- Производитель:
- CAT M. Zipperer
The great advantage of this design is its valve less construction, ensuring minimal dead volume.
These motor driven models have the option to preset volume and dosing speed. So they are usable as a burette or as a dispenser.
Small dimensions and a low weight prevent a top-heavy system.
All wetted parts are made of Al2O3 and ETFE, both provided with an excellent chemical resistance to almost all liquids in the lab.
The Contiburettes are equipped with a calibration function to compensate the deviation of accuracy when using a liquid with a significant different density than water.
A variety of reservoir adaptors allow for mounting to every laboratory bottle.
Technical Data:
| Model | µ 1D | µ 10D | µ 20D |
| Subdivision | 1 µl | 10 µl | 20 µl |
| Drive takes place via | motor | motor | motor |
| Flowrate | 0,02 - 2,0 ml/min | 0,2 - 20,0 ml/min | 0,3 - 30,0 ml/min |
| Calibration function | yes | yes | yes |
| Interface RS 485 | yes | yes | yes |
| Integrated rinsing system | - | - | - |
| Temperature range | 10° - 40°C | 10° - 40°C | 10° - 40°C |
| Power supply | 9 V DC | 9 V DC | 9 V DC |
| Dimensions HxWxD (mm) | 175 x 112 x 60 | 175 x 112 x 60 | 175 x 112 x 60 |
| Part No. | 62730-00 | 62732-00 | 62734-00 |
Materials which come into contact with the dispensed Liquids:
Aluminium oxide Al2O3 (99.7%) Sapphire hard, fused crystalline alumina - excellent chemical resistance to most commonly used fluids - mechanically resistant to common abrasives.
ETFE & FEP Excellent chemical resistance characteristics.
Accessories
Power supply 9 Volt, Input 100 – 240 V PN 60736-00
Filling tube, 300 mm long PN 60700-00
Discharge tube, bended, with fine tip PN 60702-00
Titrating tube, 1 m long PN 60701-00
Adapter for Contiburettes of Polypropylene
A32-25 PN 60703-00
A32-28 PN 60704-00
A32-38 PN 60705-00
A32-40 PN 60706-00
A32-45 PN 60707-00
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.