) LPLC: suitable, gas chromatography (GC): suitable, solid phase extraction (SPE): suitable matrix Carbosieve® S-III matrix active group carbon particle size 60-80 mesh pore size ~0.04 cm3/g mesoporosity, ~0.35 cm3/g microporosity, ~0 cm3/g macroporosity, ~4-11 pore diameter surface area ~975 m2/g density ~0.66 g/mL (free fall density) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 1 364,63 евро / 139 887 руб.Получить предложение -
Carbosieve® Adsorbent 10189
EC Number: 231-153-3 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carbosieve products are a type of CMS adsorbent.- Have non-tapered pores
- Very strong adsorptive strength due to only containing micropores
- Provide great performance for many small, volatile analytes that most adsorbents have trouble retaining
Legal InformationCarbosieve is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging bottle of 10 g application(s) LPLC: suitable, gas chromatography (GC): suitable, solid phase extraction (SPE): suitable matrix Carbosieve® S-II matrix active group carbon particle size 60-80 mesh pore size ~0.01 cm3/g mesoporosity, ~0.45 cm3/g microporosity, ~0 cm3/g macroporosity, ~6-15 pore diameter surface area ~1059 m2/g density ~0.61 g/mL (free fall density) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Flash Point F Not applicable Flash Point C Not applicable 7,86 евро / 806 руб.Получить предложение -
Carbosieve® Adsorbent 10197
EC Number: 231-153-3 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carbosieve products are a type of CMS adsorbent.- Have non-tapered pores
- Very strong adsorptive strength due to only containing micropores
- Provide great performance for many small, volatile analytes that most adsorbents have trouble retaining
Legal InformationCarbosieve is a registered trademark of Sigma-Aldrich Co. LLCПараметрыform powder, crystals or granules Quality Level 100 packaging bottle of 5 g application(s) LPLC: suitable, gas chromatography (GC): suitable, solid phase extraction (SPE): suitable matrix Carbosieve® G matrix active group carbon particle size 45-60 mesh pore size ~0.02 cm3/g mesoporosity, ~0.49 cm3/g microporosity, ~0 cm3/g macroporosity, ~6-15 pore diameter surface area ~1160 m2/g density ~0.27 g/mL (free fall density) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 250,13 евро / 25 641 руб.Получить предложение -
Carbosieve® Adsorbent 10190-U
NACRES: SB.54 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carbosieve products are a type of CMS adsorbent.- Have non-tapered pores
- Very strong adsorptive strength due to only containing micropores
- Provide great performance for many small, volatile analytes that most adsorbents have trouble retaining
Legal InformationCarbosieve is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form powder or granules packaging bottle of 10 g application(s) LPLC: suitable, gas chromatography (GC): suitable, solid phase extraction (SPE): suitable matrix Carbosieve® S-II matrix active group carbon particle size 80-100 mesh pore size ~0.01 cm3/g mesoporosity, ~0.45 cm3/g microporosity, ~0 cm3/g macroporosity, ~6-15 pore diameter surface area ~1059 m2/g density ~0.61 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS05 signalword Danger hcodes H318 pcodes P280-P305 + P351 + P338 + P310 Personal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
Carbosieve® Adsorbent 10198
EC Number: 231-153-3 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carbosieve products are a type of CMS adsorbent.- Have non-tapered pores
- Very strong adsorptive strength due to only containing micropores
- Provide great performance for many small, volatile analytes that most adsorbents have trouble retaining
Legal InformationCarbosieve is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form powder or granules packaging bottle of 5 g application(s) LPLC: suitable, gas chromatography (GC): suitable, solid phase extraction (SPE): suitable matrix Carbosieve® G matrix active group carbon particle size 60-80 mesh pore size ~0.02 cm3/g mesoporosity, ~0.49 cm3/g microporosity, ~0 cm3/g macroporosity, ~6-15 pore diameter (free fall density) surface area ~1160 m2/g density ~0.27 g/mL (free fall density) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Flash Point F Not applicable Flash Point C Not applicable 14,24 евро / 1 460 руб.Получить предложение -
Carbosieve® Adsorbent 10199
EC Number: 231-153-3 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carbosieve products are a type of CMS adsorbent.- Have non-tapered pores
- Very strong adsorptive strength due to only containing micropores
- Provide great performance for many small, volatile analytes that most adsorbents have trouble retaining
Legal InformationCarbosieve is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form powder or granules packaging bottle of 5 g application(s) LPLC: suitable, gas chromatography (GC): suitable, solid phase extraction (SPE): suitable matrix Carbosieve® G matrix active group carbon particle size 80-100 mesh pore size ~0.02 cm3/g mesoporosity, ~0.49 cm3/g microporosity, ~0 cm3/g macroporosity, ~6-15 pore diameter surface area ~1160 m2/g density ~0.27 g/mL (free fall density) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Flash Point F Not applicable Flash Point C Not applicable 37,11 евро / 3 804 руб.Получить предложение -
Carbotrap® Adsorbent 20309
General descriptionA graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are:- Granular
- Friable
- Used for molecules with an analyte size relative to C3-C20+ n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbotrap products are a type of GCB adsorbent.- Particles are 20/40 mesh
- These large particles allow high flow rates without excessive pressure drops
Legal InformationCarbotrap is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging bottle of 10 g application(s) LPLC: suitable matrix Carbotrap® C matrix active group carbon particle size 20-40 mesh pore size ~0 cm3/g macroporosity, ~0 cm3/g mesoporosity, ~0 cm3/g microporosity, ~0 pore diameter surface area ~100 m2/g density ~0.70 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS08 signalword Warning hcodes H351 pcodes P281 RIDADR NONH for all modes of transport WGK Germany nwg 291,00 евро / 29 830 руб.Получить предложение -
Carbotrap® Adsorbent 11047-U
EC Number: 215-609-9 NACRES: SB.54 General descriptionCarbotrap® C was used for the sampling and quantitative analysis of microbially produced volatiles using thermal desorption-gas chromatography.
Carbotrap®/Carbopack™ Adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retain significant amounts of water. Furthermore it has a tendency to pulverize if it is packed too tightly.
A graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are:- Granular
- Friable
- Used for molecules with an analyte size relative to C3-C20+ n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbotrap products are a type of GCB adsorbent.- Particles are 20/40 mesh
- These large particles allow high flow rates without excessive pressure drops
Legal InformationCarbopack is a trademark of Sigma-Aldrich Co. LLC
Carbotrap is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging bottle of 500 g application(s) LPLC: suitable, gas chromatography (GC): suitable matrix Carbotrap® C matrix active group carbon particle size 20-40 mesh pore size ~0 cm3/g macroporosity, ~0 cm3/g mesoporosity, ~0 cm3/g microporosity, ~0 pore diameter surface area ~10 m2/g bulk density ~0.70 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS08 signalword Warning hcodes H351 Personal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carbotrap® Adsorbent 10435-U
EC Number: 215-609-9 NACRES: SB.54 General descriptionCarbotrap®/Carbopack™ adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retain significant amounts of water. Furthermore it has a tendency to pulverize if it is packed too tightly.
Carbotrap® X has a very high specific surface area and was used for the recovery of low boiling hydrocarbons like 1,3-butadiene and isoprene.
A graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are:- Granular
- Friable
- Used for molecules with an analyte size relative to C3-C20+ n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbotrap products are a type of GCB adsorbent.- Particles are 20/40 mesh
- These large particles allow high flow rates without excessive pressure drops
Legal InformationCarbopack is a trademark of Sigma-Aldrich Co. LLC
Carbotrap is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging bottle of 10 g application(s) LPLC: suitable matrix Carbotrap® X matrix active group carbon particle size 20-40 mesh pore size ~0.62 cm3/g mesoporosity, ~0 cm3/g macroporosity, ~0 cm3/g microporosity, ~100 pore diameter surface area ~240 m2/g density ~0.44 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS08 signalword Warning hcodes H351 pcodes P281 Personal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carbotrap® Adsorbent 10460-U
EC Number: 215-609-9 NACRES: SB.54 General descriptionCarbotrap®/Carbopack™ adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retain significant amounts of water. Furthermore it has a tendency to pulverize if it is packed too tightly. Carbotrap®/Carbopack™ adsorbent was used to quantitatively determine trace amounts of volatile organic compounds (VOCs) in air. It was also used for designing sampling protocols on the basis of its retention volume of the gaseous organic compounds of interest.
Carbopack™ Y was used for determination of contamination caused by pesticides like alachlor, atrazine, captan, formothion, lindane and phosalone in atmospheric samples. Carbopack Y was modified with mono-molecular layer of heptakis-(2,3,6-tri-O-methyl)--cyclodextrin and was used in gas chromatography to study the effect of size and spatial structure of adsorbate molecules on adsorption of organic vapours.
A graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are:- Granular
- Friable
- Used for molecules with an analyte size relative to C3-C20+ n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbotrap products are a type of GCB adsorbent.- Particles are 20/40 mesh
- These large particles allow high flow rates without excessive pressure drops
Legal InformationCarbopack is a trademark of Sigma-Aldrich Co. LLC
Carbotrap is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging bottle of 10 g application(s) LPLC: suitable matrix Carbotrap® Y matrix active group carbon particle size 20-40 mesh pore size ~0 cm3/g macroporosity, ~0 cm3/g mesoporosity, ~0 cm3/g microporosity, ~0 pore diameter surface area ~24 m2/g density ~0.44 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS08 signalword Warning hcodes H351 pcodes P281 Personal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carbotrap® Adsorbent 11325-U
EC Number: 215-609-9 NACRES: SB.54 General descriptionCarboxen® 569 was used for trapping a range of replacement chlorofluorocarbons varying in boiling point from -48.4 to -9.8°C which is highly advantageous for analysis of trace gases in atmosphere.
Carboxen® Adsorbent is ideally used for solid-phase microextraction (SPME). It is highly efficient in extraction of small polar molecules from aqueous solution.
A graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are:- Granular
- Friable
- Used for molecules with an analyte size relative to C3-C20+ n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbotrap products are a type of GCB adsorbent.- Particles are 20/40 mesh
- These large particles allow high flow rates without excessive pressure drops
FootnotePack of 144 ampulesLegal InformationCarbotrap is a registered trademark of Sigma-Aldrich Co. LLC
Carboxen is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form granular packaging pack of 144 x 190 mg application(s) LPLC: suitable matrix Carbotrap® B matrix active group carbon particle size 20-40 mesh pore size ~0 cm3/g macroporosity, ~0 cm3/g mesoporosity, ~0 cm3/g microporosity, ~0 pore diameter surface area ~100 m2/g density ~0.38 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS08 signalword Warning hcodes H351 RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carboxen® Adsorbent 10478-U
EC Number: 231-153-3 NACRES: SB.54 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carboxen products are a type of CMS adsorbent.- Have tapered pores, resulting in excellent thermodynamic properties for both adsorption and desorption (have the best thermodynamic performance of any adsorbents)
- The surface chemistry can be tailored for specific target analytes
Legal InformationCarboxen is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form powder packaging bottle of 10 g application(s) LPLC: suitable matrix Carboxen® 1000 matrix active group carbon particle size 60-80 mesh pore size ~0.16 cm3/g mesoporosity, ~0.25 cm3/g macroporosity, ~0.44 cm3/g microporosity, ~10-12 pore diameter surface area ~1200 m2/g density ~0.47 g/mL (free fall density) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carboxen® Adsorbent 10471
EC Number: 231-153-3 General descriptionCarboxen® 1003 was used for the adsorption of lipopolysaccharides (LPS) as it can accommodate large LPS and their agglomerates.
Carboxen® Adsorbent is ideally used for solid-phase microextraction (SPME). It is highly efficient in extraction of small polar molecules from aqueous solution.
A carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carboxen products are a type of CMS adsorbent.- Have tapered pores, resulting in excellent thermodynamic properties for both adsorption and desorption (have the best thermodynamic performance of any adsorbents)
- The surface chemistry can be tailored for specific target analytes
Legal InformationCarboxen is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form powder packaging bottle of 10 g application(s) LPLC: suitable matrix Carboxen® 1003 matrix active group carbon particle size 40-60 mesh pore size ~0.26 cm3/g mesoporosity, ~0.28 cm3/g macroporosity, ~0.38 cm3/g microporosity, ~5-8 pore diameter surface area ~1000 m2/g density ~0.49 g/mL (free fall density) separation technique reversed phase
Safety InformationRIDADR NONH for all modes of transport WGK Germany nwg Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carboxen® Adsorbent 11048-U
EC Number: 231-153-3 NACRES: SB.54 General descriptionCarboxen® Adsorbent is ideally used for solid-phase microextraction (SPME). It is highly efficient in extraction of small polar molecules from aqueous solution.
A carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carboxen products are a type of CMS adsorbent.- Have tapered pores, resulting in excellent thermodynamic properties for both adsorption and desorption (have the best thermodynamic performance of any adsorbents)
- The surface chemistry can be tailored for specific target analytes
ApplicationCarboxen® 569 was used for trapping a range of replacement chlorofluorocarbons varying in boiling point from -48.4 to -9.8°C which is highly advantageous for analysis of trace gases in atmosphere.Legal InformationCarboxen is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form powder packaging bottle of 500 g application(s) LPLC: suitable matrix Carboxen® 569 matrix active group carbon particle size 20-45 mesh pore size ~0.10 cm3/g macroporosity, ~0.14 cm3/g mesoporosity, ~0.20 cm3/g microporosity, ~5-8 pore diameter surface area ~485 m2/g density ~0.61 g/mL (free fall density) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carboxen® Adsorbent 10269
EC Number: 231-153-3 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carboxen products are a type of CMS adsorbent.- Have tapered pores, resulting in excellent thermodynamic properties for both adsorption and desorption (have the best thermodynamic performance of any adsorbents)
- The surface chemistry can be tailored for specific target analytes
Legal InformationCarboxen is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form powder packaging bottle of 10 g application(s) LPLC: suitable matrix Carboxen® 569 matrix active group carbon particle size 20-45 mesh pore size ~0.10 cm3/g macroporosity, ~0.14 cm3/g mesoporosity, ~0.20 cm3/g microporosity, ~5-8 pore diameter surface area ~485 m2/g density ~0.61 g/mL (free fall density) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges RIDADR UN1362 - class 4.2 - PG 3 - Carbon, activated WGK Germany nwg Flash Point F Not applicable Flash Point C Not applicable 272,73 евро / 27 957 руб.Получить предложение -
Carboxen® Adsorbent 10477-U
EC Number: 231-153-3 NACRES: SB.54 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carboxen products are a type of CMS adsorbent.- Have tapered pores, resulting in excellent thermodynamic properties for both adsorption and desorption (have the best thermodynamic performance of any adsorbents)
- The surface chemistry can be tailored for specific target analytes
Legal InformationCarboxen is a registered trademark of Sigma-Aldrich Co. LLCПараметрыform powder packaging bottle of 50 g application(s) LPLC: suitable matrix Carboxen® 1000 matrix active group carbon particle size 40-60 mesh pore size ~0.16 cm3/g mesoporosity, ~0.25 cm3/g macroporosity, ~0.44 cm3/g microporosity, ~10-12 pore diameter surface area ~1200 m2/g density ~0.50 g/mL (free fall density) separation technique reversed phase
Safety InformationRIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Carboxen® Adsorbent 11324-U
NACRES: SB.54 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carboxen products are a type of CMS adsorbent.- Have tapered pores, resulting in excellent thermodynamic properties for both adsorption and desorption (have the best thermodynamic performance of any adsorbents)
- The surface chemistry can be tailored for specific target analytes
FootnotePack of 144 ampulesLegal InformationCarboxen is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form powder packaging pack of 144 x 290 mg application(s) LPLC: suitable matrix Carboxen® 564 matrix active group carbon particle size 20-45 mesh pore size ~0.13 cm3/g mesoporosity, ~0.14 cm3/g macroporosity, ~0.24 cm3/g microporosity, ~6-9 pore diameter surface area ~400 m2/g density ~0.61 g/mL (free fall density) separation technique reversed phase
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Carboxen® Adsorbent 11072-U
NACRES: SB.54 General descriptionA carbon molecular sieve (CMS) is the porous carbon skeletal framework that remains after pyrolysis of a polymeric precursor. These particles are:- Spherical (better packed bed performance than granular particles)
- Hard and non-friable (pack well, will not break)
- Highly porous (high surface areas)
- Used for molecules with an analyte size relative to C2-C5 n-alkanes
- Hydrophobic (can be used in high humidity environments)
Generally, CMS adsorbents offer greater relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) and graphitized carbon black (GCB) adsorbents. Our Carboxen products are a type of CMS adsorbent.- Have tapered pores, resulting in excellent thermodynamic properties for both adsorption and desorption (have the best thermodynamic performance of any adsorbents)
- The surface chemistry can be tailored for specific target analytes
Legal InformationCarboxen is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 form powder packaging bottle of 10 g application(s) LPLC: suitable matrix Carboxen® 572 matrix active group carbon particle size 20-45 mesh pore size ~0.19 cm3/g mesoporosity, ~0.24 cm3/g macroporosity, ~0.41 cm3/g microporosity, ~10-12 pore diameter surface area ~1100 m2/g density ~0.48 g/mL (free fall density) separation technique reversed phase
Safety Informationpictograms GHS07 signalword Warning hcodes H315-H319-H335 pcodes P261-P305 + P351 + P338 RIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
Celite® 545 AW 20199-U
CAS Number: 68855-54-9 MDL number: MFCD00132803 PubChem Substance ID: 329751988 NACRES: SB.52 General descriptionDiatomaceous earth [Celite 545 AW] is considered as skeletal remains of single-celled algae/diatoms formed due to sedimentary deposits. DE is a surface-active agent which causes abrasion and adsorption of the cuticular lipids. DE is an effective alternative to chemical pesticides. DE, amorphous silica which is crushed and calcined to form cristobalite.
Reagent-grade Celite® 545 AW. Acid-washed, high-purity fluxcalcined diatomaceous silica, especially prepared for chromatography and other laboratory applications.Application- Celite® 545 AW was used as stationary phase in purification of fagopyritols using preparative chromatography.
- Celite® 545 AW was used as packing material for fractionating procedure and the fractions were analysed using GC-ECD, GC/ECNI-MS and IC-MS/MS.
Legal InformationCelite is a registered trademark of Imerys Minerals California, Inc.ПараметрыQuality Level 100 grade reagent grade form powder packaging pkg of 454 g application(s) LPLC: suitable matrix Silica matrix active group silica particle size 26 µm pore size 170000 mean pore size surface area 2-3.5 m2/g separation technique hydrophilic interaction (HILIC) SMILES string O=[Si]=O InChI 1S/O2Si/c1-3-2 InChI key VYPSYNLAJGMNEJ-UHFFFAOYSA-N
Safety Informationpictograms GHS07, GHS08 signalword Warning hcodes H319-H335-H373 pcodes P260-P305 + P351 + P338 Personal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
Celite® Analytical Filter Aid II (CAFA II)
MDL number: MFCD00132803 PubChem Substance ID: 329775299
Кат. номер 11484-U 11485-U 11486-U 11487-U Legal InformationCelite is a registered trademark of Imerys Minerals California, Inc.Параметрыpackaging pkg of 1 x 1 kg (11486-U), pkg of 1 x 100 g (11484-U), pkg of 1 x 500 g (11485-U) application(s) LPLC: suitable matrix Silica separation technique hydrophilic interaction (HILIC) SMILES string O=[Si]=O InChI 1S/O2Si/c1-3-2 InChI key VYPSYNLAJGMNEJ-UHFFFAOYSA-N
Safety Informationpictograms GHS08 signalword Warning hcodes H373 pcodes P260 RIDADR NONH for all modes of transport WGK Germany nwg Узнать цену -
Celite® R566
NACRES: SB.52
Кат. номер 64843-1KG-U 64843-30KG-U 64843-6X30KG-U General descriptionCelite® R566 is primarily used to interact with target reagents, but it may also be adjusted to fit corresponding scientific methods.Legal InformationCelite is a registered trademark of Imerys Minerals California, Inc.ПараметрыQuality Level 100 grade reagent grade form powder application(s) LPLC: suitable matrix Silica matrix active group silica particle size 2000 µm pore size 120 mean pore size surface area 500 m2/g (approx.) separation technique hydrophilic interaction (HILIC)
Safety Informationpictograms GHS08 signalword Danger hcodes H350 - H372 pcodes P201 - P202 - P260 - P264 - P270 - P308 + P313 Target Organs Lungs Personal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Cellulose
CAS Number: 9004-34-6 EC Number: 232-674-9 MDL number: MFCD00081512 NACRES: SB.52
Кат. номер 22183-VAR-F 22183-1KG-F 22183-250G-F General descriptionCellulose, a homopolymer consisting of glucose units joined by beta-1,4 bonds. These are strongly attached through inter and intramolecular hydrogen bonds and van der Waals forces resulting in microfibrils which together form fibers. They are arranged in parallel reducing ends of adjacent glucan chains. Cellulose is widely used as sorbent in TLC.ApplicationCellulose was used to measure the cyrstallinity index using X-ray diffraction (XRD) patterns and solid-state 13C nuclear magnetic resonance spectra.
High purity cellulose powders for partition chromatography.Параметрыgrade for column chromatography Quality Level 100 form powder application(s) LPLC: suitable fiber L 0.01-0.10 mm ign. residue ~0.1% matrix Cellulose matrix active group polymer particle size 10-100 μm cation traces Cu: ≤10 mg/kg, Fe: ≤20 mg/kg separation technique size exclusion (SEC)
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Cellulose acetate phthalate
Empirical Formula (Hill Notation): C116H116O64 CAS Number: 9004-38-0 Molecular Weight: 2534.12 MDL number: MFCD00072769 NACRES: SB.52
Кат. номер 22192-100G-F 22192-VAR-F 22192-500G-F General descriptionCellulose acetate phthalate (CAP) is a microbicide which inactivates sexually transmitted disease (STD) pathogens like HIV-1. CAP has been used for enteric film coating of tablets and capsules.ApplicationCAP is used as a stabiling agent in the preparation of Pseudolatex.Packaging100, 500 g in poly bottleПараметрыform powder Quality Level 200 application(s) LPLC: suitable matrix acetylated cellulose matrix active group phthalate capacity 1.0 meq/mL separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Chromatography columns, general-purpose
NACRES: SB.52
Кат. номер C2103-200EA C2103-5EA C2103-200EAPW General description- Precision molded from premium-grade, chemically inert plastic for organic solvents
- Includes reservoir & end caps
- Polyethylene filter matrix support in medium porosity
ApplicationFor use in general chromatographic work for extraction of components, with special applications in isoenzyme and protein studies, hemoglobin fractionation and desalting.Параметрыmaterial polypropylene application(s) LPLC: suitable Overall H 5 in. volume 10 mL Узнать цену -
Chromatography funnel Z400696-1EA
NACRES: NC.05 General descriptionUse for solvent addition in flash chromatography. Designed to not disturb the top layer of the column; a perforated stem with a closed-end permits solvent to pour down column walls.Параметрыmaterial polypropylene (Unbreakable) application(s) LPLC: suitable Overall H 65 mm stem L 20 mm top O.D. 68 mm volume 60 mL Узнать цену -
Chromatography funnel Z400718-1EA
NACRES: NC.05 General descriptionUse for solvent addition in flash chromatography. Designed to not disturb the top layer of the column; a perforated stem with a closed-end permits solvent to pour down column walls.Параметрыmaterial polypropylene (Unbreakable) application(s) LPLC: suitable Overall H 95 mm stem L 22 mm top O.D. 88 mm volume 120 mL Узнать цену -
Chromatography funnel Z400726-1EA
General descriptionUse for solvent addition in flash chromatography. Designed to not disturb the top layer of the column; a perforated stem with a closed-end permits solvent to pour down column walls.Параметрыmaterial polypropylene (Unbreakable) application(s) LPLC: suitable Overall H 115 mm stem L 38 mm top O.D. 108 mm volume 240 mL Узнать цену -
Chromatography funnel Z400734-1EA
NACRES: NC.05 General descriptionUse for solvent addition in flash chromatography. Designed to not disturb the top layer of the column; a perforated stem with a closed-end permits solvent to pour down column walls.Параметрыmaterial polypropylene (Unbreakable) application(s) LPLC: suitable Overall H 175 mm stem L 50 mm top O.D. 168 mm volume 960 mL Узнать цену -
Chromatography funnel Z400742-1EA
General descriptionUse for solvent addition in flash chromatography. Designed to not disturb the top layer of the column; a perforated stem with a closed-end permits solvent to pour down column walls.Параметрыmaterial polypropylene (Unbreakable) application(s) LPLC: suitable Overall H 185 mm stem L 70 mm top O.D. 168 mm volume 960 mL Узнать цену -
Column for flash-chromatography assembly with threaded joints Z147478-1EA
NACRES: NC.05 LinkageSee the Threaded Ground Glass Tutorial to see how threaded joints work.ПараметрыJoint Joint: ST/NS24/40 description Standard column application(s) LPLC: suitable capacity 100 mL column O.D. × L 19 mm x 813 mm Узнать цену -
Column for flash-chromatography assembly with threaded joints Z202975-1EA
eCl@ss: 32060201 NACRES: SB.52 LinkageSee the Threaded Ground Glass Tutorial to see how threaded joints work.ПараметрыJoint Joint: ST/NS29/32 description Standard column application(s) LPLC: suitable capacity 100 mL column O.D. × L 19 mm x 813 mm Узнать цену -
Column for flash-chromatography assembly with threaded joints Z147486-1EA
NACRES: NC.05 LinkageSee the Threaded Ground Glass Tutorial to see how threaded joints work.ПараметрыJoint Joint: ST/NS24/40 description Standard column application(s) LPLC: suitable capacity 200 mL column O.D. × L 25 mm x 584 mm Узнать цену -
Column for flash-chromatography assembly with threaded joints Z202983-1EA
eCl@ss: 32060201 NACRES: NC.05 LinkageSee the Threaded Ground Glass Tutorial to see how threaded joints work.ПараметрыJoint Joint: ST/NS29/32 description Standard column application(s) LPLC: suitable capacity 200 mL column O.D. × L 25 mm x 584 mm Узнать цену -
Column for flash-chromatography assembly with threaded joints Z147494-1EA
eCl@ss: 32060201 LinkageSee the Threaded Ground Glass Tutorial to see how threaded joints work.ПараметрыJoint Joint: ST/NS24/40 description Standard column application(s) LPLC: suitable capacity 400 mL column O.D. × L 38 mm x 560 mm Узнать цену -
Column for flash-chromatography assembly with threaded joints Z202991-1EA
NACRES: NC.05 LinkageSee the Threaded Ground Glass Tutorial to see how threaded joints work.ПараметрыJoint Joint: ST/NS29/32 description Standard column application(s) LPLC: suitable capacity 400 mL column O.D. × L 38 mm x 560 mm Узнать цену -
Column for flash-chromatography assembly with threaded joints Z202479-1EA
NACRES: NC.05 LinkageSee the Threaded Ground Glass Tutorial to see how threaded joints work.ПараметрыJoint Joint: ST/NS45/40 description Standard column application(s) LPLC: suitable capacity 1,000 mL column O.D. × L 57 mm x 508 mm Узнать цену -
Column for flash-chromatography assembly with threaded joints Z147516-1EA
NACRES: NC.05 LinkageSee the Threaded Ground Glass Tutorial to see how threaded joints work.ПараметрыJoint Joint: ST/NS45/50 description Standard column application(s) LPLC: suitable capacity 1,000 mL column O.D. × L 57 mm x 508 mm Узнать цену -
Column for flash-chromatography assembly with threaded joints Z202495-1EA
NACRES: SB.52 LinkageSee the Threaded Ground Glass Tutorial to see how threaded joints work.ПараметрыJoint Joint: ST/NS45/40 description Standard column application(s) LPLC: suitable capacity 2,000 mL column O.D. × L 76 mm x 560 mm Узнать цену -
Column for flash-chromatography assembly with threaded joints Z147524-1EA
NACRES: NC.05 LinkageSee the Threaded Ground Glass Tutorial to see how threaded joints work.ПараметрыJoint Joint: ST/NS45/50 description Standard column application(s) LPLC: suitable capacity 2,000 mL column O.D. × L 76 mm x 560 mm Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
