SYLGARD® 186 901142-5EA
2-part, 10:1 mix, translucent encapsulant with high tear strength. Dow Corning® silicone encapsulants are supplied as two-part liquid component kits. When liquid components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well suited for the protection of electrical/electronic applications. Dow Corning silicone encapsulants cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement. Dow Corning silicone elastomers require no post cure and can be placed in service immediately following the completion of the cure schedule. Standard silicone encapsulants require a surface treatment with a primer in addition to good cleaning for adhesion while primerless silicone encapsulants require only good cleaning.
SYLGARD® 186, a high tensile strength two-part silicone system, can be used in the formation of elastic substrates for potential usage in flexible electronics. It can be used in the fabrication of microcable neuroelectrodes for biomedical micro-electromechanical systems (MEMS).
Preweighed monomer and curing agent in convenient blister packs. SYLGARD® 186 Silicone Elastomer Kit is comprised of base/curing agent to be mixed in a 10 (base): 1 (curing agent) ratio by weight for manual mixing.
Potential Uses:
- General potting applications.
- Power supplies.
- Connectors.
- Sensors.
- Industrial controls.
- Transformers.
- Amplifiers.
- High voltage resistor packs.
- Relays.
- Adhesive/encapsulant for solar cells.
- Adhesive handling beam lead integrated circuits during processing.
Working time at 25 °C (pot life hours): 1.65 hr.
Heat cure time at 100 °C: 25 minutes.
Heat cure time at 125 °C: 15 minutes.
Heat cure time at 150 °C: 15 minutes.
Features:
- 10:1 mix ratio.
- High viscosity.
- RT and heat cure.
- High tear strength.
- UL tested.
Benefits:
- Rapid, versatile cure processing controlled by temperature.
- Can be considered for uses requiring UL requirements.
Dow Corning is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Sylgard is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Quality Level | 100 |
viscosity | 123800 cP (part A or based), 66700 cP (mixed) |
pictograms | GHS07 |
signalword | Warning |
hcodes | H315 - H319 - H335 |
pcodes | P261 - P264 - P271 - P280 - P302 + P352 - P305 + P351 + P338 |
Target Organs | Respiratory system |
RIDADR | NONH for all modes of transport |