Laboratory Filter Membranes
- Сортировать:
- Вид таблицей
-
Absorbent Pad AP1004700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: AP10
Filter Type: Depth filterПараметрыmaterial cellulose fiber , plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Millipore parameter 5.8 mL/min-cm2 water flow rate filter diam. 47 mm thickness 0.031-0.039 in. shipped in ambient 112,23 € / 10 862 ₽Получить предложение -
Absorbent Pad AP1002500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: AP10
Filter Type: Depth filterApplication25 mm, cellulose support pads are used to reinforce filters in Millipore′s monitors for contamination analysis. When saturated with growth medium, they can also be used for culturing microorganisms on membranes. Comes in a pack of 100.Параметрыmaterial cellulose fiber , plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Millipore parameter 5.8 mL/min-cm2 water flow rate filter diam. 25 mm thickness 0.031-0.039 in. shipped in ambient 111,57 € / 10 798 ₽Получить предложение -
Absorbent Pad AP1003700
eCl@ss: 32031602 NACRES: NB.24 Application37 mm, cellulose support pads are used to reinforce filters in Millipore′s monitors for contamination analysis. When saturated with growth medium, they can also be used for culturing microorganisms on membranes. Comes in a pack of 100.Параметрыmaterial cellulose fiber , plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Millipore parameter 5.8 mL/min-cm2 water flow rate filter diam. 37 mm thickness 0.031-0.039 in. shipped in ambient 132,47 € / 12 821 ₽Получить предложение -
Biopore Membrane Filter roll, Hydrophilic PTFE BGCM00010
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: BGCMLegal InformationBIOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PTFE membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Millipore filter L x W 30 cm x 3 m thickness 40 µm matrix Biopore™ pore size 0.4 µm pore size shipped in ambient Узнать цену -
Charged Durapore® Membrane Filter, 0.22 µm CCGL09025
eCl@ss: 32031602 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility.
Our Charged Hydrophlic Durapore membrane (CCGL) has a positive net charge which allows the membrane disc to separate negatively charged particles that are smaller than the rated pore size of the disc from the liquid solution.
Filter Type: Screen filterApplication0.22 µm pore size, charged hydrophilic PVDF, 90 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF , plain filter, white filter feature hydrophilic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 90 mm thickness 125 µm , typical gravimetric extractables 0.5% matrix Durapore® pore size 0.22 µm pore size, 70 % porosity bubble point 3.45 bar, air with water at 23 °C Узнать цену -
Durapore® Hydrophilic PVDF Membrane DVPP09050
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filter
Filter Code: DVPPApplication0.65 µm pore size, hydrophilic PVDF, 90 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >6 mL/min-cm2 water flow rate, 85 °C max. temp., 9 L/min-cm2 air flow rate filter diam. 90 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.65 µm pore size, 70 % porosity bubble point 1.10 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 595,00 € / 57 587 ₽Получить предложение -
Durapore® Hydrophilic PVDF Membrane DVPP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filter
Filter Code: DVPPApplication0.65 µm pore size, hydrophilic PVDF, 13 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >6 mL/min-cm2 water flow rate, 85 °C max. temp., 9 L/min-cm2 air flow rate filter diam. 13 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.65 µm pore size, 70 % porosity capacity 4 µg/cm2 binding capacity (protein) bubble point 1.10 bar, air with water at 23 °C shipped in ambient 255,50 € / 24 729 ₽Получить предложение -
Durapore® Membrane Filter, 0.1 µm VVLP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.1 µm pore size, hydrophilic PVDF, 47 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >0.33 mL/min-cm2 water flow rate, 0.15 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 47 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.1 µm pore size, 70 % porosity bubble point 5.0 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 418,25 € / 40 480 ₽Получить предложение -
Durapore® Membrane Filter, 0.1 µm VVLP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: VVLPApplication0.1 µm pore size, hydrophilic PVDF, 25 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >0.33 mL/min-cm2 water flow rate, 0.15 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 25 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.1 µm pore size, 70 % porosity bubble point 5.0 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 308,00 € / 29 810 ₽Получить предложение -
Durapore® Membrane Filter, 0.1 µm VVLP09050
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: VVLPApplication0.1 µm pore size, hydrophilic PVDF, 90 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >0.33 mL/min-cm2 water flow rate, 0.15 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 90 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.1 µm pore size, 70 % porosity bubble point 5.0 bar, air with water at 23 °C shipped in ambient 638,75 € / 61 822 ₽Получить предложение -
Durapore® Membrane Filter, 0.1 µm VVLP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: VVLP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recoveryApplication0.1 µm pore size, hydrophilic PVDF, 13 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >0.33 mL/min-cm2 water flow rate, 0.15 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 13 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.1 µm pore size, 70 % porosity capacity 4 µg/cm2 binding capacity (protein) bubble point 5.0 bar, air with water at 23 °C shipped in ambient 255,50 € / 24 729 ₽Получить предложение -
Durapore® Membrane Filter, 0.1 µm VVHP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: VVHPApplication0.1 µm pore size, hydrophobic PVDF, 47 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >0.33 mL/min-cm2 water flow rate, 3 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 47 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.1 µm pore size, 70 % porosity capacity 150 µg/cm2 binding capacity (protein) bubble point 1.8 bar, air with methanol at 23 °C shipped in ambient 405,44 € / 39 241 ₽Получить предложение -
Durapore® Membrane Filter, 0.1 µm VVLP00010
eCl@ss: 32031602 General descriptionFilter Type: Screen filterApplication0.1 µm pore size, hydrophilic PVDF, 30cm x 3m roll membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF , plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >0.33 mL/min-cm2 water flow rate, 0.15 L/min-cm2 air flow rate, 85 °C max. temp. filter L x W 30 cm x 3 m , roll thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.1 µm pore size, 70 % porosity bubble point 5.0 bar, air with water at 23 °C Узнать цену -
Durapore® Membrane Filter, 0.1 µm VVLP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.1 µm pore size, hydrophilic PVDF, 142 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >0.33 mL/min-cm2 water flow rate, 0.15 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 142 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.1 µm pore size, 70 % porosity bubble point 5.0 bar, air with water at 23 °C shipped in ambient 952,00 € / 92 140 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVWP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: GVWP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.22 µm pore size, hydrophilic PVDF, 25 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 25 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 70 % porosity bubble point 3.45 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 351,26 € / 33 997 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVHP04700
eCl@ss: 32031602 NACRES: NB.24 Application0.22 µm pore size, hydrophobic PVDF, 47 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 16 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 47 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 75 % porosity capacity 150 µg/cm2 binding capacity (protein) bubble point 1.24 bar, air with methanol at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 632,06 € / 61 174 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVHP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Code: GVHP
Filter Type: Screen filterApplication0.22 µm pore size, hydrophobic PVDF, 25 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 16 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 25 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 75 % porosity bubble point 1.24 bar, air with methanol at 23 °C shipped in ambient 442,75 € / 42 852 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVWP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: GVWP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.22 µm pore size, hydrophilic PVDF, 142 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 142 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 70 % porosity bubble point 3.45 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 1 105,17 € / 106 964 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVWP09050
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: GVWP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 90 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 70 % porosity bubble point 3.45 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 615,40 € / 59 562 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVWP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: GVWP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.22 µm pore size, hydrophilic PVDF, 13 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 13 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 70 % porosity capacity 4 µg/cm2 binding capacity (protein) bubble point 3.45 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 278,63 € / 26 967 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVHP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Code: GVHP
Filter Type: Screen filterApplication0.22 µm pore size, hydrophobic PVDF, 142 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 16 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 142 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 75 % porosity bubble point 1.24 bar, air with methanol at 23 °C shipped in ambient 1 387,54 € / 134 294 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVHP00010
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Code: GVHP
Filter Type: Screen filterOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 16 L/min-cm2 air flow rate, 85 °C max. temp. L 10 ft thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 75 % porosity bubble point 1.24 bar, air with methanol at 23 °C shipped in ambient 969,50 € / 93 833 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVWP00010
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: GVWP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp. roll W x L 1 ft x 10 ft thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 75 % porosity capacity 4 µg/cm2 binding capacity (protein) bubble point 3.45 bar, air with water at 23 °C shipped in ambient Узнать цену -
Durapore® Membrane Filter, 0.22 µm GVHP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Code: GVHP
Filter Type: Screen filterApplication0.22 µm pore size, hydrophobic PVDF, 13 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 16 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 13 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 75 % porosity bubble point 1.24 bar, air with methanol at 23 °C shipped in ambient 369,24 € / 35 737 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVWP10050
eCl@ss: 32031602 NACRES: NB.24 Application0.22 µm pore size, hydrophilic PVDF, 100 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter feature hydrophilic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 100 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 70 % porosity bubble point 3.45 bar, air with water at 23 °C shipped in ambient 806,75 € / 78 082 ₽Получить предложение -
Durapore® Membrane Filter, 0.22 µm GVHP09050
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Code: GVHP
Filter Type: Screen filterApplication0.22 µm pore size, hydrophobic PVDF, 90 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >1 mL/min-cm2 water flow rate, 16 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 90 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.22 µm pore size, 75 % porosity bubble point 1.24 bar, air with methanol at 23 °C shipped in ambient 871,96 € / 84 393 ₽Получить предложение -
Durapore® Membrane Filter, 0.45 µm HVLP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: HVLP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.45 µm pore size, hydrophilic PVDF, 25 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 4 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 25 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 70 % porosity bubble point 1.55 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 322,18 € / 31 182 ₽Получить предложение -
Durapore® Membrane Filter, 0.45 µm HVLP09050
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: HVLP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.45 µm pore size, hydrophilic PVDF, 90 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 4 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 90 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 70 % porosity bubble point 1.55 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 642,25 € / 62 160 ₽Получить предложение -
Durapore® Membrane Filter, 0.45 µm HVHP04700
eCl@ss: 32031602 General descriptionFilter Code: HVHP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.45 µm pore size, hydrophobic PVDF, 47 mm membraneLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 20 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 47 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 75 % porosity capacity 150 µg/cm2 binding capacity (protein) bubble point 0.6 bar, air with methanol at 23 °C shipped in ambient 613,59 € / 59 387 ₽Получить предложение -
Durapore® Membrane Filter, 0.45 µm HVHP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: HVHP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.45 µm pore size, hydrophobic PVDF, 25 mm membraneLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 20 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 25 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 75 % porosity bubble point 0.6 bar, air with methanol at 23 °C shipped in ambient 442,75 € / 42 852 ₽Получить предложение -
Durapore® Membrane Filter, 0.45 µm HVWG04700
eCl@ss: 32031602 NACRES: NB.24 General description- Durapore® membrane filters are ideal for monitoring particulate contamination in air, clarification and sterilization of fluids.
- Membranes offers broad chemical compatibility, provides high flow rates and throughput, low extractables.
- Hydrophillic Polyvinylidene fluoride (PVDF) have lowest protein binding to minimize interaction with samples and maximize recovery.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, gridded filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 4 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 47 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 70 % porosity bubble point 1.55 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 Узнать цену -
Durapore® Membrane Filter, 0.45 µm HVLP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: HVLP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.45 µm pore size, hydrophilic PVDF, 13 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 4 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 13 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 70 % porosity capacity 4 µg/cm2 binding capacity (protein) bubble point 1.55 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 278,63 € / 26 967 ₽Получить предложение -
Durapore® Membrane Filter, 0.45 µm HVLP00010
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: HVLP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.45 µm pore size, hydrophilic PVDF, 1 foot by 10 foot rollOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 4 L/min-cm2 air flow rate, 85 °C max. temp. thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 70 % porosity bubble point 1.55 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 1 641,50 € / 158 873 ₽Получить предложение -
Durapore® Membrane Filter, 0.45 µm HVHP09050
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: HVHP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.45 µm pore size, hydrophobic PVDF, 90 mm membraneLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 20 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 90 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 75 % porosity bubble point 0.6 bar, air with methanol at 23 °C shipped in ambient 840,00 € / 81 300 ₽Получить предложение -
Durapore® Membrane Filter, 0.45 µm HVLP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: HVLP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.45 µm pore size, hydrophilic PVDF, 142 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 4 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 142 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 70 % porosity bubble point 1.55 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 1 043,79 € / 101 024 ₽Получить предложение -
Durapore® Membrane Filter, 0.45 µm HVHP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: HVHP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterApplication0.45 µm pore size, hydrophobic PVDF, 142 mm membraneLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 20 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 142 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 75 % porosity bubble point 0.6 bar, air with methanol at 23 °C shipped in ambient 1 312,50 € / 127 031 ₽Получить предложение -
Durapore® Membrane Filter, 0.45 µm HVHP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: HVHP
Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filterLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophobic Торговая марка Durapore®, Millipore parameter >2.6 mL/min-cm2 water flow rate, 20 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 13 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.45 µm pore size, 75 % porosity capacity 4 µg/cm2 binding capacity (protein) bubble point 0.6 bar, air with methanol at 23 °C shipped in ambient 376,25 € / 36 415 ₽Получить предложение -
Durapore® Membrane Filter, 0.65 µm DVPP08250
eCl@ss: 32031602 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filter
Filter Code: DVPPApplication0.65 µm pore size, hydrophilic PVDF, 82 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >6 mL/min-cm2 water flow rate, 85 °C max. temp., 9 L/min-cm2 air flow rate filter diam. 82 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.65 µm pore size, 70 % porosity bubble point 1.10 bar, air with water at 23 °C shipped in ambient 479,50 € / 46 409 ₽Получить предложение -
Durapore® Membrane Filter, 0.65 µm DVPP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filter
Filter Code: DVPPApplication0.65 µm pore size, hydrophilic PVDF, 142 mm membraneOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >6 mL/min-cm2 water flow rate, 85 °C max. temp., 9 L/min-cm2 air flow rate filter diam. 142 mm thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.65 µm pore size, 70 % porosity bubble point 1.10 bar, air with water at 23 °C shipped in ambient 983,50 € / 95 188 ₽Получить предложение -
Durapore® Membrane Filter, 0.65 µm DVPP00010
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filter
Filter Code: DVPPOther NotesDirections for Use- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 µm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 µm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >6 mL/min-cm2 water flow rate, 85 °C max. temp., 9 L/min-cm2 air flow rate L 10 ft thickness 125 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 0.65 µm pore size, 70 % porosity capacity 4 µg/cm2 binding capacity (protein) bubble point 1.10 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 Узнать цену -
Durapore® Membrane Filter, 0.65 µm DVPP29325
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
Filter Code: DVPPApplication0.65 µm pore size, hydrophilic PVDF, 293 mm membraneLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore filter diam. 293 mm thickness 125 µm matrix Durapore® pore size 0.65 µm pore size shipped in ambient Узнать цену -
Durapore® Membrane Filter, 5.0 µm SVLP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filter
Filter Code: SVLPApplication5.0 µm pore size, hydrophilic PVDF, 47 mm membraneLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >15.4 mL/min-cm2 water flow rate, 32 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 47 mm thickness 160 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 5.0 µm pore size, 70 % porosity bubble point 0.2 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 495,25 € / 47 933 ₽Получить предложение -
Durapore® Membrane Filter, 5.0 µm SVLP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filter
Filter Code: SVLPApplication5.0 µm pore size, hydrophilic PVDF, 25 mm membraneLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >15.4 mL/min-cm2 water flow rate, 32 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 25 mm thickness 160 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 5.0 µm pore size, 70 % porosity bubble point 0.2 bar, air with water at 23 °C shipped in ambient
Safety InformationWGK Germany WGK 3 311,50 € / 30 149 ₽Получить предложение -
Durapore® Membrane Filter, 5.0 µm SVLP09050
eCl@ss: 32031602 NACRES: NB.24 General descriptionDurapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Filter Type: Screen filter
Filter Code: SVLPApplication5.0 µm pore size, hydrophilic PVDF, 90 mm membraneLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400, material PVDF membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Durapore®, Millipore parameter >15.4 mL/min-cm2 water flow rate, 32 L/min-cm2 air flow rate, 85 °C max. temp. filter diam. 90 mm thickness 160 µm gravimetric extractables 0.5% refractive index n/D 1.42 matrix Durapore® pore size 5.0 µm pore size, 70 % porosity bubble point 0.2 bar, air with water at 23 °C shipped in ambient 743,75 € / 71 984 ₽Получить предложение
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
