Millex® Syringe Filters
- Сортировать:
- Вид таблицей
-
Millex Samplicity® Filters, 0.20 µm SAMPLG001
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LG
Overview of Millex Samplicity Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials.
• Filtration for HPLC sample prep without syringes
• Millex Samplicity Filters provide integrated funnels and filters for easiest sample loading
• Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE and Durapore PVDF membranes
Available in 2 Pack Sizes:
SKU ending with 01 (-------01): 96 per pack
SKU ending with 04 (-------04): 384 devices (4x 96 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLCApplicationTo be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.Packagingnon sterileSpecificationsFor general laboratory use onlyLegal InformationMillex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene Quality Level 400 sterility non-sterile product line Millex® feature hydrophilic Торговая марка Samplicity® parameter 0.3 mL min. working volume, 0.3-1.6 mL process volume application(s) HPLC: suitable, sample preparation: suitable (analytical) filter diam. 25 mm pore size 0.2 µm pore size fitting inlet funnel (Easy loading), outlet tip (for smooth transfer to HPLC vials) shipped in ambient Узнать цену -
Millex Samplicity® Filters, 0.20 µm SAMPLG004
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LG
Overview of Millex Samplicity Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials.
• Filtration for HPLC sample prep without syringes
• Millex Samplicity Filters provide integrated funnels and filters for easiest sample loading
• Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE and Durapore PVDF membranes
Available in 2 Pack Sizes:
SKU ending with 01 (-------01): 96 per pack
SKU ending with 04 (-------04): 384 devices (4x 96 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLCApplicationTo be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.Packagingnon sterileSpecificationsFor general laboratory use onlyLegal InformationMillex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene sterility non-sterile product line Millex® feature hydrophilic Торговая марка Samplicity® parameter 0.3 mL min. working volume, 0.3-1.6 mL process volume application(s) HPLC: suitable, sample preparation: suitable (analytical) filter diam. 25 mm pore size 0.2 µm pore size fitting inlet funnel (Easy loading), outlet tip (for smooth transfer to HPLC vials) shipped in ambient Узнать цену -
Millex Samplicity® Filters, 0.45µm SAMPLCR01
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LCR
Overview of Millex Samplicity Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials.
• Filtration for HPLC sample prep without syringes
• Millex Samplicity Filters provide integrated funnels and filters for easiest sample loading
• Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE and Durapore PVDF membranes
Available in 2 Pack Sizes:
SKU ending with 01 (-------01): 96 per pack
SKU ending with 04 (-------04): 384 devices (4x 96 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLCApplicationTo be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.Packagingnon sterileSpecificationsFor general laboratory use onlyLegal InformationMillex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene Quality Level 400 sterility non-sterile product line Millex® feature hydrophilic Торговая марка Samplicity® parameter 0.3 mL min. working volume, 0.3-1.6 mL process volume application(s) HPLC: suitable, sample preparation: suitable (analytical) filter diam. 25 mm pore size 0.45 µm pore size fitting inlet funnel (Easy loading), outlet tip (for smooth transfer to HPLC vials) shipped in ambient Узнать цену -
Millex Samplicity® Filters, 0.45µm SAMPHV004
eCl@ss: 32031690 NACRES: NB.24 General descriptionOverview of Millex Samplicity Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials.
• Filtration for HPLC sample prep without syringes
• Millex Samplicity Filters provide integrated funnels and filters for easiest sample loading
• Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE and Durapore PVDF membranes
Available in 2 Pack Sizes:
SKU ending with 01 (-------01): 96 per pack
SKU ending with 04 (-------04): 384 devices (4x 96 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLCApplicationTo be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.Legal InformationMillex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, high-density polyethylene sterility non-sterile product line Millex® feature hydrophilic Торговая марка Samplicity® application(s) HPLC: suitable filter diam. 25 mm pore size 0.45 µm pore size fitting inlet funnel (Easy loading), outlet tip (for smooth transfer to HPLC vials) shipped in ambient Узнать цену -
Millex Samplicity® Filters, 0.45µm SAMPHV001
eCl@ss: 32031690 NACRES: NB.24 General descriptionOverview of Millex Samplicity Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials.
• Filtration for HPLC sample prep without syringes
• Millex Samplicity Filters provide integrated funnels and filters for easiest sample loading
• Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE and Durapore PVDF membranes
Available in 2 Pack Sizes:
SKU ending with 01 (-------01): 96 per pack
SKU ending with 04 (-------04): 384 devices (4x 96 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLCApplicationTo be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.Legal InformationMillex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, high-density polyethylene Quality Level 400 sterility non-sterile product line Millex® feature hydrophilic Торговая марка Samplicity® parameter 0.3-1.6 mL process volume application(s) HPLC: suitable filter diam. 25 mm pore size 0.45 µm pore size fitting inlet funnel (Easy loading), outlet tip (for smooth transfer to HPLC vials) shipped in ambient Узнать цену -
Millex Samplicity® Filters, 0.45µm SAMPLCR04
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LCR
Overview of Millex Samplicity Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials.
• Filtration for HPLC sample prep without syringes
• Millex Samplicity Filters provide integrated funnels and filters for easiest sample loading
• Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE and Durapore PVDF membranes
Available in 2 Pack Sizes:
SKU ending with 01 (-------01): 96 per pack
SKU ending with 04 (-------04): 384 devices (4x 96 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLCPackagingnon sterileSpecificationsFor general laboratory use onlyLegal InformationMillex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene sterility non-sterile product line Millex® feature hydrophilic Торговая марка Samplicity® parameter 0.3 mL min. working volume, 0.3-1.6 mL process volume application(s) HPLC: suitable, sample preparation: suitable (analytical) filter diam. 25 mm pore size 0.45 µm pore size fitting inlet funnel (Easy loading), outlet tip (for smooth transfer to HPLC vials) shipped in ambient Узнать цену -
Millex Syringe Filter Unit, PTFE, Hydrophilic, Non-sterile SLCRX13TL
eCl@ss: 32031690 General descriptionFilter Code: LCR
Overview of Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE Membrane
•Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS
•Filtration of protein-containing solutions, and aqueous or organic solutions
•Available in 0.20 µm and 0.45 µm pore sizes and three diameters to suit your application needs
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Filtration of Biological Samples and Protein SolutionsPackagingnon sterileSpecificationsFor general laboratory use onlyLinkageReplaces: SLCRT13NLPhysical formColor Code: BlueLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophilic Торговая марка Millex® parameter 10 bar max. inlet pressure (150 psi), 107 mL/min flow rate, 107 mL/min water flow rate, 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 48 mm filter diam. 13 mm filtration area 0.8 cm2 pore size 0.45 µm pore size input sample type organic solution(s)
sample type aqueous solution(s)bubble point 1.4 bar at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, outlet tube shipped in ambient 478,50 € / 46 693 ₽Получить предложение -
Millex Syringe Filter, Durapore® ( PVDF ), Automation Compatible, Non-sterile SLHVMZ5NZ
eCl@ss: 32031690 NACRES: NB.24 Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, high-density polyethylene , high-density polyethylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 0.25 mL, hydrophilic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 21 mm filter diam. 2.5 cm filtration area 3.9 cm2 matrix Durapore® pore size 0.45 µm pore size input sample type mild organic solution(s)
sample type aqueous solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex Syringe Filter, Durapore® ( PVDF ), Non-sterile
eCl@ss: 32031690 NACRES: NB.24
Кат. номер SLHV033NB SLHV033NS SLHV033NK General descriptionOverview of Non-Sterile Millex® Syringe Filters with Durapore (PVDF) Membrane
•Low protein binding to minimize interaction with your sample and maximize recovery
•Compatible with aqueous and mild organic solutions
•Available in 0.22 µm and 0.45 µm pore sizes and three diameters to suit your application needs
•Housing materials are either polypropylene or high density polyethylene (HDPE), offering low levels of extractables and broad chemical compatibility
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Filtration of Biological Samples and Protein Solutions
Filter Code: HVPackaging50 pk in non sterile
250, 1000 ea in non sterile
non sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: YellowLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, polypropylene , polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 80 µL (after air purge), hydrophilic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi) application(s) sample preparation: suitable (analytical) H 27 mm filter diam. 33 mm filtration area 4.5 cm2 matrix Durapore® pore size 0.45 µm pore size input sample type aqueous solution(s)
sample type mild organic solution(s)bubble point 1.6 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient от 41 385 до 474 603 ₽Получить предложение -
Millex Syringe Filter, Durapore® ( PVDF ), Non-sterile SLHVX13NL
eCl@ss: 32031690 NACRES: NB.24 General descriptionOverview of Non-Sterile Millex® Syringe Filters with Durapore (PVDF) Membrane
•Low protein binding to minimize interaction with your sample and maximize recovery
•Compatible with aqueous and mild organic solutions
•Available in 0.22 µm and 0.45 µm pore sizes and three diameters to suit your application needs
•Housing materials are either polypropylene or high density polyethylene (HDPE), offering low levels of extractables and broad chemical compatibility
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Filtration of Biological Samples and Protein Solutions
Filter Code: HVApplication0.45 µm pore size, 13 mm diameter, Millex-HV Durapore® ( PVDF ) membrane, hydrophilicPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: YellowLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, polypropylene , polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophilic Торговая марка Millex® parameter 10 mL process volume, 10 bar max. inlet pressure (150 psi), 101 L/min flow rate, 101 mL/min-cm2 water flow rate, 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 21 mm filter diam. 13 mm filtration area 0.8 cm2 matrix Durapore® pore size 0.45 µm pore size input sample type mild organic solution(s)
sample type aqueous solution(s)bubble point 1.5 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex Syringe Filter, Durapore® ( PVDF ), Non-sterile SLSV025NB
eCl@ss: 32031690 NACRES: NB.24 General descriptionOverview of Non-Sterile Millex® Syringe Filters with Durapore (PVDF) Membrane
•Low protein binding to minimize interaction with your sample and maximize recovery
•Compatible with aqueous and mild organic solutions
•Available in 0.22 µm and 0.45 µm pore sizes and three diameters to suit your application needs
•Housing materials are either polypropylene or high density polyethylene (HDPE), offering low levels of extractables and broad chemical compatibility
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Filtration of Biological Samples and Protein Solutions
Filter Code: SVPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Clear inlet/clear outletLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVC , PVC housing, PVDF membrane Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 100 µL, hydrophilic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 5.2 bar max. inlet pressure (75 psi) application(s) sample preparation: suitable (analytical) H 25 mm filter diam. 25 mm filtration area 3.9 cm2 matrix Durapore® pore size 5.0 µm pore size input sample type mild organic solution(s)
sample type aqueous solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex Syringe Filter, Durapore® ( PVDF ), Non-sterile SLHVX13TL
eCl@ss: 32031690 NACRES: NB.24 General descriptionOverview of Non-Sterile Millex® Syringe Filters with Durapore (PVDF) Membrane
•Low protein binding to minimize interaction with your sample and maximize recovery
•Compatible with aqueous and mild organic solutions
•Available in 0.22 µm and 0.45 µm pore sizes and three diameters to suit your application needs
•Housing materials are either polypropylene or high density polyethylene (HDPE), offering low levels of extractables and broad chemical compatibility
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Filtration of Biological Samples and Protein Solutions
Filter Code: HVPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: YellowLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, polypropylene , polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophilic Торговая марка Millex® parameter 10 mL process volume, 10 bar max. inlet pressure (150 psi), 101 L/min flow rate, 101 mL/min-cm2 water flow rate, 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 48 mm filter diam. 13 mm filtration area 0.8 cm2 matrix Durapore® pore size 0.45 µm pore size input sample type mild organic solution(s)
sample type aqueous solution(s)bubble point 1.5 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, outlet tube shipped in ambient Узнать цену -
Millex Syringe Filter, Durapore® ( PVDF ), Non-sterile SLGVX13TL
eCl@ss: 32031690 NACRES: NB.24 Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, polypropylene , polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophilic Торговая марка Millex® parameter 10 mL process volume, 10 bar max. inlet pressure (150 psi), 16 L/min flow rate, 16 mL/min-cm2 water flow rate, 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 48 mm filter diam. 13 mm filtration area 0.8 cm2 matrix Durapore® pore size 0.22 µm pore size input sample type mild organic solution(s)
sample type aqueous solution(s)bubble point 3.4 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, outlet tube shipped in ambient Узнать цену -
Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile
eCl@ss: 32031690 NACRES: NB.24
Кат. номер SLFH025NB SLFH025NS SLFH025NK Legal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 100 µL, hydrophobic Торговая марка Millex® parameter 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 19.7 mm filter diam. 25 mm filtration area 3.9 cm2 matrix Fluoropore® pore size 0.45 µm pore size input sample type organic solution(s) fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient от 59 178 до 437 170 ₽Получить предложение -
Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile SLLS025NS
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LS
Overview of Non-Sterile Millex® Syringe Filters with Hydrophobic Fluoropore (PTFE) Membrane:
• Ideal for filtering samples in organic solvents, and can also be used to prevent back-streaming of atmospheric moisture in venting applications.
• Broad chemical compatibility and excellent solvent resistance with organic solutions
• Available in 0.20 µm, 0.45 µm, and 5.0 µm pore sizes and three diameters to suit your application needs
• Housing is made from a low-extractable, high density polyethylene (HDPE) or polypropylene.
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Fine Particle Removal and Clarification of Organic Solutions, Vent Filtration, Sterilization of GasesPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 100 µL, hydrophobic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 19.8 mm filter diam. 25 mm filtration area 3.9 cm2 matrix Fluoropore® pore size 5.0 µm pore size input sample type aqueous solution(s)
sample type organic solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient 497,00 € / 48 499 ₽Получить предложение -
Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile SLFG02550
eCl@ss: 32031690 NACRES: NB.22 General descriptionMillex® syringe filter units with hydrophobic Fluoropore or Millipore Express PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore membrane can also be used for sterilizing or clarifying organic solutions. There are also specialized filter units to protect hemodialysis transducers from blood and moisture. The 50 mm Millex filter units are especially useful for vacuum line protection. All units are bi-directional.
Features & Benefits:
•Specialized filter units protect hemodialysis transducers from blood and moisture
•50 mm Millex units ideal for vacuum line protection
•All Millex Hydrophobic PTFE units are bi-directional in flow
Applications:
Sterilizing Gases, Vacuum Line Protection, Venting Sterile Containers, Sterilizing and Clarifying Organic Solutions
Filter Code: FGPhysical formColor Code: Natural inlet/natural outletPreparation NoteSterilization Method
AutoclavableOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilizing of gases, venting sterile containers, and sterilizing or clarifying aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 0.1 mL, hydrophobic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 5.2 bar max. inlet pressure (75 psi) application(s) sample preparation: suitable (analytical) H 25 mm diam. 2.5 cm filter diam. 25 mm filtration area 3.9 cm2 matrix Fluoropore® pore size 0.2 µm pore size input sample type: human embryonic stem cell(s)
sample type: mouse embryonic stem cell(s)
sample type mesenchymal stem cell(s)
sample type hematopoietic stem cell(s)
sample type epithelial cells
sample type induced pluripotent stem cell(s)
sample type neural stem cell(s)
sample type cardiac stem cell(s)
sample type pancreatic stem cell(s)test parameters sample volume: 100 mL fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient 619,50 € / 60 452 ₽Получить предложение -
Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile SLFGR04NL
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: FG
Overview of Non-Sterile Millex® Syringe Filters with Hydrophobic Fluoropore (PTFE) Membrane:
• Ideal for filtering samples in organic solvents, and can also be used to prevent back-streaming of atmospheric moisture in venting applications.
• Broad chemical compatibility and excellent solvent resistance with organic solutions
• Available in 0.20 µm, 0.45 µm, and 5.0 µm pore sizes and three diameters to suit your application needs
• Housing is made from a low-extractable, high density polyethylene (HDPE) or polypropylene.
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Fine Particle Removal and Clarification of Organic Solutions, Vent Filtration, Sterilization of GasesApplication0.20 µm pore size, 4 mm diameter, Millex-FG hydrophobic PTFE membranePackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing sterility non-sterile product line Millex® feature holdup volume< 10 µL, hydrophobic Торговая марка Millex® parameter 1 mL process volume, 14 bar max. inlet pressure (200 psi), 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 19.7 mm filter diam. 4 mm filtration area 0.1 cm2 matrix Fluoropore® pore size 0.2 µm pore size input sample type organic solution(s) fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip, male Luer outlet stepped slip shipped in ambient 418,61 € / 40 849 ₽Получить предложение -
Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile SLFHR04NL
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: FH
Overview of Non-Sterile Millex® Syringe Filters with Hydrophobic Fluoropore (PTFE) Membrane:
• Ideal for filtering samples in organic solvents, and can also be used to prevent back-streaming of atmospheric moisture in venting applications.
• Broad chemical compatibility and excellent solvent resistance with organic solutions
• Available in 0.20 µm, 0.45 µm, and 5.0 µm pore sizes and three diameters to suit your application needs
• Housing is made from a low-extractable, high density polyethylene (HDPE) or polypropylene.
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Fine Particle Removal and Clarification of Organic Solutions, Vent Filtration, Sterilization of GasesPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing sterility non-sterile product line Millex® feature holdup volume< 10 µL, hydrophobic Торговая марка Millex® parameter 1 mL process volume, 14 bar max. inlet pressure (200 psi), 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 19.7 mm filter diam. 4 mm filtration area 0.1 cm2 matrix Fluoropore® pore size 0.45 µm pore size input sample type organic solution(s) fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip, male Luer outlet stepped slip shipped in ambient 400,75 € / 39 106 ₽Получить предложение -
Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile SLFHX13TL
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: FH
Overview of Non-Sterile Millex® Syringe Filters with Hydrophobic Fluoropore (PTFE) Membrane:
• Ideal for filtering samples in organic solvents, and can also be used to prevent back-streaming of atmospheric moisture in venting applications.
• Broad chemical compatibility and excellent solvent resistance with organic solutions
• Available in 0.20 µm, 0.45 µm, and 5.0 µm pore sizes and three diameters to suit your application needs
• Housing is made from a low-extractable, high density polyethylene (HDPE) or polypropylene.
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Fine Particle Removal and Clarification of Organic Solutions, Vent Filtration, Sterilization of GasesPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: RedLegal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, polypropylene , polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophobic Торговая марка Millex® parameter 10 mL process volume, 10 bar max. inlet pressure (150 psi), 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 48 mm filter diam. 13 mm filtration area 0.8 cm2 matrix Fluoropore® pore size 0.45 µm pore size input sample type mild organic solution(s) bubble point 0.6 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, outlet tube shipped in ambient Узнать цену -
Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile SLFGX13TL
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: FG
Overview of Non-Sterile Millex® Syringe Filters with Hydrophobic Fluoropore (PTFE) Membrane:
• Ideal for filtering samples in organic solvents, and can also be used to prevent back-streaming of atmospheric moisture in venting applications.
• Broad chemical compatibility and excellent solvent resistance with organic solutions
• Available in 0.20 µm, 0.45 µm, and 5.0 µm pore sizes and three diameters to suit your application needs
• Housing is made from a low-extractable, high density polyethylene (HDPE) or polypropylene.
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Fine Particle Removal and Clarification of Organic Solutions, Vent Filtration, Sterilization of GasesPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: RedLegal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, polypropylene , polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophobic Торговая марка Millex® parameter 10 mL process volume, 10 bar max. inlet pressure (150 psi), 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 48 mm filter diam. 13 mm filtration area 0.8 cm2 matrix Fluoropore® pore size 0.2 µm pore size input sample type mild organic solution(s) bubble point 0.8 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, outlet tube shipped in ambient Узнать цену -
Millex Syringe Filter, Hydrophilic PTFE, HPF, Non-sterile SLCRM25NS
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: HPF/LCR
Overview of Non-Sterile Millex® HPF Syringe Filters
• HPF Millex includes two different media: a graduated glass fiber prefilter (10.0 to 0.7 µm) to remove larger particles and an 0.20 or 0.45 µm membrane filter for fine filtration
• Significantly greater throughput than standard filters without prefiltration media, especially when filtering particle-laden solutions
• For manual or automated use
• Low-extractable polyethylene housing
Available in 3 Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NK (-------NK): 1000 per pack
SKU ending with NZ (-------NZ): 200 pack that is preassembled in 8 tubes of 25 each.
Applications:
Drug Dissolution Testing, Automated Sample Preparation, Clarification of Solutions Containing High Particle LevelsPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 0.25 mL, hydrophilic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 21 mm filter diam. 25 mm filtration area 3.9 cm2 pore size 0.45 µm pore size fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile SLLGR04NL
eCl@ss: 32031690 NACRES: NB.22 General descriptionFilter Code: LG
Overview of Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE
• Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS
• Filtration of protein-containing solutions, and aqueous or organic solutions
• Available in 0.20 µm and 0.45 µm pore sizes and three diameters to suit your application needs
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
SLCRT13NL: 100 per pack. These syringe filters have a tube outlet
Applications:
Sample Filtration Prior to UHPLC, HPLC and Mass Spec; Solvent Filtration; Clarification of Aqueous and Organic SolutionsApplication0.20 µm pore size, 4 mm diameter, Millex-LG hydrophilic PTFE membranePackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing sterility non-sterile product line Millex® feature holdup volume< 10 µL, hydrophilic Торговая марка Millex® parameter 14 bar max. inlet pressure (200 psi), 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 19.8 mm filter diam. 4 mm filtration area 0.1 cm2 pore size 0.2 µm pore size input sample type organic solution(s)
sample type aqueous solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip, male Luer outlet stepped slip shipped in ambient 418,25 € / 40 814 ₽Получить предложение -
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile SLLHC25NS
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LH
Overview of Non-Sterile IC Millex® Syringe Filters:
• Ion chromatography certified
• Hydrophilic PTFE membrane available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs.
• Low level of IC extractables, optimizing background levels in sensitive IC analyses
• Compatible with both aqueous and organic solutions, offering broad chemical compatibility and flexibility in the lab
SKU and Pack Sizes
SLLGC13NL: 0.2 µm Hydrophilic PTFE, 13mm, 100 per pack
SLLGC25NS: 0.2 µm Hydrophilic PTFE, 25mm, 50 per pack
SLLHC13NL: 0.45 µm Hydrophilic PTFE, 13mm, 100 per pack
SLLHC25NS: 0.45 µm Hydrophilic PTFE, 25mm, 50 per pack
Applications:
Ion ChromatographyPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 100 µL (after air purge), hydrophilic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 19.8 mm filter diam. 25 mm filtration area 3.9 cm2 pore size 0.45 µm pore size input sample type aqueous solution(s)
sample type organic solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient 640,50 € / 62 502 ₽Получить предложение -
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile SLLHR04NL
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LH
Overview of Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE
• Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS
• Filtration of protein-containing solutions, and aqueous or organic solutions
• Available in 0.20 µm and 0.45 µm pore sizes and three diameters to suit your application needs
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
SLCRT13NL: 100 per pack. These syringe filters have a tube outlet
Applications:
Sample Filtration Prior to UHPLC, HPLC and Mass Spec; Solvent Filtration; Clarification of Aqueous and Organic SolutionsPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing sterility non-sterile product line Millex® feature holdup volume< 10 µL, hydrophilic Торговая марка Millex® parameter 1 mL process volume, 14 bar max. inlet pressure (200 psi), 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 19.7 mm filter diam. 4 mm filtration area 0.1 cm2 pore size 0.45 µm pore size input sample type aqueous solution(s)
sample type organic solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip, male Luer outlet stepped slip shipped in ambient 461,27 € / 45 012 ₽Получить предложение -
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile SLCRT13NL
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LCR
Overview of Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE
• Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS
• Filtration of protein-containing solutions, and aqueous or organic solutions
• Available in 0.20 µm and 0.45 µm pore sizes and three diameters to suit your application needs
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
SLCRT13NL: 100 per pack. These syringe filters have a tube outlet
Applications:
Sample Filtration Prior to UHPLC, HPLC and Mass Spec; Solvent Filtration; Clarification of Aqueous and Organic SolutionsPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane (hydrophilic), high-density polyethylene , high-density polyethylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 25 µL (after air purge), hydrophobic Торговая марка Millex® parameter 10 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 48.2 mm filter diam. 13 mm filtration area 0.65 cm2 pore size 0.45 µm pore size input sample type aqueous solution(s)
sample type mild organic solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, outlet tube shipped in ambient 763,86 € / 74 540 ₽Получить предложение -
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile SLLGC25NS
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LG
Overview of Non-Sterile IC Millex® Syringe Filters:
• Ion chromatography certified
• Hydrophilic PTFE membrane available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs.
• Low level of IC extractables, optimizing background levels in sensitive IC analyses
• Compatible with both aqueous and organic solutions, offering broad chemical compatibility and flexibility in the lab
SKU and Pack Sizes
SLLGC13NL: 0.2 µm Hydrophilic PTFE, 13mm, 100 per pack
SLLGC25NS: 0.2 µm Hydrophilic PTFE, 25mm, 50 per pack
SLLHC13NL: 0.45 µm Hydrophilic PTFE, 13mm, 100 per pack
SLLHC25NS: 0.45 µm Hydrophilic PTFE, 25mm, 50 per pack
Applications:
Ion ChromatographyApplication0.20 µm pore size, 25 mm diameter, Millex-LG hydrophilic PTFE membrane, ion chromatography certifiedPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 100 µL, hydrophilic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 19.8 mm filter diam. 25 mm filtration area 3.9 cm2 pore size 0.2 µm pore size input sample type organic solution(s)
sample type aqueous solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient 559,13 € / 54 561 ₽Получить предложение -
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile SLLGC13NL
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LG
Overview of Non-Sterile IC Millex® Syringe Filters:
• Ion chromatography certified
• Hydrophilic PTFE membrane available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs.
• Low level of IC extractables, optimizing background levels in sensitive IC analyses
• Compatible with both aqueous and organic solutions, offering broad chemical compatibility and flexibility in the lab
SKU and Pack Sizes
SLLGC13NL: 0.2 µm Hydrophilic PTFE, 13mm, 100 per pack
SLLGC25NS: 0.2 µm Hydrophilic PTFE, 25mm, 50 per pack
SLLHC13NL: 0.45 µm Hydrophilic PTFE, 13mm, 100 per pack
SLLHC25NS: 0.45 µm Hydrophilic PTFE, 25mm, 50 per pack
Applications:
Ion ChromatographyPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 25 µL, hydrophilic Торговая марка Millex® parameter 10 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 21.1 mm filter diam. 13 mm filtration area 0.65 cm2 pore size 0.2 µm pore size input sample type organic solution(s)
sample type aqueous solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient 726,25 € / 70 869 ₽Получить предложение -
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile SLLHC13NL
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: LH
Overview of Non-Sterile IC Millex® Syringe Filters:
• Ion chromatography certified
• Hydrophilic PTFE membrane available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs.
• Low level of IC extractables, optimizing background levels in sensitive IC analyses
• Compatible with both aqueous and organic solutions, offering broad chemical compatibility and flexibility in the lab
SKU and Pack Sizes
SLLGC13NL: 0.2 µm Hydrophilic PTFE, 13mm, 100 per pack
SLLGC25NS: 0.2 µm Hydrophilic PTFE, 25mm, 50 per pack
SLLHC13NL: 0.45 µm Hydrophilic PTFE, 13mm, 100 per pack
SLLHC25NS: 0.45 µm Hydrophilic PTFE, 25mm, 50 per pack
Applications:
Ion ChromatographyApplication0.45 µm pore size, 13 mm diameter, Millex-LH hydrophilic PTFE membrane, ion chromatography certifiedPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 25 µL (after air purge), hydrophilic Торговая марка Millex® parameter 10 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 21.1 mm filter diam. 13 mm filtration area 0.65 cm2 pore size 0.45 µm pore size input sample type aqueous solution(s)
sample type organic solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient 740,25 € / 72 236 ₽Получить предложение -
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile SLLHR04NK
eCl@ss: 32031690 NACRES: NB.24 Legal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing sterility non-sterile product line Millex® feature holdup volume< 10 µL, hydrophilic Торговая марка Millex® parameter 1 mL process volume, 14 bar max. inlet pressure (200 psi), 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 19.7 mm filter diam. 4 mm filtration area 0.1 cm2 pore size 0.45 µm pore size input sample type aqueous solution(s)
sample type organic solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip, male Luer outlet stepped slip shipped in ambient 3 640,00 € / 355 201 ₽Получить предложение -
Millex Syringe Filter, Nylon, Automation Compatible, Non-sterile SLHNBZ5NZ
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: HN/PB
Automation-Compatible, Non-Sterile Millex® Syringe Filters:
- Designed to provide efficient filtration for dissolution and other automated sample preparation applications
- Domed housing ensures reliable delivery of filters
- Available in a variety of membrane types and pore sizes, including units with prefilters for particulate-laden samples.
- Available in either bulk or delivery tubes for use with automated filter-changing systems
- Luer-Lok connection optimized for precise alignment and fit
Available in 2 pack sizes:
- SKU ending with NZ (-------NZ): 200 pack that is preassembled in 8 tubes of 25 each.
- SKU ending with NK (-------NK): 1000 per pack, supplied in bulk format
Applications:
- Drug Dissolution Testin
- Automated Sample Preparation
- Clarification of Solutions Containing High Particle LevelsApplication0.45 µm pore size, 25 mm diameter, Millex-HN Nylon membrane with glass fiber prefilter, hydrophilic, domed housingPackaging8 tubes, each containing 25 unitsSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletOther NotesAutomation Compatible: YesLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material Nylon membrane, high-density polyethylene , high-density polyethylene housing sterility non-sterile product line Millex® feature holdup volume 200 µL, hydrophilic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 21 mm filter diam. 2.5 cm filtration area 3.9 cm2 pore size 0.45 µm pore size input sample type mild organic solution(s)
sample type aqueous solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex Syringe Filter, Nylon, Automation Compatible, Non-sterile SLHNMZ5NZ
eCl@ss: 32031690 NACRES: NB.24 General descriptionNon-Sterile Millex® HPF Syringe Filters
- HPF Millex includes two different media: a graduated glass fiber prefilter (10.0 to 0.7 µm) to remove larger particles and an 0.20 or 0.45 µm membrane filter for fine filtration
- Significantly greater throughput than standard filters without prefiltration media, especially when filtering particle-laden solutions
- For manual or automated use
- Low-extractable polyethylene housing
Available in 3 Pack Sizes:
- SKU ending with NS (-------NS): 50 per pack
- SKU ending with NK (-------NK): 1000 per pack
- SKU ending with NZ (-------NZ): 200 pack that is preassembled in 8 tubes of 25 each.
Applications:
- Drug Dissolution Testing
- Automated Sample Preparation
- Clarification of Solutions Containing High Particle Levels
Filter Code: HPF/NylonApplication0.45 µm pore size, 25 mm diameter, Millex-HN Nylon membrane with glass fiber prefilter, hydrophilic, domed housingPackaging8 tubes, each containing 25 unitsSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletOther NotesAutomation Compatible: YesLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material Nylon membrane, high-density polyethylene , high-density polyethylene housing sterility non-sterile product line Millex® feature holdup volume 0.25 mL, hydrophilic Торговая марка Millex® parameter 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 21 mm filter diam. 2.5 cm filtration area 3.9 cm2 pore size 0.45 µm pore size input sample type aqueous solution(s)
sample type mild organic solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex Syringe Filter, Nylon, Automation Compatible, Non-sterile SLHNBZ5NK
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: HN/PB
Automation-Compatible, Non-Sterile Millex® Syringe Filters:
- Designed to provide efficient filtration for dissolution and other automated sample preparation applications
- Domed housing ensures reliable delivery of filters
- Available in a variety of membrane types and pore sizes, including units with prefilters for particulate-laden samples.
- Available in either bulk or delivery tubes for use with automated filter-changing systems
- Luer-Lok connection optimized for precise alignment and fit
Available in 2 pack sizes:
- SKU ending with NZ (-------NZ): 200 pack that is preassembled in 8 tubes of 25 each.
- SKU ending with NK (-------NK): 1000 per pack, supplied in bulk format
Applications:
- Drug Dissolution Testin
- Automated Sample Preparation
- Clarification of Solutions Containing High Particle LevelsPackagingBulk, non sterile 1,000 units (no tubes)SpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletOther NotesAutomation Compatible: YesLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material Nylon membrane, high-density polyethylene , high-density polyethylene housing sterility non-sterile product line Millex® feature holdup volume 200 µL, hydrophilic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 21 mm filter diam. 2.5 cm filtration area 3.9 cm2 pore size 0.45 µm pore size input sample type mild organic solution(s)
sample type aqueous solution(s)fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex Syringe Filter, Nylon, Non-sterile
eCl@ss: 32031690 NACRES: NB.24
Кат. номер SLGNX13NL SLGNX13NK General descriptionFilter Code: GN
Overview of Non-Sterile Millex® Syringe Filters with Nylon Membrane:
• Non-sterile Millex syringe filters with hydrophilic nylon membrane are compatible with a broad range of solvents
• Available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs
• Compatible with both aqueous and organic solutions, providing broad chemical compatibility and flexibility in the lab
• Polypropylene housing, offering a low level of extractables and broad chemical compatibility
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Clarification of Aqueous and Organic SolutionsPackaging100 ea in non sterile
non sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: PurpleLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material Nylon membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophilic Торговая марка Millex® parameter 10 mL process volume, 10 bar max. inlet pressure (150 psi), 18 L/min flow rate, 18 mL/min-cm2 water flow rate, 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 21 mm filter diam. 13 mm filtration area 0.8 cm2 pore size 0.2 µm pore size input sample type mild organic solution(s)
sample type aqueous solution(s)bubble point 3.0 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex Syringe Filter, Nylon, Non-sterile SLHNX13TL
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: HN
Non-Sterile Millex® Syringe Filters with Nylon Membrane:
- Non-sterile Millex syringe filters with hydrophilic nylon membrane are compatible with a broad range of solvents
- Available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs
- Compatible with both aqueous and organic solutions, providing broad chemical compatibility and flexibility in the lab
- Polypropylene housing, offering a low level of extractables and broad chemical compatibility
Available in Multiple Pack Sizes:
- SKU ending with NS (-------NS): 50 per pack
- SKU ending with NL (-------NL): 100 per pack
- SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
- SKU ending with NB (-------NB): 250 per pack
- SKU ending with NK (-------NK): 1000 per pack
Applications:
- Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec
- Solvent Filtration
- Clarification of Aqueous and Organic SolutionsPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: PurpleLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material Nylon membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophilic Торговая марка Millex® parameter 10 mL process volume, 10 bar max. inlet pressure (150 psi), 37 L/min flow rate, 37 mL/min-cm2 water flow rate, 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 48 mm filter diam. 13 mm filtration area 0.8 cm2 pore size 0.45 µm pore size input sample type aqueous solution(s)
sample type mild organic solution(s)bubble point 2.2 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, outlet tube shipped in ambient Узнать цену -
Millex Syringe Filter, Nylon, Non-sterile SLGNX13TL
eCl@ss: 32031690 NACRES: NB.24 General descriptionFilter Code: GN
Non-Sterile Millex® Syringe Filters with Nylon Membrane:
- Non-sterile Millex syringe filters with hydrophilic nylon membrane are compatible with a broad range of solvents
- Available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs
- Compatible with both aqueous and organic solutions, providing broad chemical compatibility and flexibility in the lab
- Polypropylene housing, offering a low level of extractables and broad chemical compatibility
Available in Multiple Pack Sizes:
- SKU ending with NS (-------NS): 50 per pack
- SKU ending with NL (-------NL): 100 per pack
- SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
- SKU ending with NB (-------NB): 250 per pack
- SKU ending with NK (-------NK): 1000 per pack
Applications:
- Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec
- Solvent Filtration
- Clarification of Aqueous and Organic SolutionsApplication0.20 µm pore size, 13 mm diameter, Millex-GN Nylon membrane, hydrophilic, tube outletPackagingnon sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: PurpleLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material Nylon membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophilic Торговая марка Millex® parameter 10 mL process volume, 10 bar max. inlet pressure (150 psi), 18 L/min flow rate, 18 mL/min-cm2 water flow rate, 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 48 mm filter diam. 13 mm filtration area 0.8 cm2 pore size 0.2 µm pore size input sample type aqueous solution(s)
sample type mild organic solution(s)bubble point 3.0 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, outlet tube shipped in ambient Узнать цену -
Millex Syringe Filter, PES, Non-sterile SLGPX13NL
eCl@ss: 32031690 NACRES: NB.24 Application0.22 µm pore size, 13 mm diameter, Millex-GP PES Millipore Express membrane, hydrophilicLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material polyethersulfone membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophilic Торговая марка Millex® parameter 10 mL process volume, 10 bar max. inlet pressure (150 psi), 45 °C max. temp., 48 L/min flow rate, 48 mL/min-cm2 water flow rate application(s) sample preparation: suitable (analytical) H 21 mm filter diam. 13 mm filtration area 0.8 cm2 pore size 0.22 µm pore size input sample type aqueous solution(s)
sample type mild organic solution(s)bubble point 4.1 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex Syringe Filter, PES, Non-sterile SLGPX13NK
eCl@ss: 32031690 NACRES: NB.24 Legal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material polyethersulfone membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 15 µL (after air purge), hydrophilic Торговая марка Millex® parameter 10 bar max. inlet pressure (150 psi), 45 °C max. temp., 48 L/min flow rate, 48 mL/min-cm2 water flow rate application(s) sample preparation: suitable (analytical) H 21 mm filter diam. 13 mm filtration area 0.8 cm2 pore size 0.22 µm pore size input sample type mild organic solution(s)
sample type aqueous solution(s)bubble point 4.1 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex-AP Syringe Filter Unit, AP20 SLAP05010
eCl@ss: 32031690 NACRES: NB.22 General descriptionNo Content Available
Filter Code: APPhysical formColor Code: Natural inlet/natural outletPreparation NoteSterilization Method
AutoclavableLegal InformationMillex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial glass fiber membrane, polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 2.2 mL, hydrophilic Торговая марка Millex® parameter 4 L process volume, 4.1 bar max. inlet pressure (60 psi), 45 °C max. temp. application(s) sample preparation: suitable (analytical) H 71 mm diam. 5 cm filter diam. 50 mm filtration area 19.6 cm2 pore size 2.0 µm pore size test parameters sample volume: 4 L fitting inlet stepped hose barb (with Female Luer slip interior), outlet stepped hose barb (with Female Luer slip interior) shipped in ambient Узнать цену -
Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm SLFGL25BS
eCl@ss: 32031690 NACRES: NB.22 General descriptionMillex® syringe filter units with hydrophobic Fluoropore or Millipore Express PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore membrane can also be used for sterilizing or clarifying organic solutions. There are also specialized filter units to protect hemodialysis transducers from blood and moisture. The 50 mm Millex filter units are especially useful for vacuum line protection. All units are bi-directional.
Features & Benefits:
•Specialized filter units protect hemodialysis transducers from blood and moisture
•50 mm Millex units ideal for vacuum line protection
•All Millex Hydrophobic PTFE units are bi-directional in flow
Applications:
Sterilizing Gases, Vacuum Line Protection, Venting Sterile Containers, Sterilizing and Clarifying Organic Solutions
Filter Code: FGApplicationDirect patient care: NoPhysical formColor Code: Blue inlet/blue outletPreparation NoteSterilization Method
Ethylene oxideOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilizing of gases, venting sterile containers, and sterilizing or clarifying aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, PVC housing Quality Level 400 sterility sterile; ethylene oxide treated product line Millex® feature holdup volume< 0.1 mL, hydrophobic Торговая марка Millex® availability available only in Canada, Japan, Malaysia, Thailand, USA, Australia, Europe parameter 100 mL process volume, 45 °C max. temp., 5.2 bar max. inlet pressure (75 psi) H 19.7 mm diam. 2.5 cm filter diam. 25 mm filtration area 3.9 cm2 matrix Fluoropore® pore size 0.2 µm pore size input sample type neural stem cell(s)
sample type: mouse embryonic stem cell(s)
sample type cardiac stem cell(s)
sample type mesenchymal stem cell(s)
sample type: human embryonic stem cell(s)
sample type hematopoietic stem cell(s)
sample type epithelial cells
sample type induced pluripotent stem cell(s)
sample type pancreatic stem cell(s)test parameters sample volume: 100 mL fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer-Lok® outlet connection, male Luer-Lok® outlet fitting Featured Industry Industrial QC (air/gas/organic solvent filtration and venting) shipped in ambient 628,25 € / 61 306 ₽Получить предложение -
Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm
eCl@ss: 32031690 NACRES: NB.22
Кат. номер SLFG85010 SLFG85000 General descriptionMillex® syringe filter units with hydrophobic Fluoropore or Millipore Express PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore membrane can also be used for sterilizing or clarifying organic solutions. There are also specialized filter units to protect hemodialysis transducers from blood and moisture. The 50 mm Millex filter units are especially useful for vacuum line protection. All units are bi-directional.
Features & Benefits:
•Specialized filter units protect hemodialysis transducers from blood and moisture
•50 mm Millex units ideal for vacuum line protection
•All Millex Hydrophobic PTFE units are bi-directional in flow
Applications:
Sterilizing Gases, Vacuum Line Protection, Venting Sterile Containers, Sterilizing and Clarifying Organic Solutions
Filter Code: FGApplicationA 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10.Physical formColor Code: Natural inlet/natural outletPreparation NoteSterilization Method
AutoclavableOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilizing of gases, venting sterile containers, and sterilizing or clarifying aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 0.1 mL, hydrophobic Торговая марка Millex® parameter 121 °C max. temp., 4.1 bar max. inlet pressure (60 psi) application(s) sample preparation: suitable (analytical) H 71 mm diam. 5 cm filter diam. 50 mm filtration area 19.6 cm2 matrix Fluoropore® pore size 0.2 µm pore size test parameters sample volume: 4 L fitting inlet stepped hose barb (with Female Luer slip interior), outlet stepped hose barb (with Female Luer slip interior) shipped in ambient от 31 592 до 239 078 ₽Получить предложение -
Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm SLFG55010
eCl@ss: 32031690 NACRES: NB.22 General descriptionMillex® syringe filter units with hydrophobic Fluoropore or Millipore Express PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore membrane can also be used for sterilizing or clarifying organic solutions. There are also specialized filter units to protect hemodialysis transducers from blood and moisture. The 50 mm Millex filter units are especially useful for vacuum line protection. All units are bi-directional.
Features & Benefits:
•Specialized filter units protect hemodialysis transducers from blood and moisture
•50 mm Millex units ideal for vacuum line protection
•All Millex Hydrophobic PTFE units are bi-directional in flow
Applications:
Sterilizing Gases, Vacuum Line Protection, Venting Sterile Containers, Sterilizing and Clarifying Organic Solutions
Filter Code: FGApplicationA 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10.Physical formColor Code: Natural inlet/natural outletPreparation NoteSterilization Method
AutoclavableOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilizing of gases, venting sterile containers, and sterilizing or clarifying aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 0.1 mL, hydrophobic Торговая марка Millex® parameter 121 °C max. temp., 4 L process volume, 4.1 bar max. inlet pressure (60 psi) application(s) sample preparation: suitable (analytical) H 64 mm diam. 5 cm filter diam. 50 mm filtration area 19.6 cm2 matrix Fluoropore® pore size 0.2 µm pore size test parameters sample volume: 4 L fitting inlet stepped hose barb (with Female Luer slip interior), 1/8 in. male NPT outlet connection, 1/8 in. male NPT outlet fitting shipped in ambient 330,41 € / 32 242 ₽Получить предложение -
Millex-GN for Samplicity G2, 0.20 µm, nylon, 33 mm, non-sterile SAMP2GNNB
eCl@ss: 32031690 General descriptionFilter Code: GN
Overview of Millex® Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials
• Millex Filters for the Samplicity G2 System provide adaptor funnels and Millex 33 mm filters
• Samplicity G2 System has lower ergonomic impact than manual syringe filtration
• Available in 0.20 µm and 0.45 µm pore sizes with Durapore PVDF, Millipore Express PLUS PES, or nylon membranes
Available in 2 Pack Sizes:
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 devices (4x 250 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLCPackaging250 ea in non sterile
non sterileApplicationDirect patient care: NoComponentsMillex Filter and easy fill funnelSpecificationsFor general laboratory use onlyPhysical formColor Code: PurpleLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material Nylon membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 80 µL (after air purge), hydrophilic Торговая марка Millex®, Samplicity® parameter 2 mL process volume (limited by vial volume), 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi) application(s) sample preparation: suitable (analytical) filter diam. 33 mm filtration area 4.5 cm2 pore size 0.2 µm pore size input sample type aqueous solution(s)
sample type mild organic solution(s)bubble point 2.9 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex-GP Filter for Samplicity G2, 0.22 µm, PES 33 mm, non-sterile SAMP2GPNB
eCl@ss: 32031690 General descriptionFilter Code: GP
Overview of Millex® Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials
• Millex Filters for the Samplicity G2 System provide adaptor funnels and Millex 33 mm filters
• Samplicity G2 System has lower ergonomic impact than manual syringe filtration
• Available in 0.20 µm and 0.45 µm pore sizes with Durapore PVDF, Millipore Express PLUS PES, or nylon membranes
Available in 2 Pack Sizes:
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 devices (4x 250 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLCPackaging250 ea in non sterile
non sterileApplicationDirect patient care: NoComponentsMillex Filter and easy fill funnelSpecificationsFor general laboratory use onlyPhysical formColor Code: GreenLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material polyethersulfone membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 80 µL (after air purge), hydrophilic Торговая марка Millex®, Samplicity® parameter 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi) application(s) sample preparation: suitable (analytical) filter diam. 33 mm filtration area 4.5 cm2 matrix Millipore Express® pore size 0.22 µm pore size input sample type aqueous solution(s) bubble point 4.3 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex-GP Filter, 0.22 µm SLGPB5010
eCl@ss: 32031690 NACRES: NB.22 General descriptionMillex® syringe filter units with hydrophobic Fluoropore or Millipore Express PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore membrane can also be used for sterilizing or clarifying organic solutions. There are also specialized filter units to protect hemodialysis transducers from blood and moisture. The 50 mm Millex filter units are especially useful for vacuum line protection. All units are bi-directional.
Features & Benefits:
•Specialized filter units protect hemodialysis transducers from blood and moisture
•50 mm Millex units ideal for vacuum line protection
•All Millex Hydrophobic PTFE units are bi-directional in flow
Applications:
Sterilizing Gases, Vacuum Line Protection, Venting Sterile Containers, Sterilizing and Clarifying Organic Solutions
Filter Code: GPApplicationDirect patient care: No
A 50 mm diameter sterile syringe filter with a 0.22 µm pore size Polyethersulfone membrane. Comes in a pack of 10.Physical formColor Code: Clear inlet/clear outletPreparation NoteSterilization Method
Gamma irradiationOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilizing of gases, venting sterile containers, and sterilizing or clarifying aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationEXPRESS PLUS is a trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial methacrylate-butadiene-styrene (MBS) , methacrylate-butadiene-styrene (MBS) housing, polyethersulfone membrane Quality Level 400 sterility sterile; -irradiated product line Millex® feature holdup volume< 1 mL, hydrophilic Торговая марка Millex® availability available only in Japan, Thailand, Malaysia, Europe, USA, Canada, Australia parameter 3.5 bar max. inlet pressure (50 psi), 4 L process volume, 45 °C max. temp. application(s) sterile filtration: suitable (sterilization of tissue culture media, protein solutions or aqueous solutions) H 96 mm diam. 5 cm filter diam. 50 mm filtration area 19.6 cm2 matrix Express PLUS™ pore size 0.22 µm pore size input sample type: human embryonic stem cell(s)
sample type hematopoietic stem cell(s)
sample type mesenchymal stem cell(s)
sample type neural stem cell(s)
sample type pancreatic stem cell(s)
sample type: mouse embryonic stem cell(s)
sample type cardiac stem cell(s)
sample type induced pluripotent stem cell(s)
sample type epithelial cellstest parameters sample volume: 4 L fitting inlet stepped hose barb (with Female Luer slip interior), inlet/outlet filling bell, outlet filling bell shipped in ambient Узнать цену -
Millex-GV Filter for Samplicity G2, 0.22 µm, PVDF, 33 mm, non-sterile SAMP2GVNB
eCl@ss: 32031690 General descriptionOverview of Millex® Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials
• Millex Filters for the Samplicity G2 System provide adaptor funnels and Millex 33 mm filters
• Samplicity G2 System has lower ergonomic impact than manual syringe filtration
• Available in 0.20 µm and 0.45 µm pore sizes with Durapore PVDF, Millipore Express PLUS PES, or nylon membranes
Available in 2 Pack Sizes:
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 devices (4x 250 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLC
Filter Code: GVPackaging250 ea in non sterile
non sterileApplicationDirect patient care: No
This 33 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.22 µm pore size used in preparation of protein-containing solutions prior to chromatography or other instrument analyses.ComponentsMillex Filter and easy fill funnelSpecificationsFor general laboratory use onlyPhysical formColor Code: YellowLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, polypropylene , polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 80 µL (after air purge), hydrophilic Торговая марка Millex®, Samplicity® parameter 2 mL process volume (limited by vial volume), 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi) application(s) sample preparation: suitable (analytical) filter diam. 33 mm filtration area 4.5 cm2 matrix Durapore® pore size 0.22 µm pore size input sample type aqueous solution(s)
sample type mild organic solution(s)bubble point 3.45 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex-GV Filter, 0.22 µm SLGV004SL
eCl@ss: 32031690 NACRES: NB.22 General descriptionFilter Code: GV
Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.
Features & Benefits:
•Tailored to a variety of applications based on membrane type, housing and validation rating
•Medical Device-rated devices in some countries including vented devices for direct patient care
•Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
•Low extractables and low absorption membranes for minimum sample losses
•Faster flow rates and higher operating pressures for high performance needs
Applications:
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule Components, Select Medical Device Applications (Some Including Direct Patient Care Depending on Country/Region)ApplicationDirect patient care: No
A 4 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 100.Physical formColor Code: Natural inlet/natural outletPreparation NoteSterilization Method
Ethylene oxideOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of user guide (packaged in box)
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, high-density polyethylene housing Quality Level 400 sterility sterile; ethylene oxide treated product line Millex® feature holdup volume< 10 µL, hydrophilic Торговая марка Millex® availability available only in Thailand, Japan, Malaysia, Canada, Australia, Europe, USA parameter 14 bar max. inlet pressure (200 psi), 45 °C max. temp. application(s) sterile filtration: suitable (sterilization of tissue culture media, protein solutions or aqueous solutions) H 19.7 mm diam. 0.4 cm filter diam. 4 mm filtration area 0.1 cm2 matrix Durapore® pore size 0.22 µm pore size input sample type mesenchymal stem cell(s)
sample type: human embryonic stem cell(s)
sample type cardiac stem cell(s)
sample type hematopoietic stem cell(s)
sample type neural stem cell(s)
sample type: mouse embryonic stem cell(s)
sample type epithelial cells
sample type induced pluripotent stem cell(s)
sample type pancreatic stem cell(s)test parameters sample volume: 1 mL fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet stepped slip shipped in ambient Узнать цену -
Millex-HN, 0.45 for Samplicity G2 µm, nylon, 33 mm, non-sterile SAMP2HNNB
eCl@ss: 32031690 General descriptionOverview of Millex® Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials
• Millex Filters for the Samplicity G2 System provide adaptor funnels and Millex 33 mm filters
• Samplicity G2 System has lower ergonomic impact than manual syringe filtration
• Available in 0.20 µm and 0.45 µm pore sizes with Durapore PVDF, Millipore Express PLUS PES, or nylon membranes
Available in 2 Pack Sizes:
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 devices (4x 250 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLC
Filter Code: HNPackaging250 ea in non sterile
non sterileApplicationDirect patient care: No
This 33 mm syringe filter with a Hydrophilic Nylon membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.ComponentsMillex Filter and easy fill funnelSpecificationsFor general laboratory use onlyPhysical formColor Code: PurpleLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material Nylon membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 80 µL (after air purge), hydrophilic Торговая марка Millex®, Samplicity® parameter 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi) application(s) sample preparation: suitable (analytical) filter diam. 33 mm filtration area 4.5 cm2 pore size 0.45 µm pore size input sample type mild organic solution(s)
sample type aqueous solution(s)bubble point 2.2 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex-HP 0.45 for Samplicity G2 µm, PES 33 mm, non-sterile SAMP2HPNB
eCl@ss: 32031690 General descriptionFilter Code: HPPackaging250 ea in non sterile
non sterileApplicationDirect patient care: No
This 33 mm syringe filter with a Hydrophilic Polyethersulfone membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous solutions prior to chromatography or other instrument analyses.ComponentsMillex Filter and easy fill funnelSpecificationsFor general laboratory use onlyPhysical formColor Code: GreenLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material polyethersulfone membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 80 µL (after air purge), hydrophilic Торговая марка Millex®, Samplicity® parameter 2 mL process volume (limited by vial volume), 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi) application(s) sample preparation: suitable (analytical) filter diam. 33 mm filtration area 4.5 cm2 matrix Millipore Express® pore size 0.45 µm pore size input sample type aqueous solution(s) bubble point 2 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
