Conductive silver printing ink, resistivity 30 - 35 -cm

NACRES:

NA.23

Кат. номер

791903-20G

791903-10G

Conductive silver printing ink, resistivity 30-35 μΩ-cm, is a combination of polymer coated silver particles and silver-based compounds in an organic medium. It is a low cost conductive ink that can be printed on a variety of substrates like polyester, glass, and indium tin oxide (ITO) which can be cured at 150-180 °C.
Conductive silver inks can be coated in between reduced graphene oxide (rGO) and copper surfaces to stabilize the charge carrying medium which can be used in the fabrication of a thermistor. Laser induced forward transfer (LIFT) may use conductive silver printing inks to print indium tin oxide nanoparticles based thin films for solar cells and organic light emitting diodes (OLEDS) based applications.
This Conductive Silver ink is an economical grade of specially formulated, screen-printable, conductive silver ink which provides good conductivity at low cure temperatures. This conductive silver ink provides low resistance of printed conducting tracks.
This Conductive Silver Printing Ink is comprised of a mixture of pure silver particles and organometallic silver compound in an organic medium. When printed on polyester (PET or PEN) films and then cured at 150 - 180°C, the particles consolidate to form a chemically-welded, continuous silver track to yield low bulk resistivity.
10, 20 g in glass bottle
Dyesol is a registered trademark of Greatcell Solar

Quality Level	100
assay	65-75% (Solids content)
form	paste (white)
volume resistivity	30-35 µ-cm (at a 180°C cure temperature)
viscosity	6000-9000 mPa.s (at shear rate of 10 sec-1 at 25°C)

pictograms	GHS07,GHS09
signalword	Warning
hcodes	H315 - H319 - H410
pcodes	P273 - P302 + P352 - P305 + P351 + P338
WGK Germany	WGK 3
Flash Point F	174.2 °F
Flash Point C	79 °C