Elga MEDICA Pro RE 30, with Integral Reservoir      Analyzer... 211505

MEDICA Pro RE 30, with Integral Reservoir 

Analyzer Water System producing CLSI CLRW grade water.

Ideal for Pressurised feed to single or multiple analyzers.

Requiring consistent high purity water.

The MEDICA Pro analyzer water system is designed to feed individual or multiple clinical analyzers. It will deliver up to 4 liters per minute via a recirculation loop at 2 bar pressure. Make up rate is 30 liters per hour.

The purified water is recirculated via the integral variable speed pump to maintain a high quality water, which through its unique analyzer feed mechanism will  always deliver at a constant flow and pressure to the analyzers. A dispense tap, to allow water to be taken off for general laboratory use, may be fitted to the recirculation loop.

The system comprises: pre-treatment, RO module, E-Cartridge for CO2 reduction, integral reservoir, delivery/recirculation pump, deionisation, UV and 0.05 micron in-line filtration.                   

System Performance:

Inorganics: 10 -18 MW-cm

TOC (typical): <30ppb (subject to suitable feedwater)

Bacteria: <1CFU/ml

pH: effectively neutral

System Feedwater Requirements:

Source: Potable water

Maximum Fouling Index: 10

Maximum Conductivity: 1400mS-cm

Pressure (max): 3 bar (45psi)

Pressure (min): 2 bar (30psi)

Power: 220-240volts, 50Hz

The MEDICA Pro RE features include:

Protek high capacity adsorption pretreatment cartridge

Medpure long life deionization cartridge reduces exchange frequency and running costs

E-Cartridge for the reduction of CO2

Low bacterial specification – UV and microfiltration technologies together with recirculation and a simple sanitization regime keep bacterial contamination below <1 CFU/ml

Feedwater Air break

Emergency by-pass loop

Ident-No.:        211505

Part-No.:         MP030REM1-230 –