0563 4352 Testo testo 435-2 - Multifunction indoor air quality meter 0563 4352

PC software for analyzing and logging measuring data
Comprehensive range of measuring functions using optionally available accessories – e.g. anemometers, moisture sensors, lux and degree of turbulence sensors
Super-size memory for up to 10 000 readings
Displays dew point difference, min, max and mean values

Overview

The testo 435-2 indoor air quality meter is designed to allow you to carry out all the measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the quality of the indoor air.

But who knows better than you what your meter needs to be able to do? Below you will find a wide selection of optionally available probes and sensors that give you the freedom to configure your meter just the way you want it. Order your probes and sensors along with your meter now.

Connectable sensors (optional) for assessing the indoor air quality (IAQ)

• IAQ sensor for assessing the indoor air quality using CO2, air temperature, relative humidity and absolute pressure measurements
• Comfort sensor for degree of turbulence measurements in compliance with EN 13779 for the objective assessment of the air velocity in the relevant room
• Globe thermometer for measuring radiation heat
• Lux sensor for measuring illumination
• Moisture/temperature sensor for assessing the thermal comfort in the relevant room
• CO environmental sensor for measuring CO in rooms and buildings
• Temperature sensor for immersion, penetration, air and surface measurements
• Temperature sensors to determine the HTC value

Connectable sensors (optional) for checking and adjusting ventilation and air conditioning systems

• Thermal anemometer, also with integrated temperature and relative humidity measurement function for air velocity and volume flow rate measurements in ventilation ducts
• Impeller anemometer with small diameter (? 16mm) for air flow and volume flow rate measurements in ventilation ducts
• Impeller anemometer with large diameter (? 100mm) for air flow and volume flow rate measurements at air outlets in connection with the testovent 417 funnels also for carrying out measurements at disk valves and ventilation grilles or for carrying out measurements at ceiling diffusers using a volume flow rate rectifier
• Temperature sensor for immersion, penetration, air and surface measurements
• Moisture/temperature sensor for carrying out measurements in ventilation ducts
• Absolute pressure sensor

In addition to the other connectable sensors, you can also connect as many as three wireless sensors to your testo 435-2 IAQ meter: the optionally available wireless module allows you to carry out wireless temperature and moisture measurements via wireless sensors across distances of up to 20 meters out in the open. This helps to ensure that the cable is not damaged and that nothing gets in your way while measuring.

There is also a separate carry case available that provides you with plenty of room for both your meter and your selection of probes and sensors.

Complex technology that could hardly be more simple

The beauty behind the testo 435-2 indoor air quality meter is that the whole measuring process can be carried out quickly and efficiently with no need for complex programming.

Sensor dependent menus and selectable user profiles for typical applications like „duct measurements“ and „IAQ measurements“ ensure that the meter is always ready to use. The testo 435-2 has a super-size memory that can save up to 10.000 measurements, which can be transferred to your laptop or PC via the included USB cable. The included software allows you to log, archive and clearly structure all relevant measuring data and measuring programmes, for example duct measurements. Specially adapted measurement protocols can be used to present your customers with data from duct, long-term and degree of turbulence measurements. The optionally available testo fast printer can be used to provide your customers with on-the-spot protocol print outs.

The testo 453-2 has a large, easy-to-read backlit display that shows the dew point difference along with other values including min, max and mean values. A durable protective cover protects the testo 435-2 indoor air quality meter reliably against impact.

General technical data
Housing	ABS / TPE / Metal
Protection class	IP54
Warranty	2 years
Battery type	Alkali manganese, mignon, type AA
Battery life	200 h (typical vane measurement)
Display ligthing	Illuminated display
Storage temperature	-30 to +70 °C
Weight	428 g
Dimensions	220 x 74 x 46 mm
Operating temperature	-20 to +50 °C

Temperature - NTC
Measuring range	-50 to +150 °C
Accuracy	±0.2 °C (-25 to +74.9 °C) ±0.4 °C (-50 to -25.1 °C) ±0.4 °C (+75 to +99.9 °C) ±0.5 % of mv (Remaining Range)
Resolution	0.1 °C

Temperature - TC Type K (NiCr-Ni)
Measuring range	-200 to +1370 °C
Accuracy	±0.3 °C (-60 to +60 °C) ±(0.2 °C + 0.5 % of mv) (Remaining Range)
Resolution	0.1 °C

Temperature - TC Type T (Cu-CuNi)
Measuring range	-200 to +400 °C
Accuracy	±0.3 °C (-60 to +60 °C) ±(0.2 °C + 0.5 % of mv) (Remaining Range)
Resolution	0.1 °C

Humidity - Capacitive
Measuring range	0 to +100 %RH
Accuracy	See probe data

Absolute Pressure
Measuring range	0 to +2000 hPa
Accuracy	See probe data
Resolution	0.1 hPa

Velocity - Vane anemometer
Measuring range	0 to +60 m/s
Accuracy	See probe data
Resolution	0.01 m/s (60 + 100 mm Vane) 0.1 m/s (16 mm Vane)

Velocity - Hot wire anemometer
Measuring range	0 to +20 m/s
Accuracy	See probe data
Resolution	0.01 m/s

Ambient CO?

Light
Measuring range	0 to +100000 Lux
Accuracy	See probe data
Resolution	1 Lux 0.1 Hz

Ambient CO2 (via IAQ probe)

testo 435-2 indoor air quality meter including measured value memory, PC software, USB cable, calibration protocol, batteries.
PLEASE NOTE: A sensor (not included in the scope of supply) is required to operate the meter).

Technical data:
Вес нетто:	1,435 kg
EAN Code:	4029547004971