20696937 VACUUBRAND
Результат поиска цен по запросу "20696937"
MD 4C EX VARIO +AK+EK, ATEX
Химическая станция MD 4C EX VARIO +AK+EK, VACUUBRAND
Данные актуальны на 26.03.2026.
| Цена (евро): | 20441,57 € |
|---|---|
| Цена (руб.): | 1874446,92 руб. |
| Артикул DV-Expert: | 4670369 |
| Артикул производителя: | 20696937 * |
| Производитель: | VACUUBRAND |
| Срок действия: | 31.12.2026 |
| Последнее обновление: | 31.12.2025 |
Получить предложение
Компания ДВ-Эксперт осуществляет поставки «20696937 VACUUBRAND» напрямую с завода-изготовителя. Для того, чтобы получить коммерческое предложение на «20696937 VACUUBRAND», пожалуйста, отправьте заявку в отдел продаж.
Chemistry pumping unit
MD 4C EX VARIO +AK+EK,
three stage, 230 V / 50 Hz,
with ATEX approval:
pumping chamber (pumped gases):
II 2G Ex h IIC T3 Gb X
environment (without inert purge gas):
II 3G Ex h IIB T4 Gc X
environment (with inert purge gas):
II 2G Ex h IIB T4 Gb X
motor: II 2G Ex db IIB T4 Gb
cable without plug,
control signal line 4-20 mA without plug
The necessary accessories for the control of variable speed pumps with
ATEX category 2 approval and also for the operation of vacuum sensors
with ATEX approval may consist of single components. These components
must not be installed in the ATEX area itself. We recommend the
installation in a suitable switch cabinet. The installation of
electrical systems for EX areas must be performed according to the
applicable national requirements and standards, especially according to
IEC EN DIN 60079-11, by a qualified and trained professional.
MD 4C EX VARIO +AK+EK,
three stage, 230 V / 50 Hz,
with ATEX approval:
pumping chamber (pumped gases):
II 2G Ex h IIC T3 Gb X
environment (without inert purge gas):
II 3G Ex h IIB T4 Gc X
environment (with inert purge gas):
II 2G Ex h IIB T4 Gb X
motor: II 2G Ex db IIB T4 Gb
cable without plug,
control signal line 4-20 mA without plug
The necessary accessories for the control of variable speed pumps with
ATEX category 2 approval and also for the operation of vacuum sensors
with ATEX approval may consist of single components. These components
must not be installed in the ATEX area itself. We recommend the
installation in a suitable switch cabinet. The installation of
electrical systems for EX areas must be performed according to the
applicable national requirements and standards, especially according to
IEC EN DIN 60079-11, by a qualified and trained professional.
| Net weight: | 37 kg |
| Net weight: | 36 kg |
| Customs tariff number: | 84141089 |
| Customs tariff number: | 84141089 |
| Country of origin: | Germany |
| Country of origin: | Germany |
| Gross weight: | 48 kg |
| Gross weight: | 53 kg |
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
