Thermo Scientific Barnstead™ LabTower™ TII Water Purification System Barnstead... 50132141

Consistent water quality:

• Type 2 laboratory water meets ASTM Type II, CSLS-CLRW and ISO 3696 international standards.
• The LabTower is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity.

Compact mobile design:

• Three system options are available with permeate flows of 20, 40 or 60L/hr.
• Stand-alone design with integrated 100L reservoir takes up zero bench space.
• Castors allow easy relocation.
• Systems can be upgraded later to accommodate growing water demands.

Two ways to dispense water:

• Dispense directly from the system via the dispensing valve for calibration solutions, reagent preparation, filling of containers, general rinsing purposes, etc.
• Dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc.

Integrated 100L reservoir:

• Up to 100L of high purity water is ready for dispensing when needed.
• High purity polypropylene reservoir is opaque to light.
• Conical bottom allows complete emptying for efficient cleaning and disinfection.
• Adjustable setting for reservoir volume can be programmed for times when demand is low, allowing you to only store water that you can use.

Clear information on system display:

• The large four-line display is code-protected to prevent accidental changes in system settings.
• Illuminated and easily readable, the display provides information on resistivity or conductivity and operating mode status, such as “roduction”, “stand-by” or sanitization and volume of the reservoir in percent.

GLP-compliant documentation:

• LabTower TII has been developed to meet or exceed GLP requirements.
• Recorded and traceable data can be obtained by print-out via the RS-232 interface and accessory printer.
• Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.01 cm^-1 to an accuracy of ±0.1°C.

Pretreatment:

• 5?m prefilter and activated carbon in the combi-filter cartridge protect the RO membrane from free chlorine and particles.
• Hardness stabilizing cartridge protects the reverse osmosis stage from hard water.

Reverse osmosis and reservoir:

• Pretreated water is pressure-forced through the permeable reverse osmosis module removing 97- 99% of all inorganic ions and 99% of dissolved organic substances, as well as microorganisms and particles.
• The built-in 100L reservoir has a conical bottom outlet to optimize cleaning and sanitization.

Ion exchange and UV:

• RO membrane removes up to 99% of impurities. All remaining ions are removed by the low TOC, high-purity resins in the ion exchange cartridge.
• Irradiation with UV light (TII units with UV option only) eliminates any bacteria or germs that are present.

• Custom Group: Type 2 Water Purification Systems
• LeadTargetGroup: xx_ELMS
• Produktgroesse: -
• Search Display: Family
• Umbrella Brand: Thermo Scientific™
• Elektrischer Widerstand: 10 bis 1MWxcm
• Leitfaehigkeit: 0,1 Rate 1.0?S/cm
• Speisewasserquelle: funktions
• Flussrate.: 1.5L/min .
• Bakterieller Gehalt: < 1CFU/mL
• Partikel > 0,2 µm/ml: <1
• TOC-Monitor mit Ueberwachung der UV-Intensitaet: No
• Speisewasserueberwachung: No
• Speisewasseranschluss: 3/4 NPT
• Speisewasserdruck: 1-6 Bar
• Nettogewicht (metrisch): 66kg
• Betriebsdruck: 2 bis 6 bar
• Spannung: 100-240V
• Hertz: 50/60Hz
• Temperaturbereich (metrisch): 2 ° bis 35 ° C
• Bakterienretention: 99%
• Tiefe (metrisch): 580mm
• Bezeichnung: Barnstead LabTower TII (UV)
• Artikelbeschreibung: LabTower TII (UV) mit 40 3L/min Pumpe
• Permeatleistung: 40L/hr . bei 15 ° C
• Elektrische Anforderungen: 100-240V 50/60Hz
• Custom Group: Type 2 Water Purification Systems
• LeadTargetGroup: xx_ELMS
• Product Size: -
• Search Display: Family
• Umbrella Brand: Thermo Scientific™
• Resistivity: 10 to 1M?·cm
• Conductivity: 0.1 to 1.0μS/cm
• Feedwater Source: tap
• Flow Rate: 1.5L/min
• Bacterial Content: <1CFU/mL
• Particles >0.2µM/mL: <1
• TOC Monitor with UV Intensity Monitoring: No
• Feed Water Monitoring: No
• Feedwater Connector: 3/4 in. NPT
• Feedwater Pressure: 1-6 Bar
• Height (Metric): 1500mm
• Width (Metric): 450mm
• Net Weight (Metric): 66kg
• Operating Pressure: 2 to 6 bar
• Voltage: 100-240V
• Hertz: 50/60Hz
• Temperature Range (Metric): 2° to 35°C
• Bacterial retention: 99%
• Depth (Metric): 580mm
• Description: Barnstead LabTower TII (UV)
• Item Description: LabTower TII (UV) 40 with 3L/min pump
• Permeate performance: 40L/hr. at 15°C
• Electrical Requirements: 100-240V 50/60Hz