Analytical Chromatography

Amberlite IRA-410 was used as packing material for columns. Amberlite IRA-410 was also used in urinary analysis by HPLC.
Strongly basic (type II) anion exchange resin for water conditioning, removing iodine ions, neutralization of solutions, capturing xanthan and xanthene dyes, etc.; better regeneration efficiency than type I base resin.

100, 500 g in poly bottle

Strongly basic gel-type resin with benzyldimethyl(2-hydroxyethyl)ammonium functionality chloride ion form useful in catalytic applications.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	200
vapor density	<1 (vs air)
vapor pressure	17 mmHg ( 20 °C)
form	beads
autoignition temp.	800 °F
parameter	40 °C OH^- form max. temp., 77 °C Cl^- form max. temp.
moisture	45-51%
application(s)	LPLC: suitable
matrix	styrene/divinylbenzene
matrix active group	benzyldimethyl(2-hydroxyethyl)ammonium functional group
particle size	20-25 mesh, 600-750 µm
operating pH	0 - 14
capacity	1.25 meq/mL by wetted bed volume
separation technique	anion exchange
InChI	1S/C13H20NO.C10H10.ClH/c1-4-12-7-5-6-8-13(12)11-14(2,3)9-10-15;1-3-9-7-5-6-8-10(9)4-2;/h4-8,15H,1,9-11H2,2-3H3;3-8H,1-2H2;1H/q+1;;/p-1
InChI key	DPRMXNMXCFHCAS-UHFFFAOYSA-M

Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Amberlite IRA 67 is a weakly basic anion exchange resin with high capacity for large organics.

Подробнее

Amberlite® IRA-67 free base

CAS Number:	65899-87-8
MDL number:	MFCD00145567
NACRES:	SB.52

Weakly basic anion exchange resin with an unusually high capacity for large organics. Common applications include: deacidification, deionization of process liquors, isolation of acidic natural products, purification of novabiacin and cephalosporins, separation of neutral and acidic amino acids below pH 10, removal of heparinic acid at low pH, concentration of citric acid, and demineralization of cheese whey.
Amberlite IRA 67 was used to determine the suitability for lactic acid.

100 g in poly bottle
1 kg in poly bottle

Physical form

Weakly basic gel, tertiary amine functionality

Previously known as IRA-68.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	beads
moisture	~60%
application(s)	LPLC: suitable
matrix	Acrylic (gel)
matrix active group	tertiary amine
particle size	500-750 µm
capacity	1.6 meq/mL by wetted bed volume
separation technique	anion exchange
InChI	1S/C12H18O3.C10H10.C8H16N2O/c1-3-5-7-13-9-11-15-12-10-14-8-6-4-2;1-3-9-7-5-6-8-10(9)4-2;1-4-8(11)9-6-5-7-10(2)3/h3-4,9-12H,1-2,5-8H2;3-8H,1-2H2;4H,1,5-7H2,2-3H3,(H,9,11)/b11-9+,12-10+;;
InChI key	ZGXNLYRRYYOMNG-JDDKLYJPSA-N

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Amberlite® IRA-900 chloride form is a macroporous, polystyrenic type 1 resin. This resin was found to catalyze the photodecomposition of carbon tetrachloride in ethanol.

Подробнее

Amberlite® IRA-900 chloride form

MDL number:	MFCD00132712
PubChem Substance ID:	329752189

Strongly basic (type I) anion exchange resin for decolorizing intermediate to light solutions, concentrating heparin at neutral pH, removing metal ions, etc.
Amberlite® IRA-900 modified with metallophthalocyanines was used to remove 4-nitorphenol.

500 g in poly bottle

Strongly basic, macroreticular resin of moderately high porosity with benzyltrialkylammonium functionality which is useful in decolorizing and removal of organic materials.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
vapor density	<1 (vs air)
vapor pressure	17 mmHg ( 20 °C)
form	beads
crosslinking	>95 % cross-linked
autoignition temp.	800 °F
parameter	60 °C OH^- form max. temp., 77 °C Cl^- form max. temp.
moisture	58-64%
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (macroreticular)
matrix active group	quaternary ammonium
particle size	650-820 µm
operating pH	0 - 14
capacity	1.0 meq/mL by wetted bed volume
separation technique	anion exchange

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Weakly basic anion exchange resin, useful for deionization, chromate recovery, formaldehyde deacidification, ammonium nitrate removal and recovery. Does NOT meet FDA Food Additive Regulation 21 CFR 173.25.

Подробнее

Amberlite® IRA-96 free base

CAS Number:	39409-19-3
MDL number:	MFCD00166430
NACRES:	SB.52

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

description	weakly basic
form	beads
parameter	100 °C max. temp.
moisture	57-63%
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (macroporous)
matrix active group	polyamine functional group
particle size	20-27 mesh, 550-750 µm
operating pH	0 - 7
capacity	1.25 meq/mL by wetted bed volume
separation technique	anion exchange

199,52 евро / 18 762 руб.

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Strongly basic (type I) anion exchange resin for water conditioning, removal of weakly acidic contaminants. Chemically the same as Amberlite® IRA400, but with lower crosslinkage to give better diffusion rates with large organics.

Подробнее

Amberlite® IRA402 chloride form

CAS Number:	52439-77-7
MDL number:	MFCD00145564
NACRES:	SB.52

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

description	strongly basic
form	beads
parameter	60 °C OH^- form max. temp., 77 °C Cl^- form max. temp.
cross-linkage	6%
moisture	49-60%
application(s)	LPLC: suitable
loss	~55% loss on drying, 110 °C
matrix	styrene-divinylbenzene (gel)
matrix active group	quaternary ammonium functional group
particle size	20-25 mesh, 600-750 µm
operating pH	0 - 14
capacity	1.2 meq/mL by wetted bed volume
separation technique	anion exchange

Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Amberlite® IRA743 free base is of styrenic, macroreticular form.

Подробнее

Amberlite® IRA743 free base

CAS Number:	63181-98-6
MDL number:	MFCD00132701
NACRES:	SB.52

Borate-specific chelating resin for the removal of borate, boric acid, other boron species from water; highly selective so that salts, including bases, do not interfere significantly.

Weakly basic resin with N-methylglucaomine functionality which is useful in boron-specific applications.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
vapor density	<1 (vs air)
vapor pressure	17 mmHg ( 20 °C)
description	weakly basic anion exchange resin
form	beads
autoignition temp.	~800 °F
moisture	48-54%
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (macroporous)
matrix active group	N-methylglucamine (free base form) functional group
particle size	500-700 µm
capacity	0.7 meq/mL by wetted bed volume
separation technique	affinity
InChI	1S/C16H25NO6.C10H10/c1-3-10-6-4-5-7-11(10)8-17(2)16(23)15(22)14(21)13(20)12(19)9-18;1-3-9-7-5-6-8-10(9)4-2/h3-7,12-16,18-23H,1,8-9H2,2H3;3-8H,1-2H2/t12-,13-,14+,15-,16?;/m1./s1
InChI key	STVMLWQMXHXTJS-ULVCUCBLSA-N

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Strongly basic (type II) anion exchange resin for water conditioning and deionization, removal of sulfuric acid and color, etc. The type II base provides improved regeneration efficiency over type I base resin.

Подробнее

Amberlite® IRA910 chloride form

CAS Number:	37264-66-7
MDL number:	MFCD00145799
NACRES:	SB.52

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

form	beads
parameter	40 °C OH^- form max. temp., 77 °C Cl^- form max. temp.
moisture	54-61%
application(s)	LPLC: suitable
loss	~55% loss on drying
matrix	styrene-divinylbenzene (macroreticular)
matrix active group	dimethylethanolamine functional group
particle size	530-800 µm
operating pH	0 - 14
capacity	1.0 meq/mL by wetted bed volume
separation technique	anion exchange

pictograms	GHS07
signalword	Warning
hcodes	H315 - H319
pcodes	P302 + P352 - P305 + P351 + P338
Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Amberlite® IRA958 is a strongly basic polyacrylic anion exchange resin.

Подробнее

Amberlite® IRA958 chloride form

CAS Number:	79620-27-2
MDL number:	MFCD00211600
NACRES:	SB.52

Acrylic resin for decolorization and the removal of organic material
Amberlite® IRA958 chloride form may be used as an ion exchange resin for the adsorption of Acid Orange 7, and sorption as well as separation of iminodiacetate rare earth element(III) complexes from aqueous solutions. Amberlite IRA958 may be used as an anion exchanger for the removal of natural organic matter (NOM) from drinking water supplies and palladium(II) from acidic solutions.
Strongly basic (type I) anion exchange resin for organic scavenging from surface water. Useful for decolorizing sugar juices and cane syrups, citric acid purification, and capturing metal complexes. The high porosity of the macroreticular structure makes it more resistant to organic fouling when compared to acrylic gel resins.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

description	strongly basic
form	beads
parameter	79 °C Cl^- form max. temp.
moisture	66-72%
application(s)	LPLC: suitable
loss	~70% loss on drying, 110 °C
matrix	acrylic copolymer (macroreticular)
matrix active group	quaternary ammonium functional group
particle size	13-45 mesh
operating pH	0 - 14
capacity	0.8 meq/mL by wetted bed volume(Cl- form)
bulk density	45 lb/cu.ft
separation technique	anion exchange

648,00 евро / 60 935 руб.

Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Amberlite IR120 is a gel-type strongly acidic cation exchange resin and a heterogeneous catalyst.

Подробнее

Amberlite® IRC120 H, hydrogen form

CAS Number:	39389-20-3
MDL number:	MFCD00132707
NACRES:	SB.52

Strongly acidic cation exchange resin suitable for a wide variety of chemical process applications, removal of amino acids at low pH, USP potassium methods, etc..
Amberlite IR120 has been used as a catalyst support to form chelates with Co2+ or Ru3+ ions for subsequent hydrogen generation by hydrolysis of ammonia borane. It may be used as a catalyst for the oxirane ring-opening reaction effected by hydrogen peroxide (H2O2) during the synthesis of epoxides from triglycerides source. Amberlite IR120 hydrogen form may be used to investigate the ion-exchange equilibria of H+/Pb2+, H+/Ni2+, and H+/Cr3+ systems.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

vapor density	>1 (vs air)
vapor pressure	17 mmHg ( 20 °C)
form	beads
autoignition temp.	800 °F
parameter	121 °C max. temp.
cross-linkage	8%
moisture	53-58%
application(s)	LPLC: suitable
loss	~50% loss on drying, 110 °C
matrix	styrene-divinylbenzene (gel)
matrix active group	sulfonic acid
particle size	620-830 µm
operating pH	0 - 14
capacity	1.8 meq/mL by wetted bed volume
separation technique	cation exchange
InChI	1S/C10H10.C8H8O3S/c1-3-9-7-5-6-8-10(9)4-2;1-2-7-5-3-4-6-8(7)12(9,10)11/h3-8H,1-2H2;2-6H,1H2,(H,9,10,11)
InChI key	SIWVGXQOXWGJCI-UHFFFAOYSA-N

Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Подробнее

Amberlite® IRN78 OH hydroxide form 10343-U

CAS Number:	11128-95-3
NACRES:	SB.52

Amberlite IRN78, strong base anion exchange gel type polystyrene resin in hydroxide form, has quaternary ammonium functional group.
As a nuclear grade resin, a minimum of 95% of the available exchange sites are in the hydroxide form.

Amberlite IRN78 hydroxide form was used as packing bed in vertical column chromatography.
Strongly basic (type I) anion exchange resin for water treatment, RADwaste, decontamination, etc.; useful for boron thermal regeneration.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
grade	nuclear grade
form	beads
packaging	bucket of 500 g
parameter	60 °C OH^- form max. temp.
cross-linkage	8%
moisture	54-60%
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (gel)
matrix active group	trimethylammonium
particle size	580-680 µm
operating pH	0 - 14
capacity	1.1 meq/mL by wetted bed volume
separation technique	anion exchange

pictograms	GHS07
signalword	Warning
hcodes	H319
pcodes	P305 + P351 + P338
Personal Protective Equipment	Eyeshields, Gloves, type ABEK (EN14387) respirator filter
RIDADR	NONH for all modes of transport
WGK Germany	3

Dowex MAC-3 contains carboxylic acid as functional group and is selective for Cu and Fe. The resin has larger exchange capacity and large particle size.

Подробнее

AmberLite® MAC-3 H Cation Exchange Resin

CAS Number:	9052-45-3
MDL number:	MFCD03098973
NACRES:	SB.52

Dowex MAC-3 was used in the separation and pre-concentration of metal ions in alcohol. It was also used as packaging material in chromatographic columns for purification.
Weakly acidic cation exchanger for water treatment, dealkalization, purification of antibiotics, pharmaceuticals and amino acids, etc. The macroporous matrix gives the resin good resistance to osmotic shock, while maintaining a high regeneration efficiency.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

form	beads
parameter	120 °C max. temp.
moisture	44-52%
application(s)	LPLC: suitable
matrix	acrylic polymer (macroporous)
matrix active group	carboxylic acid
particle size	12-50 mesh, 300-1200 µm
operating pH	4 - 14
capacity	3.8 meq/mL by wetted bed volume
separation technique	cation exchange
InChI	1S/C10H10.C3H4O2/c1-3-9-7-5-6-8-10(9)4-2;1-2-3(4)5/h3-8H,1-2H2;2H,1H2,(H,4,5)
InChI key	TXDYWJDYXZCRAN-UHFFFAOYSA-N

pictograms	GHS07
signalword	Warning
hcodes	H319
pcodes	P305 + P351 + P338
Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Amberlite® MB-20 may be used for the removal of ions from aqueous solutions. Uses include primary water chemistry control in once-through systems, ultrapure water production, condensate polishing, in-process and column demineralization, and removal of ionic detergents (such as SDS) from protein samples.

Подробнее

Amberlite® MB-20

MDL number:	MFCD03791384
NACRES:	SB.52

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	beads
quality	mixed bed ion exchange resin, regenerated
application(s)	LPLC: suitable
loss	~60% loss on drying, 110°C
matrix	PS-DVB
matrix active group	mixed mode
particle size	20-50 mesh
separation technique	mixed mode

pictograms	GHS05
signalword	Danger
hcodes	H318
pcodes	P280 - P305 + P351 + P338 + P310
Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Подробнее

Amberlite® MB-9L

MDL number:	MFCD03791385
NACRES:	SB.52

Quality Level	100
form	beads
quality	cannot be regenerated, mixed bed ion exchange resin (without indicator)
application(s)	LPLC: suitable
loss	~60% loss on drying, 110°C
matrix	PS-DVB
matrix active group	mixed mode
particle size	20-50 mesh
separation technique	mixed mode

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Подробнее

AmberLite® MB20 H/OH Mixed Bed Ion Exchange Resin hydrogen and hydroxide form 13687-U

MDL number:	MFCD00166706
NACRES:	SB.52

Dowex® Marathon™ MR-3 hydrogen and hydroxide form was used in assessing inorganic nitrogen in litter layer and soil using ion-exchange resin bags on Alpkem autoanalyzer and by ion chromatography.
Mixed bed ion exchange resin specially processed resin for condensate polishing; best for in-process and column demineralization.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Marathon is a trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
description	formerly Dowex^® Marathon^™ MR-3 H/OH
form	beads
packaging	bucket of 1000 g
parameter	60 °C max. temp.
moisture	46-51% (cation exchanger), 60-72% (anion exchanger)
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (gel)
matrix active group	mixed mode
particle size	560-660 µm (anion form), 710-810 µm (cation form)
operating pH	0 - 14
capacity	1.0 meq/mL by wetted bed volume(anion), 1.9 meq/mL by wetted bed volume
separation technique	mixed mode

Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
WGK Germany	3

Подробнее

AmberLite® MB20 H/OH Mixed Bed Ion Exchange Resin hydrogen and hydroxide form 13686-U

MDL number:	MFCD00166706
NACRES:	SB.52

Mixed bed ion exchange resin specially processed resin for condensate polishing; best for in-process and column demineralization.

Quality Level	100
description	formerly Dowex^® Marathon^™ MR-3 H/OH
form	beads
packaging	bottle of 100 g
parameter	60 °C max. temp.
moisture	46-51% (cation exchanger), 60-72% (anion exchanger)
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (gel)
matrix active group	mixed mode
particle size	560-660 µm (anion form), 710-810 µm (cation form)
operating pH	0 - 14
capacity	1.0 meq/mL by wetted bed volume(anion), 1.9 meq/mL by wetted bed volume
separation technique	mixed mode

Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
WGK Germany	3

Dowex Marathon MR-3 is a premium, premixed, mixed bed product designed for polishing demineralized water to conductivities <0.1 μS/cm. Marathon MR-3 is a 1:1 equivalent mixture of Marathon C-10 (H) and Marathon A (OH)

Подробнее

AmberLite® MB20 Mixed Ion Exchange Resin

MDL number:	MFCD00166706
NACRES:	SB.52

1 kg in poly bottle
100, 500 g in poly bottle

Uniform size beads offer higher surface area for increased capacity and faster kinetics. Nuclear grade, gel form, styrene-divinylbenzene copolymer matrix

The Dowex® Marathon™ MR-3 is a superior resin to the Dowex MR-3. The Dowex Marathon series provides narrower particle Distribution, better efficiency, and improved kinetics when compared to the gaussian Dowex products.
This ion-exchange resin has not been specially processed nor cleaned. We suggest that it be treated to a suitable preliminary elution and wash.

Quality Level	100
description	formerly Dowex^® Marathon^™ MR-3 H/OH
form	beads
composition	HCR-S[H⁺] and SBR[OH^-]: in accordance
parameter	60 °C max. temp.
moisture	46-51% (cation exchanger), 60-72% (anion exchanger)
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (gel)
matrix active group	mixed mode
particle size	20-50 mesh, 560-660 µm (anion form), 710-810 µm (cation form)
operating pH	0 - 14
capacity	1.0 meq/mL by wetted bed volume(anion), 1.9 meq/mL by wetted bed volume
separation technique	mixed mode

pictograms	GHS07
signalword	Warning
hcodes	H315 - H319 - H335
pcodes	P261 - P264 - P271 - P280 - P302 + P352 - P305 + P351 + P338
Target Organs	Respiratory system
Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.

Подробнее

Amberlite® XAD1180N

CAS Number:	97396-56-0
MDL number:	MFCD00145830
NACRES:	SB.52

Polymeric adsorbent for hydrophobic compounds: antibiotics, vitamins, amino acids, enzymes; for purification: gallium, myxovirescins, phosphoric acid, riboflavin salts.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

application(s)	LPLC: suitable
loss	~65% loss on drying, 110 °C
matrix	styrene/divinylbenzene
matrix active group	polymer
particle size	20-60 mesh, 350-600 µm
pore size	1.4 mL/g pore volume, 300-400 mean pore size
surface area	450 m²/g
separation technique	reversed phase

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 1
Flash Point F	Not applicable
Flash Point C	Not applicable

Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.

Подробнее

Amberlite® XAD16N

CAS Number:	9003-69-4
MDL number:	MFCD00145831
NACRES:	SB.52

Hydrophobic compounds up to 40,000 MW; antibiotics; pharmaceutical manufacturing; surfactants; bitters; separation of large organic molecules (especially proteins). More efficient than XAD2.

500 g in poly bottle
1 kg in poly bottle

Hydrophobic polyaromatic resin

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

form	beads
Quality Level	400
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene
matrix active group	polymer
particle size	20-60 mesh, 560-710 µm
pore size	~0.55 mL/g pore volume, 200 mean pore size
surface area	800 m²/g
separation technique	reversed phase

Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.

Подробнее

Amberlite® XAD4

CAS Number:	37380-42-0
MDL number:	MFCD00132704
NACRES:	SB.52

Polyaromatic adsorbent for small hydrophobic compounds, surfactants, pharmaceutical manufacturing, phenols, chlorinated organics, pesticide removal and recovery, and organic removal from aqueous food streams.

500 g in poly bottle
1 kg in poly bottle

Hydrophobic polyaromatic resin
Two particle sizes are available:
Mesh 20-60 are Cat. Nos. 20276, 10358, XAD4
Mesh 20-50 is Cat. No. 06444

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	beads
autoignition temp.	800 °F
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene
matrix active group	polymer
particle size	20-60 mesh
pore size	~0.98 mL/g pore volume, 100 mean pore size
surface area	750 m²/g
density	1.02 g/mL (true wet)(lit.), 1.08 g/mL (skeletal)(lit.)
separation technique	reversed phase

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Подробнее

Amberlite® XAD4 20276

CAS Number:	37380-42-0
MDL number:	MFCD00132704

Amberlite XAD4 is a nonpolar absorbent used for stripping and concentration of organic compounds. Bacillus subtilis immobilized on Amberlite XAD-4 has been investigated as new biosorbent in trace metal determination.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.

Amberlite® XAD4 was used in rapid fractionation technique.
Amberlite XAD4 was used as sorbent for HPLC analysis.

Two particle sizes are available:
Mesh 20-60 are Cat. Nos. 20276, 10358, XAD4
Mesh 20-50 is Cat. No. 06444

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	solid
autoignition temp.	800 °F
packaging	pkg of 100 g
application(s)	HPLC: suitable, LPLC: suitable
matrix	styrene-divinylbenzene
matrix active group	polymer
particle size	20-60 mesh
pore size	~0.98 mL/g pore volume, 100 mean pore size
surface area	750 m²/g
density	1.02 g/mL (true wet)(lit.), 1.08 g/mL (skeletal)(lit.)
separation technique	reversed phase

210,49 евро / 19 794 руб.

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Подробнее

Amberlite® XAD4 10358

CAS Number:	37380-42-0
MDL number:	MFCD00132704

Amberlite XAD4, a nonpolar absorbent, used for stripping and concentration of organic compounds. It is also used in developing chelating ligands due to its properties like, porosity, high surface area, purity and durability.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.

Amberlite® XAD4 was used:

in rapid fractionation technique
as sorbent for HPLC analysis

Two particle sizes are available:
Mesh 20-60 are Cat. Nos. 20276, 10358, XAD4
Mesh 20-50 is Cat. No. 06444

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	solid
autoignition temp.	800 °F
packaging	pkg of 500 g
application(s)	HPLC: suitable, LPLC: suitable
matrix	styrene-divinylbenzene
matrix active group	polymer
particle size	20-60 mesh
pore size	~0.98 mL/g pore volume, 100 mean pore size
surface area	750 m²/g
density	1.02 g/mL (true wet)(lit.), 1.08 g/mL (skeletal)(lit.)
separation technique	reversed phase

4 833,21 евро / 454 497 руб.

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.

Подробнее

Amberlite® XAD7HP

MDL number:	MFCD00132705
NACRES:	SB.52

Weakly polar adsorbent resin for compounds up to 60,000 MW: insulin, fulvic and humic compounds, dry waste, organic removal and recovery, and antibiotic recovery.

1 kg in poly bottle
100, 500 g in poly bottle

Moderately polar acrylic resin
Two particle sizes are available:
Mesh 20-60 is Cat. No. XAD7
Mesh 20-50 is Cat. No. 06445

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
vapor density	<1 (vs air)
vapor pressure	17 mmHg ( 20 °C)
form	beads
autoignition temp.	800 °F
application(s)	LPLC: suitable
matrix	acrylic
matrix active group	polymer
particle size	20-60 mesh, 560-710 µm
pore size	0.5 mL/g pore volume, 300-400 mean pore size
surface area	380 m²/g
separation technique	reversed phase

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Подробнее

Amberlite® XAD®-2 10357

CAS Number:

9003-70-7

Amberlite XAD-2, a hydrophobic copolymer of styrene-divinylbenzene resin, requires longer purification process and is used as a sorbent. Amberlite XAD-2 resin depending upon the aromaticity and size of the hydrophobic groups sorbs organic compounds through low-energy physical interactions.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.
Specifications:

Amberlite® XAD®-2 was used:

as adsorbent in the extraction of organochlorine compounds using Soxhlat extraction technique
as adsorbent in the extraction of honey samples using column chromatography for HPLC analysis
in adsorption chromatography

Polyaromatic adsorbent resin for hydrophobic compounds up to MW 20,000: phenols, organic removal, surfactants, aroma compounds, antibiotic recovery. May be used as support for catalyst or metals removal. For cleaned US EPA versions, see Supelpak-2 and Supelpak-2B.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
XAD is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	beads (small)
packaging	pkg of 500 g
application(s)	HPLC: suitable, LPLC: suitable
matrix	styrene-divinylbenzene (macroreticular)
matrix active group	polymer
particle size	20-60 mesh
pore size	~0.65 mL/g pore volume, 90 mean pore size
surface area	~300 m²/g
density	1.02 g/mL at 25 °C (true wet)(lit.), 1.08 g/mL at 25 °C (skeletal)(lit.)
separation technique	reversed phase
storage temp.	2-8°C

348,75 евро / 32 795 руб.

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Подробнее

Amberlite® XAD®-2 3025-U

CAS Number:	9003-70-7
NACRES:	SB.52

Amberlite XAD-2, a hydrophobic copolymer of styrene-divinylbenzene resin which requires longer purification process and is used as a sorbent. Amberlite XAD-2 resin depending upon the aromaticity and size of the hydrophobic groups sorbs organic compounds through low-energy physical interactions.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.
Specifications:

Amberlite® XAD®-2 was used:

as adsorbent in the extraction of organochlorine compounds using Soxhlat extraction technique
as adsorbent in the extraction of honey samples using column chromatography for HPLC analysis
in adsorption chromatography

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
XAD is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	solid
packaging	pkg of 25 kg
application(s)	HPLC: suitable, LPLC: suitable, ion chromatography: suitable
matrix	styrene-divinylbenzene (macroreticular)
matrix active group	polymer
particle size	20-60 mesh
pore size	~0.65 mL/g pore volume, 90 mean pore size
surface area	~300 m²/g
density	1.02 g/mL at 25 °C (true wet)(lit.), 1.08 g/mL at 25 °C (skeletal)(lit.)
separation technique	reversed phase

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	3

Подробнее

Amberlite® XAD®-2 20275

CAS Number:

9003-70-7

Amberlite XAD-2, a hydrophobic copolymer of styrene-divinylbenzene resin, requires longer purification process and is commonly used as a sorbent. Amberlite XAD-2 resin sorbs organic compounds depending upon the aromaticity and size of the hydrophobic groups through low-energy physical interactions.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.
Specifications:

Amberlite® XAD®-2 was used as adsorbent in the extraction of organochlorine compounds using Soxhlat extraction technique.
Amberlite® XAD®-2 was used as adsorbent in the extraction of honey samples using column chromatography for HPLC analysis.
Amberlite® XAD®-2 was used in adsorption chromatography.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
XAD is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	solid
packaging	pkg of 100 g
application(s)	HPLC: suitable, LPLC: suitable
matrix	styrene-divinylbenzene (macroreticular)
matrix active group	polymer
particle size	20-60 mesh
pore size	~0.65 mL/g pore volume, 90 mean pore size
surface area	~300 m²/g
density	1.02 g/mL at 25 °C (true wet)(lit.), 1.08 g/mL at 25 °C (skeletal)(lit.)
separation technique	reversed phase
storage temp.	2-8°C

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Подробнее

Amberlite® XAD®-2 52672-U

CAS Number:	9003-70-7
NACRES:	SB.52

Amberlite® XAD®-2 was used:

as adsorbent in the extraction of organochlorine compounds using Soxhlat extraction technique
as adsorbent in the extraction of honey samples using column chromatography for HPLC analysis
in adsorption chromatography

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
XAD is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

form	solid
packaging	pkg of 10 kg
application(s)	HPLC: suitable, LPLC: suitable
matrix	styrene-divinylbenzene (macroreticular)
matrix active group	polymer
particle size	20-60 mesh
pore size	~0.65 mL/g pore volume, 90 mean pore size
surface area	~300 m²/g
density	1.02 g/mL at 25 °C (true wet)(lit.), 1.08 g/mL at 25 °C (skeletal)(lit.)
separation technique	reversed phase

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	3

Подробнее

Amberlite® XAD®-2 SU853005

CAS Number:	9003-70-7
NACRES:	SB.52

Amberlite® XAD®-2 is a strongly acidic ion-exchange resin.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.
Specifications:

Amberlite® XAD®-2 may be used as a stationary phase material for the solid phase extraction (SPE) of phenolic acids and flavonols from honey samples prior to their identification by high performance liquid chromatography-diode array detection (HPLC-DAD), phthalate esters (PAEs) from hydroalcoholic food beverages prior to their determination by gas chromatography (GC) equipped with flame ionization detector (FID) as well as ion-trap mass spectrometry detector (IT/MS), benzoic and sorbic acids in quince jam prior to their analysis by isocratic HPLC combined with photodiode array (PDA) detector and organophosphorus pesticides in natural and drinking waters prior to their determination by GC-FID or GC coupled to nitrogen-phosphorus detector (NPD).
Polyaromatic adsorbent resin for hydrophobic compounds up to MW 20,000: phenols, organic removal, surfactants, aroma compounds, antibiotic recovery. May be used as support for catalyst or metals removal. For cleaned US EPA versions, see Supelpak-2 and Supelpak-2B.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
XAD is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	solid
packaging	pkg of 5 kg
application(s)	LPLC: suitable, solid phase extraction (SPE): suitable
matrix	styrene-divinylbenzene (macroreticular)
matrix active group	polymer
particle size	20-60 mesh
pore size	~0.65 mL/g pore volume, 90 mean pore size
surface area	~300 m²/g
density	1.02 g/mL at 25 °C (true wet)(lit.), 1.08 g/mL at 25 °C (skeletal)(lit.)
separation technique	reversed phase

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

It is a macro reticular polystyrene based ion exchange resin with strongly acidic sulfonic group. It serves as an excellent source of strong acid. It can also be used several times. Amberlyst 15 is a heat sensitive macro-porous sulfonic ion exchange acid resin which could be used as a catalyst.

Подробнее

Amberlyst® 15 hydrogen form

CAS Number:	39389-20-3
MDL number:	MFCD00145841
NACRES:	SB.52

Strongly acidic cation exchange resin used as a heterogeneous acid catalysis; suitable for non-aqueous catalysis.
Amberlite® 15 may be used as column packing material for HPLC analysis. Amberlite® 15 hydrogen form may be used in separation media for TLC, paper and LPL chromatography.

25, 500 g in poly bottle
2.5 kg in poly bottle

Chem/Phys Resistance

Swelling (dry to solvent saturated, %):
hexane 10-15; toluene 10-15; ethylene dichloride 15-20; ethylene acetate 30-40; 95% ethylene alcohol 60-70; water 60-70.

Amberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Amberlyst is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	beads
quality	wet
parameter	120 °C max. temp.
moisture	1.6%
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (macroreticular)
matrix active group	sulfonic acid functional group
particle size	<300 µm
operating pH	0 - 14
capacity	1.7 meq/mL by wetted bed volume, 4.7 meq/g by dry weight
separation technique	cation exchange
InChI	1S/C10H10.C8H8O3S/c1-3-9-7-5-6-8-10(9)4-2;1-2-7-5-3-4-6-8(7)12(9,10)11/h3-8H,1-2H2;2-6H,1H2,(H,9,10,11)
InChI key	SIWVGXQOXWGJCI-UHFFFAOYSA-N

Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

especially for heterogeneous catalysis, with more resistance to thermal degradation

Подробнее

Amberlyst® 16 wet

CAS Number:	125004-35-5
MDL number:	MFCD03791386
NACRES:	SB.52

Amberlyst is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	beads
crosslinking	12 % cross-linked
application(s)	LPLC: suitable
loss	~50% loss on drying, 110°C
matrix	styrene divinylbenzene (macroporous)
matrix active group	sulfonic acid functional group
particle size	~700 µm
capacity	4.8 meq/g
separation technique	cation exchange

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Shrinkage:
Water to phenol: 45%
Water to dry: 54%

Подробнее

Amberlyst® 36

CAS Number:	39389-20-3
MDL number:	MFCD00145841
NACRES:	SB.52

Amberlyst is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	beads
crosslinking	12 % cross-linked
contains	51-57% Moisture content (H+ form)
composition	water, 55%
application(s)	LPLC: suitable
surface area	33 m²/g
matrix	styrene divinylbenzene (macroporous)
matrix active group	sulfonic acid functional group
particle size	<0.425 mm (0.5% max), 0.600-0.850 mm (uniformity coefficient: <1.6), >1.180 mm (4.0% max)
pore size	0.20 mL/g total pore volume, 240 average pore diameter
capacity	>1.95 eq/L exchange capacity, >5.40 meq/g exchange capacity
density	1.2 g/mL at 25 °C (lit.)
separation technique	cation exchange
InChI	1S/C10H10.C8H8O3S/c1-3-9-7-5-6-8-10(9)4-2;1-2-7-5-3-4-6-8(7)12(9,10)11/h3-8H,1-2H2;2-6H,1H2,(H,9,10,11)
InChI key	SIWVGXQOXWGJCI-UHFFFAOYSA-N

Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Amberlyst A21 is a neutral ion-exchange resin and a solid base which catalyses three-component reaction of aldehyde and malononitrile with various active methylene compounds to synthesize a range of pyran annulated heterocycles. Use of the solid base is to generate a highly green protocol by eliminating chromatographic purification involving hazardous organic solvents, and for easy recovery and reusability of the catalyst. Amberlyst A21 is used as a fluid bed resin. Fluid bed reactor allows gel-type beads, of polymer-supported (PS) organic reactions, to be used in a flow system. The Michael reaction between methyl 1-oxoindan-2-carboxylate and methyl vinyl ketone in toluene can be attained through a fluid bed of Amberlyst A21 at 50°C.

Подробнее

Amberlyst® A21 free base

MDL number:	MFCD00145842
NACRES:	SB.52

Amberlyst® A21 free base was used in catalyst preparation.

5, 250 g in poly bottle
1 kg in poly bottle

Weakly basic, macroreticular resin with alkyl amine functionality.

Amberlyst is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
vapor density	<1 (vs air)
vapor pressure	17 mmHg ( 20 °C)
form	beads
autoignition temp.	800 °F
moisture	56-62%
application(s)	LPLC: suitable
matrix	styrene divinylbenzene (macroporous)
matrix active group	dimethylamino
particle size	22-30 mesh, 490-690 µm
capacity	1.3 meq/mL by wetted bed volume
separation technique	anion exchange

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Strongly basic (type I) anion exchange resin used to remove transition metal complexes and mercaptans from hydrocarbons, remove acids from non-polar solvents, and deacidifying phenol-acetone solutions. Its porous structure makes it a good polymeric catalyst in non-aqueous and aqueous media; it has no pH limitations.
Amberlyst® A26 hydroxide form is a strongly basic, macroreticular resin with quaternary ammonium functionality used to catalyze aldol condensation, also useful in aqueous and nonaqueous media to remove anionic transition metal complexes, mercaptans and acids from hydrocarbons and other nonpolar solvents. It was used to determine cadmium using flow injection atomic absorption spectrometry. It was also used as packaging material for column chromatography assay.

Подробнее

Amberlyst® A26 hydroxide form

CAS Number:	39339-85-0
MDL number:	MFCD03096474
NACRES:	SB.52

100 g in poly bottle
1 kg in poly bottle

Inert in strong acids, concentrated aldalies, aliphatic and aromatic hydrocarbons, alcohols, ethers, and other common solvents.
Maximum operating temperature 60C.

Amberlyst is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	beads
concentration	1 N in NaOH (Regenerant concentration)
parameter	60 °C OH^- form max. temp.
moisture	66-75%
application(s)	LPLC: suitable
bed D	24 in.
impurities	45-65% (moisture)
matrix	styrene-divinylbenzene (macroreticular)
matrix active group	quaternary ammonium functional group
particle size	16-45 mesh, 560-700 µm
pore size	0.30 mL/g pore volume, 400 mean pore size
surface area	~30 m²/g
capacity	0.8 meq/mL by wetted bed volume
bulk density	41 lb/cu.ft
separation technique	anion exchange

Personal Protective Equipment	Eyeshields, Gloves, multi-purpose combination respirator cartridge (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Amphoteric properties of Dowex Retardion 11A8 allows specific isolation of elements from complex mixtures which generally is possible with use of monofunctional ion exchangers. Determination of trace amounts of Zinc and Cadmium by radiochemical NAA was performed using Retardion 11A8.
The Retardion 11A8 is not a true mixed bed resin, but a resin with mixed functionality. It contains paired anion and cation exchange sites (each exists as the other′s counter-ion) that adsorb mobile ions from a bulk stream.

Подробнее

AmberSep® (formerly Dowex®) Retardion 11A8

CAS Number:	68955-09-9
MDL number:	MFCD00163521
NACRES:	SB.52

Dowex Retardion 11A8 was used in solid phase extraction for determination of total concentrations by flame atomic absorption spectrometry.
Chromatographic resin for ion separation. Useful for removal of ionic detergents (e.g., SDS) from protein samples. It is used for the removal of electrolytes from water solutions, and separation of cations from anions. Desalting occurs by SEC-type mechanism, so column use is recommended for best success.

100, 500 g in poly bottle

Physical form

Mixed bed

This ion-exchange resin has not been specially processed nor cleaned. We suggest that it be treated to a suitable preliminary elution and wash.

Ambersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
description	amphoteric form
form	beads
parameter	70 °C max. temp.
moisture	43-48%
application(s)	LPLC: suitable
color	deep yellow, tan
matrix	amphoteric styrene-divinylbenzene (gel)
matrix active group	mixed mode
particle size	50-100 mesh
operating pH	0 - 14
capacity	0.7 meq/mL by wetted bed volume
separation technique	mixed mode

pictograms	GHS07
signalword	Warning
hcodes	H315 - H319 - H335
pcodes	P302 + P352 - P305 + P351 + P338
Target Organs	Respiratory system
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

This is mining grade material, and does NOT meet FDA 21 CFR 173.25. For information on the Dowex 21K XLT resin, contact techservice@sial.com.

Подробнее

AMBERSEP® 21K XLT Mesh Anion Exchange Resin (Cl-)

CAS Number:	60177-39-1
MDL number:	MFCD00145586
PubChem Substance ID:	24866990
NACRES:	SB.52

This ion-exchange resin has not been specially processed nor cleaned. We suggest that it be treated with a suitable preliminary elution and wash.

Ambersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	beads
crosslinking	<10 % cross-linked
moisture	50-58%
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (gel)
matrix active group	trimethylamine
particle size	525-625 µm
capacity	1.2 meq/mL by wetted bed volume
separation technique	anion exchange

RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Stongly basic (type I) anion exchange resin.

Подробнее

Ambersep® 900 hydroxide form

CAS Number:	9017-79-2
MDL number:	MFCD00802695
NACRES:	SB.52

Ambersep 900 hydroxide resin has been used for the selective removal of chlorophyll from natural extracts with a high phytochemical content. It may be used as a catalyst for the synthesis of glycerol carbonate by using glycerol and dimethyl carbonate reactants.

Ambersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

form	beads
moisture	64%
application(s)	LPLC: suitable
loss	~75% loss on drying, 110 °C
matrix	styrene/divinylbenzene
matrix active group	quaternary ammonium
particle size	20-50 mesh
capacity	0.8 meq/mL by wetted bed volume
separation technique	anion exchange

Personal Protective Equipment	Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

Подробнее

Ambersep® M4195 Chelating Anion Exchange Resin sulfate 13727-U

NACRES:

SB.52

Dowex® M4195, a weakly basic solid supported polyamine chelating anion exchange resin, acts as an effective adsorbent for nickel and cobalt even in low pH.

Chelating resin for the removal of cobalt, copper, nickel; metal recovery; mining; general hydrometallurgy.

Dowex® M4195 was used in removal of heavy metals from water using UV-VIS spectrophotometery.
Dowex M4195 was used to purify the Cu2+ from oligosaccharide and was checked by coulometry.
Dowex M4195 was used in the preparation of Cu-supported calatyst Dw-BPMA-Cu+.

Ambersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
description	replaces Dowex^® M4195
form	beads
packaging	jar of 100 g
parameter	60 °C max. temp.
moisture	40-60%
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (macroporous)
matrix active group	bis-picolylamine functional group
particle size	20-50 mesh
operating pH	0 - 7
capacity	33 g/L(copper)
compatibility	mode of use chelating resin
separation technique	affinity

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
WGK Germany	3

Подробнее

Ambersep® M4195 Chelating Anion Exchange Resin sulfate 13728-U

NACRES:

SB.52

Dowex® M4195, a weakly basic solid supported polyamine chelating anion exchange resin, acts as an effective adsorbent for nickel and cobalt even in low pH.

Chelating resin for the removal of cobalt, copper, nickel; metal recovery; mining; general hydrometallurgy.

Dowex® M4195 was used in removal of heavy metals from water using UV-VIS spectro photometer.
Dowex M4195 was used to purify the Cu2+ from oligosaccharide and was checked by coulometry.
Dowex M4195 was used in the preparation of Cu-supported calatyst Dw-BPMA-Cu+.

Ambersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
description	replaces Dowex^® M4195
form	beads
packaging	pkg of 500 g
parameter	60 °C max. temp.
moisture	40-60%
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (macroporous)
matrix active group	bis-picolylamine functional group
particle size	20-50 mesh
operating pH	0 - 7
capacity	33 g/L(copper)
compatibility	mode of use chelating resin
separation technique	affinity

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
WGK Germany	3

Подробнее

Ambersep® M4195 Chelating Anion Exchange Resin sulfate 13729-U

NACRES:

SB.52

Dowex® M4195, a weakly basic solid supported polyamine chelating anion exchange resin, acts as an effective adsorbent for nickel and cobalt even in low pH.

Chelating resin for the removal of cobalt, copper, nickel; metal recovery; mining; general hydrometallurgy.

Dowex® M4195 was used in removal of heavy metals from water using UV-VIS spectro photometer.
Dowex M4195 was used to purify the Cu2+ from oligosaccharide and was checked by coulometry.
Dowex M4195 was used in the preparation of Cu-supported calatyst Dw-BPMA-Cu+.

Ambersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
description	replaces Dowex^® M4195
form	beads
packaging	pkg of 1000 g
parameter	60 °C max. temp.
moisture	40-60%
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (macroporous)
matrix active group	bis-picolylamine functional group
particle size	20-50 mesh
operating pH	0 - 7
capacity	33 g/L(copper)
compatibility	mode of use chelating resin
separation technique	anion exchange

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
WGK Germany	3

100, 500 g in poly bottle

Подробнее

AmberSep® OPTIPORE L-493 Polymeric Adsorbent

CAS Number:	69011-14-9
NACRES:	SB.52

Polyaromatic adsorbent for the concentration of organics from water; considered a better option than carbon.

Hydrophobic adsorbent with non-catalytic activity
High capacity for organic compounds
Macroporous beads with good mechanical strength

Ambersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

Quality Level	100
form	beads
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene (macroporous)
matrix active group	polymer
particle size	20-50 mesh
pore size	1.16 mL/g pore volume, 46 mean pore size
surface area	1100 m²/g
bulk density	680 g/L (19.0 kg/cuft)
separation technique	mixed mode

Personal Protective Equipment	Eyeshields, Gloves, type N95 (US)
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point F	Not applicable
Flash Point C	Not applicable

DOWEX MONOSPHERE 550A UPW (OH) type 1 strong base anion exchange resin is recommended for the roughing, intermediate and polishing ion exchange applications. Low TOC levels in the UPW grade are achieved by deliberate functionalization and rinsing. UPW grade is characterized by its light color, superior crush strength, and high (greater than 95%) conversion of exchange sites to the hydroxide (OH) form.

Подробнее

AmberTec™ UP550 OH Anion Exchange Resin

Footnote

Note - Dowex Monosphere 550A UPW OH is now AmberTec UP550 OH, a brand of Dupont

AmberTec is a trademark of E. I. du Pont de Nemours and Company
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Monosphere is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

description	Trimethylamine functionalised copolymer of styrene and divinylbenzene in the hydroxide form (CAS No. 69011-18-3; Water (CAS No. 7732-18-5), formerly Dowex^® Monosphere^® 550A UPW OH
form	beads
packaging	pkg of 1 kg (14016-U), pkg of 100 g (14015-U), pkg of 20 kg (14019-U), pkg of 5 kg (14018-U)
Торговая марка	Du Pont AmberTec^™
parameter	60 °C max. temp.
application(s)	LPLC: suitable
matrix	styrene-divinylbenzene
matrix active group	quaternary amine functional group
particle size	590 µm std dev ±50
operating pH	0 - 14
capacity	1.0 eq/L by wetted bed volume, 55-65 % water retention capacity ((OH))
separation technique	anion exchange

pictograms	GHS07
signalword	Warning
hcodes	H319
pcodes	P305 + P351 + P338
Personal Protective Equipment	dust mask type N95 (US), Eyeshields, Gloves
RIDADR	NONH for all modes of transport
WGK Germany	3

Amino-functionalized silica gel spherical is monodisperse in size and shape. It is prepared and characterized by thermogravimetery, X-ray diffraction, FT-IR, scanning electron microscopy (SEM) and N2 adsorption-desorption techniques.

Подробнее

Amino-functionalized silica gel spherical

CAS Number:	126850-14-4
NACRES:	SB.52

Quality Level	100
grade	high-purity grade
form	powder
composition	carbon content, 3.0% , nitrogen content, 1.0%
application(s)	LPLC: suitable
loss	~5% loss on drying
matrix	Silica
matrix active group	amino-functionalized silica
particle size	40-75 µm
pore size	110 A pore size
surface area	500 m²/g (approx.)
separation technique	hydrophilic interaction (HILIC)